I N S T A L L A T I O N I N S T R U C T I O N S
Instrucciones de instalación
Installationsanleitung
Istruzioni di installazione
Installatie-instructies
Instruções de Instalação
Instructions d´installation
16"/24" Adjustable On-Center Ceiling Plate
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
CMS390/CMS391
Installation Instructions
CMS390/CMS391
DIMENSIONS...cont’d
325.747
12.825
1.1/2" - 11.5 NPT TREADS
66.675
2.625
95.250
3.750
220.663
41.275
2X 1.625
2X 8.688
ADJUSTABLE BOTH DIREC TIONS
22.225
2X .875
14.597
.575
9.906
.390
190.500
4X
7.500
406.400
16.000
574.675
22.625
12.700
4X .500
10 - 24 UNC THREAD
609.600
24.000
81.332
3.202
9.906
.390
49.181
1.936
79.742
2X 3.139
CMS-391
651.495
25.649
LEGEND
Security Wrench
Tighten Fastener
Apretar elemento de fijación
Befestigungsteil festziehen
Apertar fixador
Llave de seguridad
Sicherheitsschlüssel
Chave de segurança
Chiave di sicurezza
Veiligheidssleutel
Clé de sécurité
Serrare il fissaggio
Bevestiging vastdraaien
Serrez les fixations
By Hand
Loosen Fastener
Aflojar elemento de fijación
Befestigungsteil lösen
Desapertar fixador
A mano
Von Hand
Com a mão
A mano
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
Met de hand
À la main
Open-Ended Wrench
Llave de boca
Phillips Screwdriver
Destornillador Phillips
Gabelschlüssel
Chave de bocas
Chiave a punte aperte
Steeksleutel
Kreuzschlitzschraubendreher
Chave de fendas Phillips
Cacciavite a stella
Kruiskopschroevendraaier
Tournevis à pointe cruciforme
Clé à fourche
3
Installation Instructions
CMS390/CMS391
TOOLS REQUIRED FOR INSTALLATION
#2
5/32"
Security
(Included)
1/4" (12.7mm)
1/8"
PARTS
A (1)
(CMA-391
shown)
B (2)
1/4-20 x 3-1/2"
C (2)
1/4"
E (1)
10-24 x 1/4"
D (1)
F (2)
5/16-18 x 5/8"
G(1)
10-24 x 1/4"
H (1)
5/32"
Security
4
Installation Instructions
CMS390/CMS391
INSTALLATION
NOTE: The CMS-390 and CMS-391 attach to a 1-1/2" NPT
threaded column in a finished ceiling with 16" on-center
(CMS-390) or 24" on-center (CMS-391) wood joists. In
addition, both the CMS-390 and CMS-391 can be
installed in line on a single joist.
(G
(G) x 1(F
6
1. Remove end caps from ceiling plate (A). (See Figure 1)
(A)
Figure 3
End caps
Security
1. For increased security, remove two set screws from ceiling
plate and replace with two 5/16-18 x 5/8" security set
screws (F). Tighten with 5/32" security hex wrench (H).
(See Figure 4)
Figure 1
2. Drill two 1/8" pilot holes into wood joists.
3. Install ceiling plate (A) to ceiling using two 1/4-20 x 3-1/2"
lag bolts (B) and two 1/4" flat washers (C). (See Figure 2)
(F) x 2(F
1
4. Re-install end caps onto ceiling plate (A). (See Figure 2)
(E) x 1
2
(A)
(A)
4
Adjustment
Set Screws
(D) x 1
4
(C) x 2
Figure 4
2. For additional security, remove Phillips screw in threaded
collar of ceiling plate and replace with one 10-24 x 1/4"
button head security cap screw (E) through security spinner
(D). Tighten with 5/32" security hex wrench (H).
(See Figure 4)
((B) x 2
3
Adjustment
Figure 2
To adjust position of ceiling plate, loosen adjustment set
screws, adjust plate to position, and tighten screws. (See
Figure 4)
5. Install 1-1/2" NPT threaded column (not included) into
threaded collar on ceiling plate (A).
6. Install one 10-24 x 1/4" Phillips head screw (G) into
threaded collar and tighten. (See Figure 3)
5
CMS390/CMS391
Installation Instructions
USA/International
Europe
A
P
F
A
P
F
8401 Eagle Creek Parkway, Savage, MN 55378
800.582.6480 / 952.894.6280
877.894.6918 / 952.894.6918
Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands
+31 (0)40 2668620
+31 (0)40 2668615
Asia Pacific
A
Room 24F, Block D, Lily YinDu International Building
LuoGang, BuJi Town, Shenzhen, CHINA.
8803-000092
¤2008 Chief Manufacturing
02/08
P
F
+86-755-8996 9226
+86-755-8996 9217
|