Gitzo Medical Alarms PERS 2400 User Manual

PRODUCT DESCRIPTION  
OPERATION SUMMARY  
The PERS-2400 Console is a supervised wireless emergency reporting product designed for medical A variety of Linear’s transmitters can be used with the Console. Supervised and non-supervised  
alert applications. The table-top or wall-mount Console provides “pushbutton” emergency assistance to transmitters in DX or DXS format can be used. The Consoles three zones function as follows:  
PERS-2400  
anyone who desires additional security and peace of mind.  
EMERGENCY  
The Console has three emergency functions: emergency, fire, and activity. The emergency zone can be  
triggered by the large EMERGENCY button on the face of the Console or with various models of wireless  
transmitters.The fire zone can be triggered by wireless smoke alarms.The optional activity timer can be  
set for 8, 12 or 24 hour operation. If the time expires before an activity transmitter is activated, or the  
HOME button is pressed on the Console, the inactivity will trigger the emergency zone. For the visually  
impaired, each button on the Console is molded with braille characters to identify the button’s function.  
The Console is programmed using Linear’s RA-2400 remote access software. For details on  
using the RA-2400 software, refer to the software’s built-in help file.  
The Console can receive signals fromLinear’swirelessbattery-powered transmitterssending DX orDXS  
format signals. Up to 16 individual transmitters can be used with the Console. Activating a transmitter  
causes the Console’s built-in digital communicator to send the appropriate alarm report to the central  
monitoring station via the standard telephone network. In addition to the central station report, audible  
and visual indications occur and the alarm relay energizes during an emergency activation.  
If the optional Model VB-4 voice board is installed, the Console will “talk” to the user. The digitally  
synthesized, actual human voice, will sound “emergency”, “fire”, “timer done soon”, and other system  
operation, setup, and supervisory prompts from a 38 word vocabulary. In addition, the voice board  
supports 2-way automatic, 2-way manual, and 1-way listen-only audio emergency communications with  
central station monitoring personnel using the Console’s built-in high-sensivity microphone and speaker.  
Portable, supervised and non-supervised, pendant, belt-clip, or wristband type transmitters (Models  
DXT-41, DXT-42, DXT-61A, DXS-21, DXS-23, DXS-62, DXS-63) and stationary, supervised Model  
DXS-31 transmitters are used for medical alert applications. When this type of transmitter is triggered,  
the Console sounds a two-tone siren and an emergency report will be sent to the central station. The  
emergency zone can also be triggered by pressing the EMERGENCY button.  
PERSONAL  
EMERGENCY  
REPORTING  
SYSTEM  
FIRE  
Supervised Model DXS-72 wireless photoelectric smoke alarms can trigger the fire zone.When a smoke  
alarm is activated, the Console sounds a repeated series of three beeps and a fire report will be sent to  
the central station.  
ACTIVITY  
Supervised, switch or motion triggered transmitters (Models DXS-31/DXS-32 and DXS-54) can be used  
for ensuring human activity. The motion detector will monitor human presence in a room. The contact  
activated transmitter can be wired to a pushbutton or switch for manual activity monitoring. As long as a  
signal is received at least once every 8, 12, or 24 hours (programmable) an alarm will not be triggered.  
15 minutes before the programmed time expires, the HOME indicator will start blinking and a low pitched  
beep will sound every ten seconds.The activitytimer can beresetwithasignalfromoneofthesetransmitters  
or bypressing the HOMEbutton on the Console.Failure to receive asignalwithin the programmed time period  
will cause the Console to sound the two-tone emergency siren and report an inactivity alarm to the central  
Supervised transmitters regularly send status reports to the Console and low battery reports when their station. The activity timer can be turned on or off at the Console or through programming.  
batteries are low.When the Console receives a low battery report, the TROUBLE indicator flashes.If the  
WIRELESS INSTALLATION TIPS  
Console fails to receive a statusreport from a transmitter for a period of 24 hours, the TROUBLE indicator  
will light.All supervisory conditions can sound a local annunciation and be reported to the central station.  
WALLBOARD AND  
WOOD STUDS  
Installation Instructions  
CONSTRUCTION  
MATERIALS WILL  
EFFECT RADIO RANGE  
The Console’s digital communicator can route calls to three telephone numbers:primary, secondary, and  
CENTRALLY LOCATE CONSOLE  
supervisory. General reporting codes and individual sensor reporting codes are programmable for the  
4x2 format. Alternately, Ademco Contact ID may be selected for the communicator reporting format.  
