Creek Audio CD Player Destiny User Manual

DESTINY  
RDS FM/AM TUNER  
DESIGNED AND ENGINEERED  
IN THE UNITED KINGDOM  
OPERATING INSTRUCTIONS  
Thank you for purchasing the Creek Destiny tuner. You are now in possession of a State of the Art RDS  
AM/FM tuner. The Destiny is the matching tuner for the Destiny Integrated Amplifier and CD Player,  
although itwillalsoworkvery wellwithanyothermanufacturersamplifiers.  
The functions and operation of the Destiny tuner are deceptively simple for the many features that it offers,  
allof whichcanberemotelycontrolled.  
SAFETYREQUIREMENTS  
Read all the instructions before connecting or operating the unit. Keep this manual so you can refer to these  
safety instructions.  
WATER&MOISTURE  
To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. If the unit is exposed  
to moisture, immediately disconnect the power cord from the wall. Take the unit to an authorised service  
centreforinspection. Do not touch theunit, powercord, orplugwithwethands.  
VENTILATION  
You must allow 5 cm (2 inches) of unobstructed clearance around the unit. Do not place the unit on a bed,  
sofa, rug, orsimilarsurfacethatcouldblockventilation from thebottom.  
HEAT  
Keep the unit away from naked flames, radiators, stoves, or any other heat-producing appliances (including  
amplifiers).  
RACK &STANDS  
Placethe unit on a fixed, levelsurfacestrong enough to support its weight, such as the CreekAudio Rack. Do  
not placeiton amoveabledevicethatcouldtipover.  
CLEANING  
Unplug the unit from the mains supply before cleaning. The caseshould normally require only a wipe with a  
soft lint-freecloth.  
POWER SOURCES  
Only connect the unit to a power supply of the type and voltage described in the operating instructions or  
specifiedon therearpanelof theunit.  
POWER CORDPROTECTION  
Connect the unit to the power outlet only with the cord supplied. Do not modify the supplied cable in any  
way. Do not attempt to defeat grounding and/or polarisation provisions. Do not use extension cords. Do  
not route the power cord where it will be crushed, pinched, bent at severe angles, exposed to heat, or  
damagedinanyway.  
NON-USEPERIODS  
If the unit is to be left unused for a long period of time, the power cord should be unplugged from the wall  
outlet.  
 
DESTINY RDS FM/AM TUNER OPERATING INSTRUCTIONS  
BAND  
Press to toggle through FM auto/stereo, FM mono, and AM bands. FM auto/stereo is shown by the appearance Auto  
and Stereo at the top of the display. Auto will disappear and Mono will change to Stereo when a station is tuned in  
stereoand thesignalstrength isgreat enough to support it, noisefree.  
REARPANEL- CONNECTING TO OTHEREQUIPMENT  
INTERCONNECT CABLES  
To connect the tuner to an amplifier an interconnect cable is required. Any cable of reasonable quality terminated  
withRCAplugswillbesuitable. Pleaseconsultyour dealerifyou areunsure.  
AUDIO OUTPUT  
These outputs are located on the back of the Destiny Tuner and are labelled ANALOGUE OUTPUT. Connect these  
outputs to the amplifier's tuner input. Match the Red interconnect lead to the R-ANALOGUE OUTPUT and the White  
interconnectleadto theL-ANALOGUEOUTPUT.  
ANTENNA  
One FM and one AM antenna are supplied. Connect the AM (two wire loop) antenna to the AM antenna clips on the  
rear panel. Connect the FM antenna (single piece of wire) to the FM 75 Ohm connection on the rear panel. To obtain  
the best FM or AM signal use a high quality directional external antenna. If in doubt consult your supplying dealer for  
advice.  
MAINSCONNECTION  
Check that the MAINS POWER switch on the back of the unit is in the off position. 1 = on 0 = off. Push the plug (IEC  
line socket) of the power cable supplied with the Destiny Tuner into the socket (MAINS IN) on the rear of the unit.  
Make sure it is pressed in firmly. Plug the other end of the power cable into an AC wall outlet. Switch the MAINS  
POWERswitch to on 1.  
USINGTHEREMOTECONTROL  
Note: Install the two AAA batteries supplied with the remote control. The SRC2 handset is a system remote control  
and therefore not all buttons control the Destiny Tuner. Some buttons have multiple uses. (Refer to the Destiny CD  
manual for CD player button descriptions). Do not place anything in front of the display area of the unit, or the  
remotecontrolmaynot work.  
The green coloured buttons allow you to clearly find the features for your Destiny tuner - blue buttons operate the  
Destiny CD player, ivory buttons operate the amplifier. The dark grey buttons are multi purpose. For example, to use  
any of those with your tuner, first press the TUNER product button located above the circle of buttons in the middle of  
thehandset. The remotewillthen beprogrammedto ensurethedarkgreybuttons workforthatdeviceonly.  
If you wish your tuner to go to a particular pre-set station, first press the Green Tuner button followed by the stored  
pre-setnumber. To choose asubsequent pre-setitisnot necessary to presstuneragain.  
When in tuner mode, the UP and DOWN buttons refer to pre-set stations, SCAN FORWARD and BACK will scan  
through stations.  
Waking up from STANDBY requires a button to be pressed for each product - e.g. to wake up the tuner, press any of  
thegreentunerbuttons.  
Page Three  
 
