Garmin GPS Receiver 010 01002 01 User Manual

®
nüvi 2405/2505 series  
owner’s manual  
models: 2405, 2415, 2445, 2455, 2475, 2495, 2515, 2545, 2555, 2565, 2595  
October 2011  
190-01355-00_0B  
 
Printed in Taiwan  
Using Photo Navigation...................................15  
Setting a Simulated Location...........................15  
Saving Locations .............................................16  
Table of Contents  
Getting Started����������������������������������������� 1  
Connecting the Device to Vehicle Power...........1  
About myDashboard..........................................2  
About Sleep Mode.............................................4  
Adjusting the Screen Brightness .......................4  
Adjusting the Volume.........................................4  
About Automatic Volume ...................................5  
Status Bar Icons ................................................5  
Satellite Signals.................................................6  
Using the On-screen Buttons ............................7  
Using the On-screen Keyboard .........................7  
About Shortcuts.................................................8  
Voice Command������������������������������������� 18  
About Voice Commands..................................18  
Navigation ���������������������������������������������� 21  
Starting a Route...............................................21  
Following an Automobile Route.......................22  
About Exit Services .........................................23  
Avoiding Road Features..................................24  
Pedestrian Routes...........................................24  
Map Pages���������������������������������������������� 26  
Customizing the Map.......................................26  
Viewing Turns..................................................27  
Viewing Current Location Information .............30  
Finding Locations������������������������������������ 8  
About Locations.................................................9  
About Search Tools ......................................... 11  
Saving a Home Location .................................14  
Finding Recently Found Places.......................14  
Finding Parking................................................14  
Hands-Free Phone Calls ����������������������� 30  
About Hands-Free Calling ...............................30  
Placing a Call...................................................32  
Using In-Call Options ......................................33  
nüvi 2405/2505 Series Owner’s Manual  
i
 
Saving a Home Phone Number.......................34 Traffic Subscriptions........................................49  
Using the Apps �������������������������������������� 34 Data Management���������������������������������� 50  
Using Help.......................................................34 File Types ........................................................50  
About ecoRoute ..............................................34 About Memory Cards.......................................50  
About Audiobooks............................................38 Transferring Files from Your Computer ...........50  
Planning a Trip.................................................40 Deleting Files ..................................................51  
Viewing Pictures..............................................41  
Viewing Previous Routes and Destinations.....42  
Customizing the Device����������������������� 51  
Map and Vehicle Settings................................52  
Using the World Clock ....................................42  
Navigation Settings..........................................52  
Finding Your Last Parking Spot .......................42  
Display Settings...............................................53  
Converting Units .............................................43  
Bluetooth Settings ...........................................54  
About Offers ....................................................43  
Traffic Settings.................................................55  
Using the Language Guide..............................44  
Units and Time Settings...................................56  
Traffic������������������������������������������������������ 45 Language and Keyboard Settings ...................56  
Disabling Live Traffic .......................................46 Proximity Alerts Settings..................................56  
Traffic Data......................................................46 Device Settings................................................56  
Traffic Receiver ...............................................46 Restoring Settings ...........................................57  
Traffic on Your Route.......................................47  
Traffic in Your Area ..........................................48  
Understanding Traffic Data..............................48  
Appendix ������������������������������������������������ 57  
Power Cables ..................................................57  
ii  
nüvi 2405/2505 Series Owner’s Manual  
 
Caring for Your Device.....................................57  
Erasing User Data ...........................................58  
Changing the Fuse in the Vehicle Power  
Cable ...............................................................59  
Mounting on Your Dashboard..........................60  
Removing the Device, Cradle, and Mount.......60  
Updating Maps ...............................................61  
Purchasing Additional Maps ............................61  
Safety Cameras...............................................61  
Custom Points of Interest ................................62  
Purchasing Accessories ..................................62  
Troubleshooting ..............................................63  
Index ������������������������������������������������������� 65  
nüvi 2405/2505 Series Owner’s Manual  
iii  
 
 
Connecting the Device to Vehicle  
Power  
Getting Started  
WARNING  
WARNING  
See the Important Safety and Product  
Information guide in the product box for product  
warnings and other important information.  
This product contains a lithium-ion battery.  
To prevent the possibility of personal injury or  
product damage caused by battery exposure  
to extreme heat, remove the device from the  
vehicle when exiting or store it out of direct  
sunlight.  
Connect the device to vehicle power  
(page 1).  
1
Mount the device (page 1).  
Register the device (page 3).  
Check for updates.  
2
3
4
Before you use your device on battery power,  
you should charge it.  
Plug the vehicle power cable into the  
USB port on the device .  
1
Software updates (page 3).  
Free map update (page 3).  
Snap the mount onto the suction cup .  
2
3
Press the suction cup to the windshield, and  
flip the lever back toward the windshield.  
Fit the bottom of your device into the mount.  
Tilt your device back until it snaps into place.  
4
5
nüvi 2405/2505 Series Owner’s Manual  
 
1
   
About myDashboard  
Use myDashboard to register your device, check  
for software and map updates, access product  
manuals and support, and more.  
Setting Up myDashboard  
Connect the USB cable to the USB port  
on the device.  
1
Plug the other end of the vehicle power  
cable into a power outlet in your vehicle.  
6
7
If necessary, connect the external antenna  
to the traffic receiver and secure it to the  
windshield using the suction cups.  
Connect the USB cable to the USB port on  
your computer.  
2
Follow the on-screen instructions.  
3
4
2
nüvi 2405/2505 Series Owner’s Manual  
 
     
Registering the Device  
Updating Maps  
Open myDashboard (page 2).  
Open myDashboard (page 2).  
1
2
1
2
3
4
Follow the on-screen instructions.  
Register the device (page 3).  
Under Map Updates, click Update Now.  
Follow the on-screen instructions.  
Updating the Software  
Open myDashboard (page 2).  
1
2
3
Under Software Updates, click Update Now.  
Follow the on-screen instructions.  
Turning Off the Device  
You can power off the device completely.  
Hold the Power key  
for 3 seconds.  
1
nüMaps Guarantee™  
If you register through myDashboard, your  
device could be eligible for one free map update  
within 90 days of first acquiring satellites while  
you drive. Go to www.garmin.com/numaps for  
details and terms and conditions.  
NOTE: If you hold the Power key for less  
than 3 seconds, the device enters sleep  
mode (page 4).  
Select Off.  
2
nüvi 2405/2505 Series Owner’s Manual  
3
 
       
Resetting the Device  
You can reset your device if it stops functioning.  
Adjusting the Screen Brightness  
Select Settings > Display > Brightness.  
1
2
Hold the Power key for 10 seconds.  
Use the slider bar to adjust the brightness.  
About Sleep Mode  
Adjusting the Volume  
Use sleep mode to conserve battery power  
when your device is not in use. Sleep mode  
uses very little power, and a battery charge lasts  
for weeks when your device is in sleep mode.  
Select Volume.  
1
2
Select an option:  
Use the slider bar to adjust the volume.  
Select  
to mute the device.  
Entering Sleep Mode  
Select  
> Audio Mixer and use the  
Press the Power key.  
slider bars to adjust the volume for  
navigation prompts, phone, and media.  
Exiting Sleep Mode  
While the device is in sleep mode, Press the  
power key and double-tap  
.
4
nüvi 2405/2505 Series Owner’s Manual  
 
       
About Automatic Volume  
Status Bar Icons  
NOTE: Automatic volume is not available on all  
The status bar is located at the top of the main  
menu. The status bar icons display information  
about features on the device. You can select  
some icons to change settings or view additional  
information.  
models.  
Your device can increase or decrease the  
volume automatically based on the level of  
background noise.  
GPS signal status.  
Enabling Automatic Volume  
Bluetooth® technology status (appears  
when Bluetooth is enabled). See (page 30)  
Select Volume >  
> Automatic Volume.  
1
2
Select Enabled.  
Transportation mode indicator.  
Current time.  
Battery status.  
nüvi 2405/2505 Series Owner’s Manual  
 
5
 
Transportation Modes  
Satellite Signals  
After the device is turned on, it begins acquiring  
satellite signals. The device may need a clear  
view of the sky to acquire satellite signals. When  
Automobile mode  
Pedestrian mode  
at least one of the  
bars is green, your  
device has acquired satellite signals.  
Routing and navigation are calculated differently  
based on your transportation mode.  
For more information about GPS, go to  
For example, in Automobile mode, the estimated  
time of arrival is calculated using the speed  
limit of the roads on the route. Pedestrian mode  
calculates time of arrival based on walking  
speed.  
Viewing GPS Signal Status  
Hold  
for three seconds.  
NOTE: Pedestrian routes do not include  
highways. If you have cityXplorermaps loaded  
on your device, pedestrian routes may include  
public transit (page 25).  
Choosing a Transportation Mode  
Select  
or  
.
6
nüvi 2405/2505 Series Owner’s Manual  
 
 
Battery Information  
After the device is connected to power, it begins  
to charge.  
Using the On-screen Keyboard  
See “Language and Keyboard Settings” to  
change the keyboard layout (page 56).  
in the status bar indicates the status of the  
internal battery. To increase the accuracy of the  
battery gauge, you should fully discharge the  
battery and then fully charge it. Do not unplug  
the device until it is fully charged.  
Select a character on the keyboard to enter  
a letter or number.  
Select  
Select  
Select  
to add a space.  
to delete an entry.  
to delete a character.  
to select the keyboard language  
Using the On-screen Buttons  
Select  
mode.  
Select  
Hold  
to return to the previous screen.  
to quickly return to the main menu.  
Select  
to enter special characters,  
such as punctuation marks.  
Select to change character  
capitalization.  
Select or  
Hold or  
to see more choices.  
to scroll faster.  
Select  
to see a menu of options for the  
current screen.  
nüvi 2405/2505 Series Owner’s Manual  
 