Powered by a low voltage plug-in transformer, the Console has provisions for a recharagable backup  
battery for operation during AC power outages. A backup battery disconnect switch allows for  
out-of-service storage of the Console without discharge of the battery. The battery is recharged and  
supervised by the Console. If the backup battery becomes low the POWER light will flash and the  
condition can be reported to the central station.  
90% - 100%  
OF FULL POWER  
RIGHT  
CONSOLE LOCATION WILL  
EFFECT RADIO RANGE  
LIGHT CONCRETE  
OR BRICK  
CONCRETE WITH STEEL  
REINFORCEMENT OR  
METAL LATH AND PLASTER  
(760) 438-7000 • FAX (760) 438-7043  
USA & Canada (800) 421-1587 & (800) 392-0123  
Toll Free FAX (800) 468-1340  
65% - 95%  
OF FULL POWER  
10% - 70%  
OF FULL POWER  
TRANSMITTERS AT THE OTHER END OF  
HOUSE MIGHT BE TOO FAR AWAY  
WRONG!  
SYSTEM OVERVIEW  
FRONT PANEL FEATURES  
REMOVING BOTTOM COVER  
TROUBLE INDICATOR  
• NORMALLY OFF  
• LIGHTS WHEN ANY TRANSMITTERS ARE MISSING (SUPERVISORY)  
• BLINKS SLOWLY WHEN ANY TRANSMITTERS HAVE A LOW BATTERY  
EMERGENCY BUTTON  
• PRESS AND HOLD TO TRIGGER  
THE EMEREGNCY ZONE  
EMERGENCY  
FIRE  
TO ACCESS THE INSIDE OF THE CONSOLE  
PRESS THE TWO LOCKING TABS IN AND  
REMOVE THE CONSOLE'S BOTTOM COVER  
POWER INDICATOR  
• LIGHTS WHEN AC IS PRESENT  
• BLINKS SLOWLY WHEN BATTERY IS CHARGING  
• BLINKS QUICKLY WHEN AC IS ABSENT (CONSOLE ON BATTERY POWER)  
• OFF IN TEST AND SETUP MODES  
CLEAR BUTTON  
• STOPS ALARM  
• ADDS CANCEL TO AN ALARM  
REPORT IN PROGRESS  
R
A
D
I
DXT-41  
DXT-42  
DXS-72  
• PRESS IMMEDIATELY AFTER  
EMERGENCY TO PREVENT REPORT  
• CLEARS INDICATORS  
O
• STOPS TROUBLE BEEPER  
• PRESS FOR 5 SECONDS TO ADD  
A TRANSMITTER  
S
I
ACTIVITY  
DXT-61A DXS-21  
DXS-23  
REMOVE  
COVER  
G
N
A
L
S
DXS-62  
DXS-63  
PRESS  
TABS  
IN  
DXS-31/32  
DXS-31  
DXS-54  
HOME BUTTON  
• PRESS TO RESET ACTIVITY TIMER  
• PRESS FOR 5 SECONDS TO TURN ACTIVITY TIMER OFF  
• IF ACTIVITY TIMER IS OFF, PRESS FOR  
5 SECONDS TO TURN ACTIVITY TIMER ON  
HOME INDICATOR  
• LIGHTS WHEN ACTIVITY TIMER IS ON  
• BLINKS SLOWLY WHEN LESS THAN 15 MINUTES IS LEFT ON THE ACTIVITY TIMER  
• BLINKS QUICKLY WHEN THE ACTIVITY TIMER HAS EXPIRED  
HOME BUTTON COVER  
• ADHESIVE BACKED PLATE TO  
HIDE THE HOME BUTTON IF THE  
ACTIVITY TIMER IS NOT USED  
SENDING INDICATOR  
• NORMALLY OFF  
• FLASHES WHEN CONSOLE IS PLACING A CALL  
TO CENTRAL STATION  
VIA TELEPHONE  
CONSOLE  
CONSOLE BOTTOM FEATURES  
OPTIONAL MODEL VB-4 VOICE BOARD INSTALLATION  
