Ei Electronics Smoke Alarm Ei144 User Manual

MAINS POWERED 230V~  
9V Alkaline Battery Back-Up  
Model Ei144 Heat  
Easi-Fit base  
9V Alkaline Battery back up  
Fixed temperature fast response thermistor type  
sensor, range 54°C to 62°C  
Test/Hush button  
Advanced suppression and calibration technology  
Interconnectable to other Ei mains powered alarms  
Low power cell warning  
Kitemarked to BS5446-2:2003  
5 year guarantee  
Product Description  
Operation  
The Ei144 is a Heat Alarm that runs on 230V AC mains  
power, and has a 9V alkaline battery back up in the  
event of mains failure. The 9V battery will last for up to 4  
years in standby mode, and capable of powering the  
heat detector for up to 2 years in the event of mains  
failure.  
The green indicator will illuminate to show mains  
power is present  
The red indicator will flash every 40 seconds to  
show that the detector has performed an automatic  
self test  
The Ei144 is supplied with the Easi-Fit base that allows  
very quick and simple installation of the heat alarm. The  
Easi-Fit base automatically connects both mains power  
and battery as the detector head slides on to the Easi-Fit  
base.  
The red indicator will flash rapidly to show an alarm  
condition for the heat detector  
The “Test/Hush” button will either silence false  
alarms or perform a unit self test  
The Ei144 has the ability to interconnect up to twelve  
alarms to allow all alarms to sound if just one of the  
interconnected alarms should be triggered.  
In “Test” mode the alarm will perform a self test and  
sound the horn  
In “Hush” mode the alarm enters a ten minute period  
of reduced sensitivity to overcome false alarm  
conditions, and will then automatically reset itself  
The Ei144 has built in circuitry to aid suppression of  
voltage transients and RF interference to further reduce  
the chances of false alarms under such conditions.  
When interconnected to other Ei mains powered  
alarms, an alarm on one detector will trigger all other  
interconnected alarms within one second (only the  
triggered alarm will flash a red indicator)  
The Ei144 heat alarm gives a fire warning when the  
temperature at the unit reaches 580C. Heat alarms are  
ideal for use in kitchens and garages, where the use of  
optical or ionisation alarms would lead to unwanted  
nuisance alarms.  
The heat detector will emit a beep every 40 seconds  
to indicate that the battery back up is depleted and  
needs replacing  
On escape routes this alarm must be interconnected  
with smoke alarms.  
Shannon Free Zone, Shannon, Co. Clare, Ireland.  
Ph.+353 61 471277 Fx.+353 61 471053  
E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice.  
Ei144 DataSht RevA  
 

Echo Chainsaw CS 440EVL User Manual
Faber Ventilation Hood 630006506 User Manual
Fisher Price Telescope G2579 User Manual
Freecom Technologies Portable Multimedia Player Multimedia Player User Manual
Fujitsu PDAs Smartphones P2WW 2622 01ENZ0 User Manual
Fundex Games Games 2475 User Manual
Gefen Network Router EXT HD DSWF User Manual
GE Microwave Oven 164D2966P127 I User Manual
GE Microwave Oven JES1144WY User Manual
Gianni Industries Door DG 11S User Manual