Greenheck Fan Smoke Alarm FSD M211 User Manual

Combination FIRE SMOKE DAMPERS  
Model FSD-M211  
Steel 3V Blades  
Application  
Model FSD-M211 is a combination fire smoke damper with 3V style  
blades. The FSD-M211 has been qualified to 10.2 m/s and 1 kPa for  
operation and dynamic closure in emergency fire smoke situations.  
Model FSD-M211 may be installed vertically (with blades running  
horizontal) or horizontally and is rated for airflow and leakage in  
either direction.  
UL 555S Leakage Class I  
UL555 112 Hour Fire Resistance Rating  
4 Hour Fire Resistance Rating (BS476)  
Model FSD-M211 meets the requirements for fire  
dampers, smoke dampers and combination fire  
smoke dampers established by:  
Model FSD-M211 has also been tested in accordance with BS476 to  
4 hours at Warrington Fire, UK, and is approved for fire partitions of  
4 hours or less where British Standards are required.  
National Fire Protection Association  
NFPA Standards 80, 90A, 92A, 92B, 101, & 105  
IBC International Building Codes  
ICBO Uniform Building Codes  
SBCCI Standard Building Codes  
British Standard BS476  
Ratings  
UL 555 Fire Resistance Rating  
Fire Rating:  
Dynamic Closure Rating: Actual ratings are size dependant  
112 Hours  
Maximum Velocity:  
Maximum Pressure:  
10.2 m/s  
1 kPa  
Tested to 4 hours at Warrington Fire, UK  
“UL CLASSIFIED (see complete marking on  
product)”  
“UL CLASSIFIED to Canadian safety standards  
(see complete marking on product)”  
Standard 555 & 555S (Listing #R13317)  
UL 555S Leakage Rating  
Leakage Class:  
Operational Rating: Actual ratings are actuator dependant  
Maximum Velocity:  
Maximum Pressure:  
Max. Temperature:  
I
10.2 m/s  
1 kPa  
177°C —Depending on actuator  
Greenheck Kunshan Co. Ltd. and Greenheck Fan  
Corporation certifies that the model FSD-M211  
shown herein is licensed to bear the AMCA Seal. The  
BS476 Fire Resistance Rating  
Fire Rating:  
4 hours  
ratings shown are based on tests and procedures  
performed in accordance with AMCA Publication  
AIR  
PERFORMANCE  
Standard Construction  
511 and comply with the requirements of the AMCA  
Certified Ratings Programs. The AMCA Certified  
AIR  
MOVEMENT  
Frame:  
127mm x 25mm galv. steel hat  
channel with reinforced corners . A  
low profile head and sill are used on  
sizes less than 432mm high to  
maximize free area and  
performance.  
AND CONTROL  
Ratings Seal applies to air performance ratings only.  
ASSOCIATION  
®
INTERNATIONAL, INC.  
Blades:  
Seals:  
1.5mm galvanized steel, reinforced  
with 3 longitudinal structurally  
designed vee’s.  
Extruded silicone rubber blade  
seals. Flexible stainless steel jamb  
seals.  
74°C RRL  
Concealed in jamb.  
13mm diameter plated steel  
Bronze sleeve type.  
W
Closure Device:  
Linkage:  
Axles:  
Bearings:  
Size Limitations  
Minimum Size:  
101mm W x 101mm H  
Maximum Size:  
Single Section:  
813mm W x 1270mm H  
or 914mm W x 914mm H  
3251mm W x 2540mm H Vertical  
or 3658mm W x 2438mm H  
Horizontal  
Multiple Section:  
RH  
H
Optional Features  
• Stainless steel bearings  
• 100°C, and 177°C RRL available (UL only)  
• 69°C fusible link (BS476)  
• Electric or pneumatic actuators to accomplish smoke  
management and system functions.  
• Sleeve with Integral flange on both sides available  
• RRL/OCI (open close indication)  
LH  
*W & H dimensions furnished approximately 6mm undersize.  
(Add sleeve thickness for overall sleeved damper dimension)  
Right hand drive is shown. Left hand drive is available upon request.  