DESTINY RDS FM/AM TUNER OPERATING INSTRUCTIONS  
TECHNICAL SPECIFICATIONS  
FM  
Frequency range 87.5 - 108.0 MHz  
Frequency response 15Hz to 12kHz +/- 1dB  
Usable sensitivity at 30dB S/N = 30dB 90MHz FM = 9dBu  
Selectivity (IHF) 30dB  
Signal to noise ratio @90MHz, 60dBu and 75kHz mod = 56db  
Distortion (mono) 40 kHz mod = 1%  
Stereo separation @ 1kHz 40dB mod = 39dB  
Output level @ 75kHz mod = 1.2 V RMS  
Number of pre-sets = 80 for AM and FM  
AM  
Frequency range 520 - 1720 USA 531 - 1620 Rest of World  
Usable sensitivity at 20dB S/N and 30dB mod = 36dB  
S/N ratio at 30dB mod = 36dB  
Distortion @ 30dB mod = 1.2%  
Output level 1.0V RMS  
Number of pre-sets = 80 for AM and FM  
Power dissipation 230/115V = 15 Watts maximum  
Size W x H x D 430 x 75 x 330 mm (17” x 3” x 13”)  
Weight = 5 kgs (11 lbs)  
Supplied Accessories:  
Mains lead, Remote Control with 2 AAA batteries, FM Antenna (piece of wire) AM 2 wire loop antenna  
USA  
This product complies with FCC requirements  
CE  
CCC  
C Tick  
Europe  
China  
Australia  
Creek Audio Ltd reserves the right to change or modify the specification of its products without prior warning.  
If within two years of purchase date your Creek DESTINY tuner proves to be defective for any reason other than  
accident, misuse, neglect, unauthorized modification, or fair wear and tear, Creek Audio Ltd. will, at its discretion,  
replace the faulty parts without charge for labour or return carriage within the United Kingdom. This warranty is  
valid only in the United Kingdom and given in addition to statutory rights. Service enquiries outside the United  
Kingdom should be addressed first to the supplying dealer and/or the Creek distributor/importer. Warranties  
granted in these countries are entirely at the discretion of the distributor.  
CREEK AUDIO LTD  
12 Avebury Court, Mark Road, Hemel Hempstead HP2 7TA United Kingdom  
Telephone: +44 (0)1442 260146 Fax: +44 (0)870 6220846  
E & O E  
 

Cooper Lighting Indoor Furnishings 23ADIW User Manual
Cooper Lighting Landscape Lighting MPB50SR255 User Manual
Craftsman Lawn Mower 291376500 User Manual
Desa Portable Generator PGH7500IE PGH1100IE User Manual
Desa Portable Generator RGH3000 User Manual
Edelbrock Automobile Parts 8824 User Manual
Frigidaire Ventilation Hood PL30WC51EC User Manual
FUNAI Flat Panel Television MJ414FG User Manual
Fundex Games Board Games On the Bubble User Manual
GE Dehumidifier AHG20 User Manual