7
 
About Shortcuts  
Finding Locations  
The device offers many methods for finding  
You can add shortcuts to the Where To? menu.  
A shortcut can point to a location, a category, or  
a search tool.  
locations.  
By category (page 9)  
Adding a Shortcut Icon  
The Where To? menu can contain up to 36  
shortcut icons.  
Near another location (page 10)  
By spelling the name (page 11)  
By address (page 11)  
Select Where To? > Add Shortcut.  
1
2
Using the map (page 13)  
Select an item.  
Using recently found locations (page 14)  
Using coordinates (page 12)  
Using photos (page 15)  
Removing a Shortcut  
Select Where To >  
Shortcut(s).  
> Remove  
1
Using saved locations (page 16)  
Select the shortcut to remove.  
2
3
Select the shortcut again to confirm.  
8
nüvi 2405/2505 Series Owner’s Manual  
 
     
About Locations  
The detailed maps loaded in your device contain  
locations, such as restaurants, hotels, and auto  
services. You can use the Categories function to  
browse for nearby businesses and attractions.  
Enter all or part of the name.  
5
6
Select  
.
Finding a Location by Category  
Finding a Location Using the Search Bar  
Select Where To?.  
1
2
3
4
You can use the search bar to search for  
locations by entering a category, brand name,  
address, or city name.  
Select a category, or select Categories.  
If necessary, select a subcategory.  
Select a location.  
Select Where To?.  
Select the search bar.  
Enter a search term.  
1
2
3
Searching Within a Category  
To narrow your search results, you can search  
within some categories.  
Suggested search terms appear below the  
search bar as you type.  
Select Where To?.  
1
2
3
4
To search for a type of business, enter a  
category name, such as “movie theaters”  
or “coffee shops.”  
Select a category, or select Categories.  
If necessary, select a subcategory.  
Select the search bar .  
nüvi 2405/2505 Series Owner’s Manual  
 
9
     
To search for a business by name, enter  
all or part of the name.  
Changing the Search Area  
By default, your device finds locations closest  
to your current location. You can find a location  
near another city or location.  
To search for an address near you, enter  
the street number and street name.  
Select Where To? > Searching Near.  
To search for an address in another city,  
enter the street number, street name,  
city, and state.  
1
Select an option.  
2
3
If necessary, select a location.  
To search for a city, enter the city and  
state.  
Reporting a Closed or Missing Location  
If your search results include an outdated or  
incorrect location, you can report the error to  
Garmin and remove the location from future  
searches.  
To search for coordinates, enter latitude  
and longitude coordinates.  
Select an option:  
4
To search using a suggested search  
term, select the term.  
Find a location (page 8).  
1
2
3
4
5
Select a location from the list.  
To search using the text you entered,  
Select  
Select  
.
select  
.
> Edit.  
If necessary, select a location.  
5
Select Report as Closed or Report as  
Missing.  
10  
nüvi 2405/2505 Series Owner’s Manual  
 
   
This information is sent to Garmin when you  
connect your device to myGarmin™ using your  
computer.  
The star rating updates on your device.  
About Search Tools  
Search tools allow you to search for cities,  
addresses, intersections, or coordinates. By  
default, the address search tool appears in  
the Where To? menu. To search for cities,  
intersections, and coordinates, you must add  
those search tools to the Where To? menu  
(page 8).  
Editing Location Information  
You can change the address or phone number  
for a location that appears in the search results.  
Find a location (page 8).  
1
2
3
4
5
Select a location from the list.  
Select  
Select  
.
> Edit.  
Finding an Address  
NOTE: The order of the steps may change  
depending on the map data loaded on your  
device.  
Select Address or Phone Number, and  
enter the new information.  
Rating a Point of Interest  
You can assign a star rating to a point of  
interest.  
Select Where To? > Address.  
1
2
Enter information as prompted by the on-  
screen instructions.  
Find a location (page 8).  
1
2
3
If necessary, select Searching Near, and  
enter a different city or postal code.  
3
Select  
>
.
Select the stars to rate the point of interest.  
nüvi 2405/2505 Series Owner’s Manual  
 
11  
   
If necessary, select the address.  
Enter the second street name, and select  
Next.  
4
5
Finding a City  
Before you can find a city, you must add the city  
search tool to the Where To? menu (page 8).  
If necessary, select the street.  
6
7
If necessary, select the intersection.  
Select Where To? > Cities.  
Select Enter Search.  
Enter a city name, and select  
Select a city.  
1
2
3
4
Finding a Location Using Coordinates  
You can find a location using latitude and  
longitude coordinates. This method can be  
helpful when geocaching.  
.
Select Where To? > Categories >  
Coordinates.  
1
Finding an Intersection  
Before you can find an intersection, you must  
add a shortcut to the intersection search tool  
(page 8).  
If necessary, select  
correct coordinate format for the type of map  
you are using, and select Save.  
> Format, select the  
2
Select Where To? > Intersections.  
1
2
Select the latitude coordinate.  
3
4
5
6
7
Select a state or province.  
Enter the new coordinate, and select Done.  
Select the longitude coordinate.  
Enter the new coordinate, and select Done.  
Select View on Map.  
NOTE: If necessary, select State or Country  
to change the country, state, or province.  
Enter the first street name, and select Next.  
3
If necessary, select the street.  
4
12  
nüvi 2405/2505 Series Owner’s Manual  
 
   
Finding a Location by Browsing the Map  
If necessary, select the location description  
to view additional information.  
6
Before you can find places included in the map  
data, such as restaurants, hospitals, and fuel  
stations, you must enable the map layer for  
places along the road (page 26).  
Finding a Location Using Quick Search  
After you have performed a search for a point  
of interest, certain categories may display a  
Quick Search list that displays the last four  
destinations you selected.  
Select View Map.  
1
2
3
Select the screen.  
Select Where To?.  
1
2
3
Drag and zoom the map to display the area  
to search.  
Select a category, or select Categories.  
Location markers appear on the map for  
places along the road.  
If applicable, select a destination from the  
Quick Search list.  
If necessary, select , and select a  
category icon to view only a specific  
category of places.  
4
5
If necessary, select the appropriate  
destination.  
4
Select an option:  
Select a location marker.  
Select a point, such as a street,  
intersection, or address location.  
nüvi 2405/2505 Series Owner’s Manual  
 
13  
 
Saving a Home Location  
You can set your home location for the location  
you return to most often.  
Finding Recently Found Places  
Your device stores the last 50 locations you  
have found.  
Select Where To? >  
Location.  
> Set Home  
Select Where To? > Recent.  
1
1
2
Select a location.  
Select Enter My Address, Use My Current  
Location, or Recently Found.  
2
Clearing the List of Recently Found Places  
Select Where To? > Recent >  
> Yes.  
> Clear  
The location is saved as “Home” in the Saved  
folder (page 16).  
Going Home  
Finding Parking  
Select Where To? > Go Home.  
You can find detailed parking information and  
pricing information.  
Editing Your Home Location Information  
Select Where To? > Categories > Parking.  
Select an option.  
1
2
3
Select Where To? > Saved > Home.  
1
2
3
4
Select  
> Edit.  
Select a parking location.  
Enter your changes.  
Select Done.  
14  
nüvi 2405/2505 Series Owner’s Manual  
 
   
Using Photo Navigation  
You can upload pictures onto your device or  
memory card that include location information  
and create routes to the pictured locations.  
Setting a Simulated Location  
If you are indoors or not receiving satellite  
signals, you can use the GPS to set a simulated  
location.  
Connect your device to your computer (page  
50).  
Select Settings > Navigation.  
Select GPS Simulator.  
Select View Map.  
1
1
2
3
4
2
3
Follow the instructions on the Web site to  
select and load pictures.  
Select an area on the map.  
The address of the location appears at the  
bottom of the screen.  
Disconnect the device from the computer.  
Turn on the device.  
4
5
6
Select the address.  
5
6
From the main menu, select Where To? >  
Saved > Photos.  
Select Set Location.  
A list of pictures with location information  
appears.  
Select a picture.  
7
nüvi 2405/2505 Series Owner’s Manual  
 
15  
   
Saving Your Current Location  
Saving Locations  
From the map, select the vehicle icon.  
You can save locations so you can quickly find  
them and create routes to them.  
1
2
3
4
Select Save.  
Enter a name, and select Done.  
Select OK.  
Saving a Location  
Find a location (page 9).  
1
2
3
4
5
Select a location from the list.  
Starting a Route to a Saved Location  
Select  
Select  
.
Select Where To? > Saved.  
1
2
> Save.  
If necessary, select a category, or select All  
Categories.  
If necessary, enter a name, and select Done.  
Select a location.  
3
4
Select Go!.  
16  
nüvi 2405/2505 Series Owner’s Manual  
 