• TOR (remote override of 74°C or 100°C closure allows damper to  
perform smoke management functions during a fire emergency)  
 
AMCA 5.2 Pressure Drop  
FSD-M211  
5D  
Figure 5.2  
7&-0$*5:ꢅ74ꢋꢅ13&4463&ꢅ%301  
ꢂꢃꢃꢃ  
ꢂꢃꢃ  
ꢂꢃ  
ꢄꢃꢁNNꢅYꢅꢄꢃꢁNN  
ꢆꢂꢃNNꢅYꢅꢆꢂꢃNN  
ꢇꢂꢈNNꢅYꢅꢇꢂꢈNN  
ꢄꢃꢁNNꢅYꢅꢂꢀꢂꢇNN  
ꢂꢀꢂꢇNNꢅYꢅꢄꢃꢁNN  
ꢀꢁꢀꢂꢃYꢃꢄꢅꢆ  
ꢄꢅꢆꢃYꢃꢄꢅꢆ  
ꢇꢀꢅꢃYꢃꢇꢀꢅ  
ꢄꢅꢆꢃYꢃꢀꢁꢀꢂ  
ꢂꢀꢈꢃYꢃꢂꢀꢈ  
ꢂꢃ  
ꢄꢃ  
'"$&ꢅ7&-0$*5:ꢅ.&5&34ꢊ4&$0/%  
".$"ꢅꢁꢋꢀ  
305mm x 1219mm  
1219mm x 305mm  
305mm x 305mm  
610mm x 610mm  
914mm x 914mm  
Velocity  
(m/s)  
Pressure  
Drop (Pa)  
Velocity  
(m/s)  
Pressure  
Drop (Pa)  
Velocity  
(m/s)  
Pressure  
Drop (Pa)  
Velocity  
(m/s)  
Pressure  
Drop (Pa)  
Velocity  
(m/s)  
Pressure  
Drop (Pa)  
2.5  
5.1  
3
2.5  
5.1  
8
2.5  
5.1  
10  
35  
2.5  
5
2.6  
5.1  
3
15  
27  
5.2  
17  
10  
7.6  
32  
7.7  
57  
7.7  
80  
7.8  
42  
7.6  
22  
10.3  
12.9  
15.3  
18  
57  
10.3  
12.9  
15.6  
17.9  
20.7  
105  
164  
242  
316  
424  
10  
135  
207  
311  
411  
561  
10.3  
12.9  
15.4  
18.1  
20.8  
72  
10.2  
12.7  
15.3  
17.7  
20.3  
42  
90  
12.6  
15.5  
17.8  
20.8  
115  
162  
224  
296  
65  
125  
174  
227  
95  
127  
167  
20.5  
Greenheck Kunshan Co. Ltd. and Greenheck Fan  
Corporation certifies that the model FSD-M211 shown  
herein is licensed to bear the AMCA Seal. The ratings  
shown are based on tests and procedures performed  
in accordance with AMCA Publication 511 and comply  
with the requirements of the AMCA Certified Ratings  
Programs. The AMCA Certified Ratings Seal applies to  
air performance ratings only.  