BACKUP BATTERY  
PRESS-FIT MICROPHONE INTO  
ROUND MOUNTING HOLE  
CONNECT RED LEAD TO POSITIVE  
AND BLACK LEAD TO NEGATIVE  
BATTERY TERMINAL  
2
1
2
CONNECT BLACK  
MICROPHONE  
WIRE TO CENTER  
TERMINAL  
12-VOLT 1.2 AMP/HOUR  
BACKUP BATTERY  
16 VAC 1.25 AMP  
PLUG-IN  
TRANSFORMER  
ON  
CONNECT RED  
MICROPHONE WIRE TO  
THIS TERMINAL  
OFF  
3
4
BATTERY TYPE: 12-VOLT, 1.2 AMP/HOUR  
TURN BATTERY  
SWITCH OFF  
1
EXTERNAL SPEAKER  
AND RELAY OUTPUT  
TERMINALS  
OPTIONAL  
VB-4 VOICE BOARD  
FIT BATTERY  
INTO CONSOLE  
SEAT  
MICROPHONE  
3
VOICE DIALER JACK  
CAREFULLY ALIGN  
PINS TO CONNECTORS  
ON BOTH ENDS OF BOARD  
LOCAL PHONE SET JACK  
SLIDE DOWN  
BE SURE THAT THE WHITE  
ARROWS ON AUDIO BOARD  
POINT TOWARDS THE  
BATTERY AREA  
TELEPHONE LINE JACK  
5
NOTE: POWER MUST  
BE OFF AND BATTERY  
SHOULD BE REMOVED  
OR DISCONNECTED  
BEFORE INSTALLING  
THE AUDIO BOARD  
THEN BACK  
BATTERY SWITCH  
PRESS BOARD COMPLETELY  
INTO CONNECTORS  
3 AMP 2AG  
BATTERY FUSE  
(HIDDEN)  
TEST BUTTON  
NOTE: AFTER THE AUDIO BOARD  
IS INSTALLED AND ENABLED,  
THE CONSOLE WILL SPEAK INSTEAD  
OF BEEP DURING PROGRAMMING  
OPTIONAL MODEL RSM-1 REMOTE SPEAKER/MIC CONNECTIONS  
OPTIONAL RELAY OUTPUT CONNECTIONS  
INSTALL TRANSFORMER  
FORM C DRY CONTACT RELAY  
24 VOLTS AT 1 AMP MAXIMUM  
VB-4  
VOICE  
BOARD  
NOISEMAKER OR  
VISUAL INDICATOR  
5 - NORMLLY OPEN  
4 - NORMALLY CLOSED  
EXTERNAL  
POWER SUPPLY  
3 - RELAY COMMON  
TURN BATTERY  
SWITCH ON  
1
2
1
ON  
REMOVE  
JUMPER  
WIRE  
VB-4 TERMINAL BLOCK  
PERS-2400 CONSOLE  
OFF  
EXTERNAL MICROPHONE (+)  
5
PERS-2400 CONSOLE  
TERMINAL BLOCK  
MICROPHONE COMMON (-)  
4
CONNECT WIRES  
TO TERMINALS  
CONSOLE MICROPHONE (+)  
3
2 - EXTERNAL SPEAKER  
USE TWISTED  
PAIR WIRE FOR  
MICROPHONE  
SECURE  
TRANSFORMER  
WITH SCREW  
3
1 - EXTERNAL SPEAKER  
2
NOTE: REMOVE  
JUMPER WHEN  
USING AN  
EXTERNAL SPKR  
SPKR  
SPKR  
NOTE: NOT  
ROUTE CABLE UNDER  
STRAIN-RELIEF CLAMP  
TESTED BY UL  
MIC (-)  
MIC (+)  
PLUG TRANSFORMER  
INTO AN UN-SWITCHED  
117 VAC OUTLET  
RSM-1  
TERMINALS  
RSM-1 TERMINAL BLOCK  
LINEAR MODEL RSM-1  
 

Eizo Computer Monitor EV2216W User Manual
Euro Pro Garbage Disposal GC130HS User Manual
Fender Stereo Amplifier 64 Vibroverb User Manual
Fluke CD Player 6000D User Manual
Focal Car Speaker 40 V1 User Manual
Fujitsu Scanner M3096EX GX User Manual
Furuno SONAR FE 400 User Manual
Gianni Industries Door DG 15LD User Manual
Giant Water Pump GP7145GB User Manual
GMC Automobile Envoy XUV User Manual