   
Editing a Saved Location  
Assigning Categories to a Saved  
Location  
You can add custom categories to organize your  
saved locations.  
Select Where To? > Saved.  
If necessary, select a category.  
Select a location.  
1
2
3
4
5
6
NOTE: Categories appear in the saved locations  
menu after you have saved more than 12  
locations.  
Select  
Select  
.
> Edit.  
Select an option:  
Select Where To? > Saved.  
1
2
3
4
5
Select Name.  
Select a location.  
Select Phone Number.  
Select  
Select  
.
To assign categories to the Favorite,  
select Categories.  
> Edit > Categories.  
Enter one or more category names,  
separated by commas.  
To save a photo with the Favorite, select  
Assign Photo (page 41).  
Suggested categories appear below the text  
bar as you type. You can select a suggested  
word to use the suggestion.  
To change the symbol used to mark the  
Favorite on a map, select Change Map  
Symbol.  
Select Done.  
6
Edit the information.  
7
8
Select Done.  
nüvi 2405/2505 Series Owner’s Manual  
 
17  
 
Deleting a Saved Location  
Setting your Wakeup Phrase  
NOTE: Deleted locations cannot be recovered.  
The wakeup phrase is a word or phrase you can  
say to activate Voice Command. The default  
wakeup phrase is Voice Command.  
Select Where To? > Saved.  
1
2
3
Select  
> Delete Saved Places.  
TIP: You can reduce the chance of accidental  
Voice Command activation by using a strong  
wakeup phrase.  
Select the box next to the saved locations to  
delete, and select Delete.  
Select Apps > Voice Command >  
Customize Phrase.  
1
Voice Command  
Enter a new wakeup phrase.  
2
The device indicates the strength of the  
wakeup phrase as you enter the phrase.  
About Voice Commands  
NOTE: Voice Command is not available on all  
Select Done.  
3
models, or for all languages and regions.  
Voice Command allows you to use your device  
by saying words and commands. The Voice  
Command menu provides voice prompts and a  
list of available commands.  
Activating Voice Command  
Say your wakeup phrase.  
The Voice Command menu appears.  
18  
nüvi 2405/2505 Series Owner’s Manual  
 
 
Voice Command Tips  
Speak in a normal voice directed at the  
device.  
Reduce background noise, such as voices  
or the radio, to increase the accuracy of the  
voice recognition.  
Listen for the voice prompt, and speak the  
name of the location.  
3
4
Speak commands as they appear on the  
screen.  
A list of locations appears.  
Respond to voice prompts from the device  
as needed.  
Increase the length of your wakeup phrase  
to reduce the chance of accidental Voice  
Command activation.  
Starting a Route Using Voice Command  
You can say the names of popular, well-known  
locations.  
Say the line number.  
Say your wakeup phrase.  
1
2
Say Find Place.  
nüvi 2405/2505 Series Owner’s Manual  
 
19  
 
Muting Instructions  
You can disable the voice prompts for Voice  
Command without muting the device.  
Select Apps > Voice Command >  
.
1
2
Select Mute Instructions > Enabled.  
Say Navigate.  
5
Disabling Voice Command  
You can disable Voice Command, which  
prevents you from accidentally activating Voice  
Command while speaking.  
Finding an Address  
Say Voice Command.  
1
2
3
Say Find Address.  
Select Apps > Voice Command >  
Select Voice Command > Disabled.  
.
1
2
Speak the entire address.  
20  
nüvi 2405/2505 Series Owner’s Manual  
 
Starting a Route to a Saved Location  
Navigation  
Select Where To? > Saved.  
1
2
If necessary, select a category, or select All  
Categories.  
Starting a Route  
Search for a location (page 8).  
Select a location.  
1
2
3
4
Select a location.  
3
4
Select Go!.  
Select Go!.  
Using Multiple Route Preview  
If necessary, select an option.  
Search for a location.  
1
2
3
Select Drive.  
Select Walk.  
Select a location.  
Select Routes and, if necessary, select  
Drive (page 9).  
Select Public Transit to calculate a route  
that combines public transit and walking.  
NOTE: You must have cityXplorermaps  
loaded to navigate using public transit  
(page 25).  
A map appears with Faster Time, Shorter  
Distance, and Less Fuel routes highlighted.  
Use the on-screen buttons to select a route  
4
5
If necessary, select a route.  
5
Select Go!.  
nüvi 2405/2505 Series Owner’s Manual  
 
21  
   
Using the Automobile Navigation Map  
While navigating in Automobile mode, you can  
select map features.  
Following an Automobile Route  
The route is marked with a magenta line. A  
checkered flag marks your destination.  
Select the map.  
Map icons appear.  
Select an option:  
1
As you travel, the device guides you to the  
destination with voice prompts, arrows on the  
map, and directions at the top of the map. If  
you depart from the original route, the device  
recalculates the route and provides new  
directions.  
2
To view different parts of the map, drag  
the screen.  
To zoom in and out, select  
or  
.
To rotate the map view, select  
.
To switch from North Up to 3D view,  
select  
.
To add or remove map layers, select  
.
To center the map on your current  
location in pedestrian mode, select  
.
22  
nüvi 2405/2505 Series Owner’s Manual  
 
 
Adding a Point to a Route  
Stopping the Route  
Before you can add a stop to a route, you must  
be navigating a route in Automobile mode.  
From the map, select  
>
.
About Exit Services  
While navigating a route, select to return  
to the main menu.  
1
While you navigate a route, you can find gas,  
food, lodging, and restrooms near upcoming  
exits.  
Select Where To?.  
2
3
4
5
Search for the location (page 9).  
Select Go!.  
Services are listed under tabs by category.  
Navigating to an Exit  
Select Add to Active Route.  
From the map, select  
> Exit Services.  
1
2
3
Taking a Detour  
Use  
and  
to select an exit.  
While navigating an automobile route, you can  
use detours to avoid obstacles ahead of you,  
such as construction zones.  
Select  
> Go!.  
Finding Exit Services  
NOTE: If the route you are currently navigating  
is the only reasonable option, your device might  
not calculate a detour.  
From the map, select  
> Exit Services.  
1
2
3
Use  
Select an exit service tab.  
To view nearby gas stations, select  
and  
to select an upcoming exit.  
From the map, select > Detour.  
.
nüvi 2405/2505 Series Owner’s Manual  
23  
 
 
Navigating Off Road  
If you are not following roadways as you  
navigate, you can use Off Road mode.  
To view nearby restaurants, select  
.
To view nearby lodging, select  
To view nearby restrooms, select  
.
.
Select Settings > Navigation.  
1
2
Select a point of interest.  
4
Select Calculation Mode > Off Road >  
Save.  
Avoiding Road Features  
The route will be calculated as a straight line  
to the location.  
Select Settings > Navigation >  
Avoidances.  
1
Select the road features to avoid on your  
routes, and select Save.  
2
Pedestrian Routes  
Following a Pedestrian Route  
In Pedestrian mode, your route is displayed on a  
two-dimensional map.  
Avoiding Transit Types  
NOTE: Transit types are available when  
cityXplorer maps are loaded (page 25).  
If you have cityXplorer maps installed,  
the device calculates a route that uses a  
combination of public transit options, such as  
riding a bus or subway, and walking.  
Select Settings > Navigation > Public  
Transit.  
1
Select the transit type to avoid on your  
routes.  
2
Select Save.  
3
24  
nüvi 2405/2505 Series Owner’s Manual  
 
 
NOTE: cityXplorer maps are not included  
with the device. See http://my.garmin.com to  
purchase cityXplorer maps.  
About Map Icons  
When you are navigating in Pedestrian  
mode, indicates your approximate  
position and your direction of travel on the  
map.  
NOTE: You can change the types of public  
transit and limit the distance spent walking  
during a pedestrian route (page 53).  
The circle around indicates the accuracy  
of your position on the map. A smaller  
circle means the displayed position is more  
accurate.  
Using the Pedestrian Navigation Map  
The yellow icons indicate the navigation  
method used in each section of the route.  
For example, when you see , board a bus  
at that point in the route.  
The black dots on the map are public transit  
stops along your route.  
Select to switch between sections of the  
route.  
Enabling Transit Types  
NOTE: Transit types are available when  
cityXplorer maps are loaded (page 25).  
Select to view the route itinerary.  
Select Settings > Navigation > Public  
Transit.  
1
nüvi 2405/2505 Series Owner’s Manual  
 
25  
 
Select the transit type to include in your  
routes, and select Save.  
Select Settings > Map and Vehicle > Map  
Layers.  
2
1
2
Select the Trip Log check box.  
Map Pages  
Changing the Map Data Field  
From the map, select the data field in the  
lower left-hand corner.  
1
Customizing the Map  
Customizing the Map Layers  
You can customize which data appear on the  
map, such as icons for points of interest and  
road conditions.  
Select a type of data to display.  
2
3
Select Save.  
Changing the Map Perspective  
Select Settings > Map and Vehicle >  
Driving Map View.  
1
From the map, select  
.
1
2
3
Select Map Layers.  
Select an option:  
2
Select which layers you want to include on  
the map, and select Save.  
Select Track Up to display the map in  
two dimensions (2-D), with your direction  
of travel at the top.  
Viewing the Trip Log  
Select North Up to display the map in  
2-D with North at the top.  
Your device keeps a trip log, which is a record of  
the path you have traveled.  
26  
nüvi 2405/2505 Series Owner’s Manual  
 