R
 
AMCA 5.3 Pressure Drop  
FSD-M211  
5D  
6D  
Figure 5.3  
7&-0$*5:ꢅ74ꢋꢅ13&4463&ꢅ%301  
ꢂꢃꢃꢃ  
ꢂꢃꢃ  
ꢂꢃ  
ꢄꢃꢁNNꢅYꢅꢄꢃꢁNN  
ꢆꢂꢃNNꢅYꢅꢆꢂꢃNN  
ꢇꢂꢈNNꢅYꢅꢇꢂꢈNN  
ꢄꢃꢁNNꢅYꢅꢂꢀꢂꢇNN  
ꢂꢀꢂꢇNNꢅYꢅꢄꢃꢁNN  
ꢂꢃ  
ꢄꢃ  
'"$&ꢅ7&-0$*5:ꢅ.&5&34ꢊ4&$0/%  
".$"ꢅꢁꢋꢄ  
305mm x 305mm  
610mm x 610mm  
914mm x 914mm  
305mm x 1219mm  
1219mm x 305mm  
Velocity  
(m/s)  
Pressure  
Drop (Pa)  
Velocity  
(m/s)  
Pressure  
Drop (Pa)  
Velocity  
(m/s)  
Pressure  
Drop (Pa)  
Velocity  
(m/s)  
Pressure  
Drop (Pa)  
Velocity  
(m/s)  
Pressure  
Drop (Pa)  
2.4  
5.1  
5
2.5  
5
3
2.5  
5.1  
3
8
2.5  
5.1  
3
2.5  
5.1  
5
22  
10  
10  
20  
7.8  
52  
7.7  
22  
7.6  
15  
27  
42  
62  
82  
107  
7.7  
25  
7.6  
40  
10.3  
12.9  
15.4  
17.7  
20.8  
92  
10.3  
12.8  
15.5  
17.9  
20.8  
40  
10.1  
12.8  
15.3  
17.7  
20.3  
10.3  
12.9  
15.7  
18.7  
20.9  
42  
10.1  
12.7  
15.3  
18  
72  
145  
209  
274  
379  
62  
67  
112  
164  
227  
299  
92  
100  
140  
174  
122  
167  
20.6  
Greenheck Kunshan Co. Ltd. and Greenheck Fan  
Corporation certifies that the model FSD-M211 shown  
herein is licensed to bear the AMCA Seal. The ratings  
shown are based on tests and procedures performed  
in accordance with AMCA Publication 511 and comply  
with the requirements of the AMCA Certified Ratings  
Programs. The AMCA Certified Ratings Seal applies to  
air performance ratings only.  
R
 
AMCA 5.5 Pressure Drop  
FSD-M211  
VELOCITY VS. PRESSURE DROP  
1000  
100  
10  
305mm x 305mm  
610mm x 610mm  
914mm x 914mm  
305mm x 1219mm  
1219mm x 305mm  
2
5
10  
30  
FACE VELOCITY- METERS/SECOND  
AMCA 5.5  
305mm x 305mm  
610mm x 610mm  
914mm x 914mm  
305mm x 1219mm  
1219mm x 305mm  
Velocity  
(m/s)  
Pressure  
Drop (Pa)  
Velocity  
(m/s)  
Pressure  
Drop (Pa)  
Velocity  
(m/s)  
Pressure  
Drop (Pa)  
Velocity  
(m/s)  
Pressure  
Drop (Pa)  
Velocity  
(m/s)  
Pressure  
Drop (Pa)  
2.5  
5
13  
2.5  
5
8
2.5  
5.1  
8
2.6  
5.1  
8
2.5  
5
1
55  
35  
30  
32  
42  
7.5  
122  
222  
349  
508  
688  
907  
7.6  
75  
7.7  
67  
7.7  
75  
7.7  
95  
10.2  
12.7  
15.4  
17.9  
20.6  
10.3  
12.8  
15.3  
17.7  
20.8  
140  
217  
309  
409  
568  
10.2  
12.9  
15.5  
18.1  
20.6  
115  
184  
269  
354  
471  
10.2  
12.7  
15.5  
18.1  
20.6  
130  
202  
301  
416  
536  
10.3  
12.7  
15.3  
17.9  
20.8  
172  
264  
381  
521  
707  
Greenheck Kunshan Co. Ltd. and Greenheck  
Fan Corporation certifies that the model FSD-  
M211 shown herein is licensed to bear the AMCA  
Seal. The ratings shown are based on tests and  
procedures performed in accordance with AMCA  
Publication 511 and comply with the requirements  
of the AMCA Certified Ratings Programs. The AMCA  
Certified Ratings Seal applies to air performance  
ratings only.  
R
 
Damper Sizing Information  
The following figures show maximum damper section size.  
Single Section  
W
152m.  
m
H
127.mm  
A
*
305mm  
Damper Sleeve Dimensional Data  
The drawings below and corresponding table show the position of the FSD-M211 damper when mounted in a factory sleeve.  
The standard mounting locations provide enough space for the mounting of actuators, controls and allow space for installation  
of retaining angles and duct connections.  
The "A" dimension is the location of the damper mounted  
38mm max.  
in a factory sleeve. The table below shows the Standard,  
Minimum, and Maximum “A” dimensions.  