     
Select 3-D to display the map in three  
dimensions.  
Changing the Map Dashboard  
Changing the Tools on the Map  
Select Settings > Map and Vehicle >  
Dashboards.  
1
Map tools appear as buttons on the map, which  
provide quick access to device functions. For  
example, you can add a button to take a detour,  
adjust the brightness, or view exit services. You  
can select up to three tools to display on the  
map.  
Use the arrows to select a dashboard.  
2
3
Select Save.  
Viewing Turns  
From the main menu, select Settings > Map  
and Vehicle > Map Buttons.  
1
Viewing a List of Turns  
When you are navigating a route, you can view  
all of the turns and maneuvers for your entire  
route and the distance between turns.  
Select an option:  
2
To add a tool, select  
tool.  
, and select a  
Select the text bar on the top of the map.  
1
To remove a tool, select the tool, and  
select Remove.  
To reset to the default tools, select Reset  
to Defaults.  
Select Save.  
3
nüvi 2405/2505 Series Owner’s Manual  
 
27  
 
Select a turn.  
2
The details for the turn appear. If available,  
an image of the junction appears for  
junctions on major roadways.  
Viewing the Entire Route on the Map  
While navigating an automobile route, select  
the navigation bar at the top of the map.  
1
Viewing Junctions  
While navigating an automobile route, you can  
view the junctions on major roadways. When  
you approach a junction in a route, the image of  
that junction appears briefly, if available.  
Select  
> Map.  
2
Viewing the Next Turn  
While navigating an automobile route, a preview  
of the next turn, lane change, or other maneuver  
appears in the upper-left corner of the map.  
The preview includes the distance to the turn or  
maneuver and the lane in which you should be  
traveling, if available.  
From the map, select  
junction, if available.  
to view the  
From the map, select  
turn on the map.  
to view the next  
28  
nüvi 2405/2505 Series Owner’s Manual  
 
 
Resetting Trip Information  
Viewing Traffic Alerts  
While you navigate an automobile route, a traffic  
alert may appear in the navigation bar.  
From the map, select Speed >  
.
1
2
Select an option:  
Select the alert to view more information.  
When not navigating a route, select  
Reset All to reset every data field,  
except the speedometer, on the page.  
Viewing Trip Information  
The trip information page displays your present  
speed and provides statistics about your trip.  
Select Reset Trip Data to reset the  
information on the trip computer.  
TIP: If you make frequent stops, leave the  
device turned on so it can accurately measure  
elapsed time during the trip.  
Select Reset Max� Speed to reset the  
maximum speed.  
Select Reset Trip B to reset the  
odometer.  
From the map, select  
> Trip Computer.  
nüvi 2405/2505 Series Owner’s Manual  
 
29  
 
Viewing Current Location  
Information  
Use the Where Am I? page to view information  
about your current location. This feature is  
helpful if you need to tell emergency personnel  
your location.  
Hands-Free Phone Calls  
About Hands-Free Calling  
Using Bluetooth® wireless technology, your  
device can connect to your mobile phone to  
become a hands-free device. To determine  
whether your mobile phone with Bluetooth  
technology is compatible with your device, go to  
From the map, select  
> Where Am I?.  
Finding Nearby Services  
From the map, select  
> Where Am I?.  
1
2
Your phone may not support all of the hands-  
free phone features your device provides.  
Select Hospitals, Police Stations, or Fuel  
to view the nearest locations in that category.  
Enabling Bluetooth Wireless Technology  
Select Settings > Bluetooth.  
1
2
Select Bluetooth.  
30  
nüvi 2405/2505 Series Owner’s Manual  
 
   
Pairing Your Phone  
Select your phone from the list, and select  
OK.  
6
7
8
Before you can use hands-free calling, you  
must pair your device with a compatible mobile  
phone. Pairing your phone with your device  
allows your phone and device to recognize each  
other and connect quickly.  
If necessary, on your phone, confirm that the  
device is allowed to connect.  
If necessary, enter the device Bluetooth PIN  
(1234) into your phone.  
Place your phone and your device within  
33 ft. (10 m) of each other.  
1
2
3
Disconnecting Your Phone  
Select Settings > Bluetooth.  
1
2
On your device, enable Bluetooth wireless  
technology (page 30).  
Select Phone > None > Save.  
Your phone is disconnected from your device but  
remains paired with your device.  
Select an option:  
Select Add Phone.  
Tips After Pairing the Devices  
If you have already paired a different  
phone, select Phone >  
.
After the initial pairing, the two devices can  
connect automatically each time you turn  
them on.  
On your phone, enable Bluetooth wireless  
technology.  
4
5
When your phone is connected to your  
device, you can make phone calls.  
On your device, select OK.  
A list of nearby Bluetooth devices appears.  
nüvi 2405/2505 Series Owner’s Manual  
 
31  
 
When you turn on the device, it tries to  
connect to the last phone to which it was  
connected.  
Calling a Contact in Your in your Phone  
Book  
Your phone book is loaded from your phone to  
the device each time your phone and the device  
connect. It may take a few minutes for the phone  
book to be available. Some phones do not  
support this feature.  
You might have to set your mobile phone to  
connect to the device automatically when it  
is turned on.  
Receiving a Call  
Select Phone > Phone Book.  
Select a contact.  
1
2
3
When you receive a call, select an option:  
Select Answer.  
Select Call.  
Select Ignore to ignore the call.  
Calling a Point of Interest  
Placing a Call  
Dialing a Number  
Select Phone > Browse Categories.  
Select a point of interest (page 9).  
Select Call.  
1
2
3
Select Phone > Dial.  
1
Enter the number.  
2
3
Select Dial.  
32  
nüvi 2405/2505 Series Owner’s Manual  
 
 
Using the Call History  
Using In-Call Options  
1
2
Your call history is loaded from your phone to  
the device each time your phone and the device  
connect. It may take a few minutes for the call  
history to be available. Some phones do not  
support this feature.  
While on a call, select  
Select an option:  
.
To transfer audio to your phone, select  
Handset.  
TIP: You can use this feature if you want  
to turn off your device and remain on the  
call, or if you need privacy.  
Select Phone > Call History.  
1
2
Select a category.  
A list of calls appears, with the most recent  
calls at the top.  
To display a keypad, select Keypad.  
TIP: You can use this feature to use  
automated systems, such as voice mail.  
Select a call.  
3
To mute the microphone, select Mute.  
To hang up, select End Call.  
nüvi 2405/2505 Series Owner’s Manual  
 
33  
 
Saving a Home Phone Number  
Using the Apps  
TIP: After you save a home number, you can  
edit the home number by editing “Home” in  
Saved (page 16).  
Using Help  
Select Apps > Help to view information  
Select Phone >  
> Set Home Number,  
about using the device.  
enter your phone number, and select Done.  
Searching Help Topics  
Calling Home  
Select Apps > Help >  
.
Before you can call home using the Call Home  
button, you must enter a phone number for your  
home location.  
About ecoRoute  
The ecoRoutefeature calculates the fuel  
economy and the fuel price of navigating to a  
destination, and offers tools for improving fuel  
efficiency.  
Select Phone > Call Home.  
The data provided by the ecoRoute feature is an  
estimate only. The data is not actually read from  
the vehicle, unless you are using the ecoRoute  
HD accessory. To receive more-accurate fuel  
reports for your specific vehicle and driving  
habits, calibrate the fuel economy (page 35).  
34  
nüvi 2405/2505 Series Owner’s Manual  
 
 
ecoRoute HD Accessory  
Select Yes.  
3
When connected to the ecoRoute HD accessory,  
your device can receive real-time vehicle  
information, such as error messages, RPM, and  
battery voltage. Your device includes data read  
from the vehicle by the ecoRoute HD accessory  
when calculating ecoRoute data.  
Calibrating the Fuel Economy  
You can calibrate the fuel economy to receive  
more-accurate fuel reports for your specific  
vehicle and driving habits. You should calibrate  
when you fill up your fuel tank.  
Select Apps > ecoRoute> At the Pump.  
1
compatibility and purchasing information.  
Enter the current fuel price.  
2
3
Enter the amount of fuel the vehicle has  
used since the last time the fuel tank was  
filled.  
Setting up the Vehicle Profile  
The first time you use the ecoRoute features,  
you must enter vehicle information.  
Enter the distance you have travelled since  
the last time the fuel tank was filled.  
4
5
Select Apps > ecoRoute.  
1
Enter fuel and mileage information.  
2
Select Next.  
Changing the Fuel Price  
1
The device calculates the average vehicle  
fuel economy.  
Select Apps > ecoRoute> At the Pump.  
Select Save.  
6
Enter the current price of fuel, and select  
Next.  
2
nüvi 2405/2505 Series Owner’s Manual  
 
35  
   
Acceleration—displays your score for  
smooth and gradual acceleration. You lose  
points for rapid acceleration.  
About the ecoChallenge  
ecoChallenge helps you maximize the vehicle  
fuel economy by scoring your driving habits. The  
higher your ecoChallenge scores, the more fuel  
you have saved. The ecoChallenge collects data  
and calculates a score whenever your device is  
moving and in Automobile mode.  
Braking—displays your score for smooth  
and gradual braking. You lose points for hard  
braking.  
Removing the ecoChallenge Score From the  
Map  
Viewing ecoChallenge Scores  
View your current score in the  
ecoChallenge icon on the map.  
Select  
>
> Settings > Hide > Save.  
Resetting the ecoChallenge Scores  
Select  
to view detailed scores.  
Select Apps > ecoRoute > Vehicle Profile.  
Select Reset.  
1
2
About the ecoChallenge Score  
Current—displays the score for your current  
driving activity.  
Overall—displays an average of the speed,  
acceleration, and braking score.  
Speed—displays your score for driving your  
vehicle at the optimal speed for conserving  
fuel (45–60 mph for most vehicles).  
36  
nüvi 2405/2505 Series Owner’s Manual  
 
 
Viewing Fuel Economy Information  
Viewing a Mileage Report  
You can view your fuel consumption, your total  
fuel cost, and your average fuel economy.  
You can view saved mileage reports on the  
device.  
Select Apps > ecoRoute > Fuel Economy.  
TIP: You can access mileage reports in the  
Reports folder on the device drive or volume  
(page 50).  
1
2
Select a section of the graph to zoom in.  
Mileage Reports  
Select Apps > ecoRoute> Mileage  
Report.  
1
Mileage reports provide the distance, the time,  
the average fuel economy, and the fuel cost of  
navigating to a destination.  
Select a report.  
2
Resetting ecoRoute Information  
A mileage report is created for every route that  
you drive. If you stop a route on the device, a  
mileage report is created for the distance you  
traveled.  
Select Apps > ecoRoute> Vehicle  
1
Profile.  
Select  
> Reset.  
2
nüvi 2405/2505 Series Owner’s Manual  
37  
 
 
Playing an Audiobook  
About Audiobooks  
Select Apps > Audible.  
1
2
3
The device can play audiobooks from Audible.  
com. This feature requires a subscription to  
Audible.com. Go to www.audible.com/garmin to  
activate a free 30-day trial subscription.  
Select Browse.  
Select an option:  
Select Titles.  
Loading Audiobooks onto Your Device  
Select Authors.  
Select Narrators.  
Before you can load audiobooks onto your  
device, you must subscribe to Audible.com.  
Go to www.audible.com/garmin for more  
information.  
Select a book.  
4
5
Select an option to control playback.  
Connect your device to your computer (page  
2).  
1
2
3
To add a bookmark, select  
To pause playback, select  
To resume playback, select  
.
.
On your computer, log in your Audible.com  
account.  
.
To move quickly forward or backward in  
the book, use the slider bar at the top of  
the page.  
Follow the instructions from Audible.com.  
To go to the next chapter, select  
.
To go to the previous chapter, select  
.
38  
nüvi 2405/2505 Series Owner’s Manual  
 
 
Renaming a Bookmark  
To fast forward, hold  
To rewind, hold  
.
By default, the device names a bookmark  
using the time stamp of the bookmark. You can  
rename a bookmark.  
.
Adding a Bookmark  
When you play an audiobook, the player  
automatically resumes the audiobook from  
the point where you last stopped. You can  
add a bookmark to mark a certain spot in the  
audiobook.  
While playing an audiobook, select  
> Rename Bookmarks.  
>
1
Select a bookmark.  
2
3
Enter a name, and select Done.  
While playing an audiobook, select > Add  
Bookmark.  
Deleting a Bookmark  
While playing an audiobook, select  
> Delete Bookmarks.  
>
1
Resuming Playback from a Bookmark  
Select a bookmark.  
2
While playing an audiobook, select  
.
1
2
Select a bookmark.  
nüvi 2405/2505 Series Owner’s Manual  
 
39  
 
Planning a Trip  
You can use the trip planner to create and save  
a trip with multiple destinations.  
Select Apps > Trip Planner.  
1
2
3
4
5
6
7
8
Select  
.
Select Select Start Location.  
Search for a location (page 9).  
Select Select.  
Select an option:  
3
Select to change the arrival or  
departure time.  
Select > Duration to record how long  
To add additional locations, select  
Select Next.  
.
you will stay at a location.  
Select to change the transportation  
mode or route preference for that portion  
of the trip.  
Enter a name, and select Done.  
Editing a Trip Itinerary  
Select Map to view the trip on the map.  
Select Apps > Trip Planner.  
1
2
Select a saved trip.  
40  
nüvi 2405/2505 Series Owner’s Manual  
 
 
Navigating to a Saved Trip  
Viewing Pictures  
Select Apps > Trip Planner.  
1
2
3
4
View pictures that you have stored in the device  
or on a memory card. See (page 50) for more  
information about loading pictures on the device.  
Select a saved trip.  
Select Go!.  
Select Apps > Picture Viewer.  
Use the arrows to scroll through the images.  
Select a picture.  
1
2
3
If prompted, select a route (page 21).  
Editing a Saved Trip  
Select Apps > Trip Planner.  
1
2
3
4
Viewing a Slideshow  
Select a saved trip.  
Select Apps > Picture Viewer.  
1
2
Select  
.
Select  
.
Select an option:  
While a slideshow is playing, you can select  
the screen to stop the slideshow.  
Select Rename Trip.  
Select Edit Destinations to add and  
delete locations, or to change the order  
of locations.  
Setting a Picture as Wallpaper  
Select Apps > Picture Viewer.  
1
2
3
Select Delete Trip.  
Select a picture.  
Select Optimize Order to arrange the  
stops on your trip in the most-efficient  
order.  
Select  
> Set as Wallpaper.  
nüvi 2405/2505 Series Owner’s Manual  
 
41  
   
Use the on-screen buttons to adjust the  
wallpaper.  
4
5
Using the World Clock  
Select Apps > World Clock.  
1
2
Select Save.  
If necessary, select a city, enter a city name,  
and select Done.  
Deleting Pictures  
Select Apps > Picture Viewer.  
1
2
3
Viewing the World Map  
Select a picture.  
Select Apps > World Clock >  
.
Select  
> Delete > Yes.  
Nighttime hours appear in the shaded area  
of the map.  
Viewing Previous Routes and  
Destinations  
Finding Your Last Parking Spot  
When you remove your device from the vehicle  
mount while the device is on, your current  
location is saved as a parking spot.  
Before you can use this feature, you must  
enable the travel history feature (page 57).  
Your can view your previous routes and places  
you have stopped on the map.  
Select Apps > Last Spot.  
Select Apps > Where I’ve Been.  
Using the Calculator  
Select Apps > Calculator.  
42  
nüvi 2405/2505 Series Owner’s Manual  
 
   
If necessary, select a currency button, select  
a different currency, and select Save.  
4
5
Converting Units  
Select Apps > Unit Converter.  
1
2
Select the button at the bottom of the screen  
that displays the currency conversion rate.  
If necessary, select the button next to  
Convert, select a measurement category,  
and select Save.  
Select the box next to a currency.  
Enter a value, and select Done.  
Select OK.  
6
7
8
If necessary, select a unit button, select a  
unit of measurement, and select Save.  
3
4
5
Select the field below the unit you want to  
convert.  
About Offers  
Enter the number, and select Done.  
If your device package includes a traffic receiver,  
you will receive location-relevant offers and  
coupons. Ad-based traffic information is only  
available in North America.  
Setting Currency Conversion Rates  
Manually  
You can update the currency conversion rates  
manually so that you are always using the most-  
current rates.  
NOTE: The traffic receiver must be connected to  
external power and you must be in a coverage  
area to receive ad-based traffic information.  
Select Apps > Unit Converter.  
Select the button next to Convert.  
Select Currency, then select Save.  
1
2
3
See our privacy statement at www  
.garmin.com/privacy/ to view our privacy  
information.  
nüvi 2405/2505 Series Owner’s Manual  
 
43  
 
Viewing Offers  
Using the Language Guide  
Use the Language Guide to look up and  
translate words or phrases.  
CAUTION  
Do not attempt to write down the coupon codes  
while driving.  
Select Apps > Language Guide.  
Select an offer that appears on the screen to  
search for the nearest location related to that  
offer.  
1
Selecting Languages in a Language  
Guide  
You can select the languages you want to  
If available, select  
code.  
to view a coupon  
2
3
translate when translating words and phrases.  
Select Apps > Language Guide > Words  
and Phrases.  
1
Write down this code and present it when  
you arrive at the location.  
Select  
> Language.  
2
3
Viewing an Offer List  
Select From, select the language to  
translate from, and select Save.  
Select Apps > Offers to view a list of the  
offers you have received.  
Select To, select the language to translate  
to, and select Save.  
4
Disabling Traffic and Offers  
To disable offers, you must disable traffic.  
Select Settings > Traffic.  
1
2
Select the Live Traffic check box.  
44  
nüvi 2405/2505 Series Owner’s Manual  
 
   
Translating Words and Phrases  
Traffic  
Select Apps > Language Guide > Words  
and Phrases.  
1
NOTICE  
Garmin is not responsible for the accuracy or  
timeliness of the traffic information.  
Select a category and subcategories.  
2
3
If necessary, select , enter a keyword,  
and select Done.  
Traffic information may not be available in all  
areas or countries.  
Select a word or a phrase.  
4
5
A traffic receiver is included in some packages,  
and is an optional accessory for all models. It is  
built into the vehicle power cable. The powered  
traffic receiver and the device must be in data  
range of a station transmitting traffic data to  
receive traffic information. You do not need to  
activate the subscription included with your  
traffic receiver.  
Select  
to listen to the translation.  
Using the Bilingual Dictionary  
Select Apps > Language Guide > Bilingual  
Dictionaries.  
1
Select a dictionary.  
2
3
If necessary, select , enter a word, and  
select Done.  
For information about traffic receivers and  
coverage areas, go to www.garmin.com/traffic.  
Select a word.  
4
5
Select  
to listen to the translation.  
nüvi 2405/2505 Series Owner’s Manual  
 