95mm  
"A" Dimension  
in. (mm)  
Standard  
7 3/16 (183)  
12 (305)  
Maximum  
12 (305)  
12 (305)  
All Dampers*  
Varies  
152mm  
RH  
137mm  
A
When H is 11 in. (279mm) or  
less with OCI, RRL, or TOR  
LH  
Right hand drive is shown  
Left hand drive available upon request  
127mm  
*With the exception of dampers 10 in. high (254mm) or less.  
NOTE: Entire damper frame is not required to be installed within the  
wall. The damper blades, when closed should be contained within  
the wall.  
Sleeve Length  
Specifications  
Combination Fire Smoke Dampers meeting the following specifications shall  
be furnished and installed where shown on plans and/or as described in  
schedules. Dampers shall meet the requirements of the latest edition of NFPA  
80, 90A, 92A, 92B, 101, and 105.  
All UL 555 and 555S Dynamic Closure Ratings, Operational Ratings and  
Leakage Ratings shall be qualified for airflow and pressure in either direction  
through the damper. UL ratings shall allow for mounting damper vertically (with  
blades running horizontal) or horizontally.  
Dampers shall be tested, rated and labeled in accordance with the latest  
edition of UL Standards 555 and 555S. Dampers shall have a UL 555 fire rating  
of 1 ⁄2 hours. Each damper shall be equipped with a heat responsive device  
which has been tested and approved for use with the damper assembly in  
accordance with UL 555. The heat responsive device shall have a temperature  
rating of (specifier select one of the following) 74°C, 100°C, or 177°C. Dampers  
shall be UL labeled for use in dynamic systems. The damper shall have a  
dynamic closure airflow rating equal to or greater than the airflow at the  
damper’s installed location and a dynamic closure pressure rating of 1 kPa.  
The Damper Manufacturers submittal data shall certify all air performance  
pressure drop data is licensed in accordance with the AMCA Certified Ratings  
Program for Test Figures 5.2, 5.3 and 5.5. Damper air performance data shall  
be developed in accordance with the latest edition of AMCA Standard 500-D.  
Dampers shall be labeled with the AMCA Air Performance Seal.  
1
Damper blades shall be 1.5mm galvanized steel 3V type with three longitudinal  
grooves for reinforcement. Blades shall be completely symmetrical relative to  
their axle pivot point, presenting identical resistance to airflow and operation in  
either direction through the damper (blades that are non-symmetrical relative to  
their axle pivot point or utilize blade stops larger than 13mm are unacceptable).  
Dampers shall have a UL 555S Leakage rating of Class I and a Temperature  
rating of 177°C. Dampers shall have a UL 555S operational airflow rating equal  
to or greater than the airflow at its installed location and an operational pressure  
rating of 996 Pa. Damper actuators shall be factory mounted and qualified for  
use with the damper in accordance with UL 555S. Damper actuators shall  
be (specifier select one of the following) electric type for 120 (24 or 230) volt  
operation or pneumatic type for 25 psi minimum (30 psi maximum) operation.  
Manufacturers submittal data shall indicate actuator space requirements  
around the damper.  
Damper frames shall be galvanized steel formed into a structural hat channel  
shape with reinforced corners. Bearings shall be sintered bronze sleeve type  
rotating in extruded holes in the damper frame. Jamb seals shall be stainless  
steel compression type.  
Basis of design is Greenheck Model FSD-M211.  
GREENHECK  
Greenheck Kunshan Co Ltd.  
17 Qunyi Minying District • Kunshan Economic &  
Technical Development Zone  
Copyright © 2008 Greenheck Fan Corporation  
FSD-M211 Rev. 6 January 2008  
Kunshan, Jiangsu, China 215300  
Tel: 0512-573-66666 • Fax: 0512-573-78633  
 

Graco Water Dispenser 310554V User Manual
Haier Washer XPB60 111S User Manual
Hamilton Beach Kitchen Grill 840068300 User Manual
Harbor Freight Tools Bicycle Accessories 47996 User Manual
Heath Zenith Work Light UT 5512 BZ User Manual
Honeywell Stud Sensor C7189U User Manual
Honeywell Thermostat AQ1000TN2 User Manual
Hoshizaki Ice Maker F 500BAF( C) User Manual
Hotpoint Dishwasher FDEF 33121 User Manual
Hyundai MP3 Player H CDM8043 User Manual