45  
 
NOTE: Heated (metallized) windshields could  
degrade the performance of the traffic receiver.  
Disabling Live Traffic  
Select Settings.  
1
2
Clear the Live Traffic check box.  
Traffic Receiver  
The device no longer receives live traffic data,  
but automobile routes still avoid potentially  
congested areas using trafficTrends, if enabled  
(page 55).  
Traffic Data  
When the receiver is within a traffic coverage  
area, your device will begin displaying traffic  
information.  
Mini-USB connector  
External antenna connector  
The traffic receiver and the device may need to  
be in data range of an FM station transmitting  
traffic information.  
Internal antenna  
Power LED  
Vehicle power adapter  
Connect the traffic receiver to an external  
power source.  
1
Connect the traffic receiver to the device.  
2
46  
nüvi 2405/2505 Series Owner’s Manual  
 
 
About the Traffic Icon  
Traffic on Your Route  
When you are receiving traffic information, a  
traffic icon appears on the map. The traffic icon  
changes color to indicate the severity of traffic  
conditions.  
When calculating your route, the device  
examines the current traffic and automatically  
optimizes the route for the shortest time. If a  
severe traffic delay occurs on your route while  
you are navigating, your device automatically  
recalculates the route.  
Color Severity  
Green Low  
Meaning  
Traffic is flowing freely.  
The traffic icon  
changes color to indicate the  
Yellow Medium  
Traffic is moving but there is  
a delay. There is moderate  
traffic congestion.  
severity of traffic conditions on your route or on  
the road you are currently traveling.  
Your device may route you through a traffic  
delay if a better alternative route does not exist.  
The delay time is added into your estimated time  
of arrival automatically.  
Red  
High  
Traffic is not moving or  
moving slowly. There is a  
severe delay.  
Viewing Traffic on Your Route  
While navigating a route, select  
.
1
2
Select Traffic on Route.  
A list of traffic events appears, organized by  
their location on the route.  
nüvi 2405/2505 Series Owner’s Manual  
 
47  
 
Select an event.  
3
Traffic in Your Area  
Manually Avoiding Traffic on Your Route  
Searching for Traffic Delays  
From the map, select  
.
1
2
3
From the map page, select  
Select Traffic Conditions >  
Select an item in the list.  
.
1
2
3
4
Select Traffic On Route.  
.
If necessary, use the arrows to view other  
traffic delays on your route.  
If there is more than one delay, use the  
arrows to view additional delays.  
Select  
> Avoid.  
4
Taking an Alternate Route  
Viewing a Traffic Incident on the Map  
While navigating an automobile route, select  
.
1
From the map, select  
.
1
2
3
Select Traffic Conditions.  
Select Alternate Route.  
2
3
Select a traffic icon.  
Select a route.  
Understanding Traffic Data  
Viewing Traffic on the Map  
The traffic map shows color-coded traffic flow  
and delays on nearby roads.  
The traffic legend explains the icons and colors  
used on the traffic map.  
From the map, select  
.
1
2
From the map, select  
.
1
2
Select Traffic Legend.  
Select Traffic Conditions.  
48  
nüvi 2405/2505 Series Owner’s Manual  
 
 
From the main menu, select Settings >  
Traffic.  
1
2
Traffic Subscriptions  
Subscription Activation  
You do not need to activate the subscription  
included with your FM traffic receiver. The  
subscription activates automatically after your  
device acquires satellite signals while receiving  
traffic signals from the pay service provider.  
Select an option:  
For non-North American units, select  
Subscriptions >  
For North American units, select  
.
.
Write down the FM traffic receiver unit ID.  
3
4
Go to www.garmin.com/fmtraffic to purchase  
a subscription and get a 25-character code.  
Lifetime Subscriptions  
Some models include subscriptions to lifetime  
features.  
The traffic subscription code cannot be  
reused. You must obtain a new code each  
time you renew your service. If you own  
multiple FM traffic receivers, you must obtain  
a new code for each receiver.  
LT—This model includes a lifetime traffic  
subscription and a traffic receiver.  
LMT—This model includes a nüMaps  
Lifetimesubscription, lifetime traffic  
subscription (page 61), and a traffic receiver.  
Select Next on the device.  
Enter the code.  
5
6
7
Adding a Subscription  
You can purchase traffic subscriptions for other  
regions or countries.  
Select Done.  
nüvi 2405/2505 Series Owner’s Manual  
49  
 
 
Garmin mapping software. In addition to map  
and data storage, the memory card can be used  
to store files such as maps, images, geocaches,  
routes, waypoints, and custom POIs.  
Data Management  
You can store files, such as JPEG image files,  
on your device. The device has a memory card  
slot for additional data storage.  
Installing a Memory Card  
The device supports microSD™ and microSDHC  
memory or data cards.  
NOTE: The device is not compatible with  
Windows® 95, 98, Me, Windows NT®, and Mac®  
OS 10.3 and earlier.  
Insert a memory card into the slot on the  
device.  
1
File Types  
The device supports the following file types:  
Press it in until it clicks.  
2
JPEG and JPG image files (page 41)  
Transferring Files from Your  
Computer  
Maps and GPX waypoint files from  
MapSource® (page 61)  
Connect the device to your computer  
(page 2).  
1
GPI custom POI files from Garmin POI  
Loader (page 62)  
Your device and memory card appear  
as removable drives in My Computer in  
Windows and as mounted volumes on Mac  
computers.  
About Memory Cards  
You can purchase memory cards from an  
electronics supplier, or purchase pre-loaded  
50  
nüvi 2405/2505 Series Owner’s Manual  
 
       
NOTE: Some computers with multiple  
network drives cannot display nüvi drives.  
See your operating system help file to learn  
how to map the drives.  
Disconnect the cable from your computer.  
2
Deleting Files  
NOTICE  
On your computer, open the file browser.  
Select the file.  
2
3
4
5
If you do not know the purpose of a file, do not  
delete it. Your device memory contains important  
system files that should not be deleted.  
Select Edit > Copy.  
Open the Garmin or memory card drive or  
volume.  
Open the Garmin drive or volume.  
If necessary, open a folder or volume.  
Select a file.  
1
2
3
4
Select Edit > Paste.  
6
The file appears in the list of files in the  
device memory or on the memory card.  
Press the Delete key on your keyboard.  
Disconnecting the USB Cable  
Customizing the Device  
Complete an action:  
1
Select Settings.  
1
2
3
For Windows computers, double-click the  
eject icon in your system tray.  
For Mac computers, drag the volume  
icon to the Trash  
Select a setting category.  
Select the setting to change it.  
.
nüvi 2405/2505 Series Owner’s Manual  
 
51  
 
Dashboards—sets the map dashboard  
layout.  
Map and Vehicle Settings  
Select Settings > Map and Vehicle.  
myMaps  
Vehicle—changes the icon to represent your  
position on the map. Go to www  
Enabling Maps  
TIP: To purchase additional map products, go to  
.garmingarage.com for more icons.  
Driving Map View—sets the perspective on  
the map.  
Select Settings > Map and Vehicle >  
myMaps.  
1
Pedestrian Map View—sets the perspective  
on the map.  
Select a map.  
2
Map Detail—sets the level of detail on the  
map. More detail may cause the map to  
draw slower.  
Navigation Settings  
Select Settings > Navigation.  
Map Theme—changes the color of the map  
data.  
Calculation Mode—sets route preference.  
Avoidances—sets road features to avoid on  
a route.  
Map Buttons—sets which buttons are  
included on the map. You can include up to  
three buttons on the map.  
Custom Avoidances—allows you to avoid  
specific roads or areas.  
Map Layers—sets the data that appears on  
the map (page 26).  
Advanced Detours—sets the length of a  
detour.  
52  
nüvi 2405/2505 Series Owner’s Manual  
 
   
Limit Walking—controls the maximum  
walking distance included in a pedestrian  
route.  
Shorter Distance—calculates routes that  
are shorter in distance but can take more  
time to drive.  
Public Transit—enables or disables transit  
types.  
Less Fuel—calculates routes that could use  
less fuel than other routes.  
Safe Mode—disables all functions that  
require significant operator attention and  
could become a distraction while driving.  
Off Road—calculates a direct line from your  
location to your destination.  
Display Settings  
GPS Simulator—stops the device from  
receiving a GPS signal, and saves battery  
power.  
Select Settings > Display.  
Orientation—changes to landscape or  
portrait mode.  
Route Preferences  
Select Settings > Navigation > Calculation  
Mode.  
Color Mode—sets a light background (Day),  
a dark background (Night), or automatically  
switches between the two based on the  
sunrise time and the sunset time for your  
current location (Auto).  
The route calculation is based on road speeds  
and vehicle acceleration data for a given route.  
Faster Time—calculates routes that are  
faster to drive but can be longer in distance.  
Brightness—changes the brightness of the  
screen. Decreasing the brightness can save  
battery power.  
nüvi 2405/2505 Series Owner’s Manual  
 
53  
     
Display Timeout—sets the amount of idle  
time before your device enters sleep mode.  
Add Phone or Phone—manages  
connections between your device and mobile  
phones with Bluetooth wireless technology.  
Screenshot—allows you to take a picture of  
the device screen. Screenshots are saved in  
the screenshot folder of the device storage.  
Friendly Name—allows you to enter a  
friendly name that identifies your nüvi on  
devices with Bluetooth technology.  
Capturing Screenshots  
1
Managing the Bluetooth Device List  
You can add, disconnect, or delete phones that  
your device detects while Bluetooth is enabled.  
Select Settings > Display > Screenshot >  
Enabled.  
Select  
to take a screenshot.  
2
Select Settings > Bluetooth > Phone.  
1
2
The picture bitmap file is saved in the  
screenshots folder on the device drive (page  
50).  
Select an option:  
Select a phone for your device to  
connect with.  
Bluetooth Settings  
Select Settings > Bluetooth.  
Select to add a phone to the menu.  
Select  
to delete a phone from the  
Bluetooth—enables the Bluetooth  
component.  
device memory.  
Select None to drop your current  
connection.  
54  
nüvi 2405/2505 Series Owner’s Manual  
 
   
Disabling Bluetooth  
trafficTrends  
Select Settings > Bluetooth.  
When the trafficTrends feature is enabled, your  
device records historic traffic data and uses  
that data to calculate more-efficient routes. This  
information is sent to Garmin when your device  
when you connect your device to myGarmin™  
using your computer.  
1
2
Select Bluetooth.  
Traffic Settings  
Select Settings > Traffic.  
Traffic—enables traffic and offers.  
NOTE: Different routes may be calculated based  
on traffic trends for the day of the week or the  
time of day.  
Subscriptions—lists current traffic  
subscriptions.  
trafficTrends™  
Disabling trafficTrends  
To prevent your device from recording or sharing  
traffic data, you must disable trafficTrends.  
Purchasing Traffic Subscriptions  
You can purchase additional subscriptions or a  
renewal if your subscription expires. Go to  
Select Settings > Traffic > trafficTrends.  
Viewing Traffic Subscriptions  
Select Settings > Traffic > Subscriptions.  
nüvi 2405/2505 Series Owner’s Manual  
55  
 
     
Keyboard Layout—sets the keyboard  
layout.  
Units and Time Settings  
Select Settings > Units and Time.  
Current Time—sets the device time.  
Proximity Alerts Settings  
Units—sets the unit of measure used for  
distances.  
Select Settings > Proximity Alerts.  
Audio—sets the tone of an alert.  
Time Format—allows you to select a  
12-hour, 24-hour, or UTC display time.  
Alerts—alerts you when you approach  
custom safety cameras.  
Language and Keyboard Settings  
Device Settings  
Select Settings > Language.  
Select Settings > Device.  
Voice Language—sets the language for  
voice prompts.  
About—displays the software version  
number, the unit ID number, and information  
about other software features.  
Text Language—sets all on-screen text to  
the selected language.  
EULAs—displays the end-user license  
agreements that apply to your choice.  
NOTE: Changing the text language does not  
change the language of user-entered data or  
map data, such as street names.  
NOTE: You need this information when you  
update the system software or purchase  
additional map data (page 61).  
Keyboard Language—sets the language for  
your keyboard.  
56  
nüvi 2405/2505 Series Owner’s Manual  
 
   
Keep Travel History—allows the device to  
record information for the, Where I’ve Been  
(page 42), and Trip Log (page 26) features.  
Appendix  
Power Cables  
Your device can be powered three ways.  
Clear Travel History  
Vehicle power cable  
USB cable  
Restoring Settings  
You can restore a category of settings or all  
settings to the factory defaults.  
AC adapter (optional accessory)  
Select Settings.  
1
2
3
Caring for Your Device  
If necessary, select a settings category.  
Select  
> Restore.  
NOTICE  
Avoid dropping your device and operating it in  
high-shock and high-vibration environments.  
Do not expose the device to water.  
Contact with water can cause this device to  
malfunction.  
Do not store the device where prolonged  
exposure to extreme temperatures can occur,  
because it can cause permanent damage.  
nüvi 2405/2505 Series Owner’s Manual  
 
57  
   
Never use a hard or sharp object to operate the  
touchscreen, or damage may result.  
Avoiding Theft  
Remove the device and mount from sight  
when not in use.  
Cleaning the Outer Casing  
Remove the residue left on the windshield by  
the suction cup.  
NOTICE  
Avoid chemical cleaners and solvents that can  
damage plastic components.  
Do not keep your unit in the glove  
compartment.  
Clean the outer casing of the device (not the  
touchscreen) using a cloth dampened with a  
mild detergent solution.  
1
Register your device at http://my.garmin  
.com.  
Erasing User Data  
Wipe the device dry.  
2
NOTE: Any items that you have saved are  
Cleaning the Touchscreen  
erased.  
Use a soft, clean, lint-free cloth.  
1
2
Turn the device on.  
1
2
If necessary, use water, isopropyl alcohol, or  
eyeglass lens cleaner.  
Hold your finger on the lower-right corner of  
the device screen.  
Apply the liquid to the cloth.  
3
4
Keep your finger pressed until the  
pop-up window appears.  
3
4
Gently wipe the screen with the cloth.  
Select Yes to clear all user data.  
58  
nüvi 2405/2505 Series Owner’s Manual  
 
 
All original settings are restored.  
Changing the Fuse in the Vehicle  
Power Cable  
Extending the Battery Life  
Keep your device away from extreme  
temperatures.  
NOTICE  
When replacing the fuse, do not lose any of the  
small pieces and make sure they are put back in  
the proper position. The vehicle power cable  
does not work unless it is assembled correctly.  
Put the device in sleep mode (page 4).  
Decrease the screen brightness (page 4).  
Do not leave your device in direct sunlight.  
Decrease the volume (page 4).  
If your device does not charge in your vehicle,  
you may need to replace the fuse located at the  
tip of the vehicle adapter.  
Disable offers and traffic (page 44).  
Disable Bluetooth (page 55).  
Unscrew the end piece .  
1
Shorten the display timeout time (page 54).  
TIP: You may need to use a coin to remove  
the end piece.  
Remove the end piece, the silver tip  
2
3
, and the fuse (glass and silver  
cylinder) .  
Install a 1 A or 2 A fast-blow fuse.  
nüvi 2405/2505 Series Owner’s Manual  
 
59  
   
NOTE: The required fuse for your cable  
is listed after "output" on the back of the  
vehicle power adapter.  
Remove the clear plastic cover from the top  
of the disk.  
4
5
6
Place the suction cup mount on top of the  
disk.  
Place the silver tip in the end piece.  
4
5
Screw the end piece back into the vehicle  
power cable.  
Flip the lever down (toward the disk).  
Removing the Device, Cradle, and  
Mount  
Removing the Device from the Cradle  
Mounting on Your Dashboard  
NOTICE  
The permanent mounting adhesive is extremely  
difficult to remove after it is installed.  
Press up on the tab on the top of the cradle.  
1
2
Tilt the device forward.  
Use the enclosed mounting disk to mount your  
device to the dashboard and comply with certain  
state regulations.  
Removing the Cradle from the Mount  
Turn the cradle to the right or left.  
1
2
Clean and dry the dashboard where you are  
placing the disk.  
1
Apply pressure until the socket on the cradle  
releases the ball on the mount.  
Remove the backing from the adhesive on  
the bottom of the disk.  
2
Place the disk on the dashboard.  
3
60  
nüvi 2405/2505 Series Owner’s Manual  
 
 
Removing the Suction Cup Mount from  
the Windshield  
LM  
This model includes a nüMaps  
Lifetime subscription.  
Flip the lever on the suction cup mount  
toward you.  
1
LMT This model includes a lifetime traffic  
subscription, nüMaps Lifetime  
Pull the tab on the suction cup toward you.  
2
subscription, and a traffic receiver.  
Updating Maps  
Purchasing Additional Maps  
You can update the maps on your device. For  
more information, go to www.garmin.com  
/mapupdates, and select Map Update User  
Guide.  
Go to your device product page on the  
Garmin Web site (www.garmin.com).  
1
Click the Maps tab.  
2
3
Follow the on-screen instructions.  
About nüMaps Lifetime  
Some models include subscriptions to nüMaps  
Lifetime, which provides quarterly map updates  
for the life of your device.  
Safety Cameras  
CAUTION  
lifetime for terms and conditions.  
Garmin is not responsible for the accuracy of,  
or the consequences of using, a custom POI or  
safety camera database.  
nüvi 2405/2505 Series Owner’s Manual  
61  
 
     
Safety camera information is available in some  
locations. Check http://my.garmin.com for  
availability. For these locations, the nüvi includes  
the locations of hundreds of safety cameras.  
Your nüvi alerts you when you are approaching  
a safety camera and can warn you if you are  
driving too fast. The data is updated at least  
weekly, so you always have access to the most  
up-to-date information.  
Installing a POI Loader  
You can create or download custom POI lists  
and install them on your device using POI  
Loader software.  
1
2
3
Click Services > POI Loader.  
Install the POI Loader onto your computer.  
Using the POI Loader Help Files  
For more information on the POI Loader, refer to  
the help file.  
You can purchase a new region or extend an  
existing subscription at any time. Each region  
that you purchase has an expiration date.  
With the POI Loader open, click Help.  
Custom Points of Interest  
Finding Extras  
Custom POIs are customized points on the  
map. They can contain alerts that let you know  
if you are near a designated point or if you are  
traveling faster than a specified speed.  
Select Where To? > Categories > Custom  
POIs.  
1
Select a category.  
2
Purchasing Accessories  
62  
nüvi 2405/2505 Series Owner’s Manual  
 
   
Troubleshooting  
Problem  
Solution  
My device is not acquiring  
satellite signals  
Verify the GPS simulator is turned off (page 52).  
From the main menu, select Settings > System > GPS Simulator.  
Take your device out of parking garages and away from tall buildings and trees.  
Remain stationary for several minutes.  
The suction cup will not  
stay on my windshield.  
Clean the suction cup and windshield with rubbing alcohol.  
Dry with a clean, dry cloth.  
Mount the suction cup (page 1).  
The device does not  
charge in my vehicle.  
Check the fuse in the vehicle power cable (page 59).  
Verify the vehicle is turned on and is supplying power to the power outlet.  
Your device can only charge between 32°F and 113°F (between 0°C and 45°C).  
If the device is placed in direct sunlight or in a hot environment, it cannot charge.  
My battery does not stay To maximize the time between changes, turn down the backlight (page 53).  
charged for very long.  
My battery gauge does not Allow the unit to fully discharge, and fully charge it (without interrupting the charge  
seem accurate.  
cycle).  
How do I know my device When your device is in USB mass storage mode, a picture of a device connected  
is in USB mass storage  
mode?  
to a computer is shown on the device screen. Also, you should see two new  
removable disk drives listed in My Computer.  
nüvi 2405/2505 Series Owner’s Manual  
 
63  
 
The device is connected  
to the computer, but it will  
not go into mass storage  
mode.  
Disconnect the USB cable from your computer.  
Turn off the device.  
Plug the USB cable into a USB port on your computer and into your device.  
The device automatically turns on and goes into USB mass storage mode.  
Verify your device is connected to a USB port and not a USB hub.  
1
2
3
4
I cannot see any new  
If you have several network drives mapped on your computer, Windows can have  
removable drives in my list trouble assigning drive letters to your device drives. Refer to your operating system  
of drives.  
Help file to learn how to map or assign drive letters.  
My phone will not connect  
to the device.  
From the main menu, select Settings > Bluetooth. The Bluetooth field must be  
set to Enabled.  
Turn on your phone and bring it within 33 feet of the device.  
Go to www.garmin.com/bluetooth for more help.  
64  
nüvi 2405/2505 Series Owner’s Manual  
 
currency 43  
units 43  
coordinates 12  
current location, saving 16  
customizing the device 51–58  
custom POIs 62  
B
Index  
battery 63  
Bluetooth technology 30–70  
friendly name 54  
pairing with phone 31  
settings 54  
Symbols  
2-D, 3-D map view 27  
A
brightness 53  
D
accessories 62  
adding a stop 23  
addresses 11  
alerts  
safety camera 62  
audiobook 38  
bookmark 39  
loading 38  
dashboard disk 60  
deleting  
C
calculator 42  
calls  
all user data 58  
character 7  
files 51  
pictures 42  
recent finds list 14  
saved locations 18  
trips 41  
answering 32  
hanging up 33  
home 34  
muting 33  
playing 38  
automatic volume 5  
enabling 5  
caring for your device 57  
category  
detailed maps 50, 52  
detours 23  
display settings 24, 25  
display timeout 54  
driving directions 27  
searching within 9  
charging your device 1, 63  
cityXplorer maps 21, 24  
cleaning your device 58  
computer, connecting 2  
converting  
avoiding  
public transit types 24, 25  
theft 58  
traffic 48  
nüvi 2405/2505 Series Owner’s Manual  
65  
 
finding locations  
E
J
by address 11  
ecoRoute 34–37  
calibrate fuel economy 35  
ecoChallenge score 36  
fuel economy information 37  
mileage report 37  
vehicle profile 34  
editing  
JPEG image files 50  
junction view 28  
by coordinates 12  
recent selections 14  
saved locations 16  
using photos 15  
using search bar 9  
fuse, changing 59  
K
keyboard 7  
language mode 7, 56  
L
change categories 17  
change map symbol 17  
destinations 41  
home location 14  
saved locations 17  
saved trip 41  
G
latitude and longitude 12  
locations 9  
geocaching 12  
go home 14  
GPS  
M
settings 53  
simulator 15  
map buttons 27  
maps  
extras 62  
adding 61  
detail level 52  
errors 10  
purchasing 61  
theme 52  
view 26  
H
F
help 34  
historical traffic 55  
home  
feedback on POI's 10  
files  
deleting 51  
supported types 50  
phone number 34  
setting a location 14  
MapSource 50, 61  
mass storage mode 50  
measurements, converting 43  
66  
nüvi 2405/2505 Series Owner’s Manual  
 
memory card 50  
mileage report 37  
mounting the device  
on dashboard 60  
on windshield 63  
removing from mount 60  
mute  
phone call 33  
myDashboard 2  
myTrends  
public transit  
avoidances 24, 25  
city maps 25  
O
offers 43  
disabling 44  
viewing 44  
R
off-road navigation 24, 53  
on-screen buttons 7  
recalculating routes 23  
recently found locations 14  
registering the device 3  
removing the mount 60  
renaming trips 41  
resetting  
P
pairing a mobile phone 31  
parking 14  
enabling 57  
last spot 42  
saving 42  
home location 14  
the max speed 29  
trip data 29  
N
pedestrian mode  
settings 24, 25  
photo navigation  
loading pictures 15  
picture viewer 41  
PIN  
Bluetooth 31  
points of interest  
finding 9  
navigation 22  
off road 24  
pedestrian 24  
photo 15  
nearby services 30  
next turn 28  
routes  
off road 24, 53  
stopping 23  
S
nüMaps Lifetime 61  
safe mode 53  
satellite signals 6  
Saved Locations 16–17  
saving  
POI loader 50  
protecting your device  
your current location 16  
nüvi 2405/2505 Series Owner’s Manual  
67  
 
school zone database 62  
screen  
transportation mode 6  
trip computer 29  
trip log 26  
voice language 56  
voice mail 33  
volume  
brightness 53  
screenshots 54  
settings 51–70  
software  
enabling 57  
trip planner 40  
troubleshooting 63  
turn-by-turn directions 27  
turn list 27  
adjusting 4  
audio mixer 4  
automatic 5  
version 56  
W
speech recognition 18  
storing the device 57  
system settings 52  
Where Am I? 30  
Where I've Been  
enabling 57  
Where To? menu 8  
customization  
shortcut icon, adding 8  
shortcut icon, removing 8  
world clock 42  
U
unit converter 43  
unit ID 56  
updating  
maps 3  
software 3  
USB 63  
T
text language 56  
time settings 56  
Track Up 26  
traffic 45–70  
user data, deleting 58  
activating a subscription 49  
adding traffic subscriptions 55  
icons 46  
incidents 47  
receiver 46  
V
voice command  
activating 18  
navigating with 19  
tips for using 19  
wakeup phrase 18  
trafficTrends 55  
traffic alerts 29  
68  
nüvi 2405/2505 Series Owner’s Manual  
 
 
913-397-8200  
1-800-800-1020  
0808 2380000  
1-866-429-9296  
+44 (0) 870.8501241  
43 (0) 3133 3181 0  
00 33 1 5517 81 89  
815 69 555  
00 32 2672 5254  
00 45 4810 5050  
00 358 19 311 001  
0800-0233937  
0180 5 / 42 76 46 - 880  
0180 5 / 42 76 46 - 550  
00800 4412 454  
00 39 02 3669 9699  
00 35 1214 447 460  
00 902 00 70 97  
00 46 7744 52020  
+44 2380 662 915  
Garmin International, Inc�  
1200 East 151st Street,  
Olathe, Kansas 66062, USA  
Garmin®, the Garmin logo, MapSource®, and nüvi® are trademarks of Garmin  
Ltd. or its subsidiaries, registered in the USA and other countries. cityXplorer,  
ecoRoute, myGarmin, nüMaps Guarantee, nüMaps Lifetime, nüvi®  
and trafficTrendsare trademarks of Garmin Ltd. or its subsidiaries. These  
trademarks may not be used without the express permission of Garmin.  
Garmin (Europe) Ltd�  
Liberty House, Hounsdown Business Park  
Southampton, Hampshire, SO40 9LR UK  
The Bluetooth® word mark and logos are owned by the Bluetooth SIG,  
Inc., and any use of such name by Garmin is under license. Windows® is  
a registered trademarks of Microsoft Corporation in the United States and/  
or other countries. Mac® is a registered trademark of Apple Computer, Inc.  
microSDis a trademark of SD-3C, LLC. Audible.com® and AudibleReady® are  
registered trademarks of Audible, Inc. © 1997–2005 Audible.  
Garmin Corporation  
No. 68, Zhangshu 2nd Road, Xizhi Dist.  
New Taipei City, 221, Taiwan (R.O.C.)  
© 2011 Garmin Ltd. or its subsidiaries  
 
 

Dynex TV Mount DX TVMLPTB03 User Manual
Fisher Price Baby Furniture G2808 User Manual
FMI Indoor Fireplace FBPS User Manual
Fostex Computer Drive MR 8HD CD User Manual
Fujitsu Server RX330 User Manual
Gateway Server GR160 F1 User Manual
GE Flat Panel Television J2B918BEK User Manual
GE Monogram Beverage Dispenser ZDWI240 User Manual
GE Noise Reduction Machine GFK 0787B User Manual
Gigabyte Computer Hardware GA EP45 UD3P User Manual