Atlona Cable Box AT DVI4 100SR User Manual

DVI with RS232 with Bi-Directional IR Extenders  
over CAT5/6/7 up to 330ft  
AT-DVI4-100SR  
User Manual  
Toll free: 1-877-536-3976  
Local: 1-408-962-0515  
 
INTRODUCTION  
The Atlona AT-DVI4-100SR is a DVI with RS232 and Bi-Directional IR Extender Kit over Cat5/6/7. The Atlona DVI Extend-  
ers are capable of extending extremely high resolutions up to 2K (2048x1080p) or most known 1920x1200 and 1080p  
up to 330ft without signal degradation.  
The DVI4-100SR is capable of transmitting Ethernet channel from one location to another, perfect for digital signage  
applications.  
FEATURES  
• Transmits DVI (Digital Only), RS232 and Bi-Directional IR up to 330ft (100m)  
• Supports Full Uncompressed HD Video  
• Supports high resolution video HD: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p (24/30/50/60Hz), 2k (2048x1080p)  
• Supports high resolution Video VESA: 640x480, 800x600, 1024x768, 1280x800, 1280x768, 1280x1024, 1680x1050,  
1600x1200, 1920x1080, 1920x1200 and 2048x1080p  
• Fully EDID Compliant  
• Fully HDCP Compliant  
• Supports all VESA formats which is perfect when used with specialized projectors or commercial LCD panels.  
• Enables 10.2Gbps of HDMI (including HDCP) over 330ft Cat5/6/7 cable.  
• Supports Refresh Rates: 24Hz, 30Hz, 50, 60Hz  
• Supports Bi-directional IR transmission, perfect for Control4, RTI, HAI users as this ability allows sending IR to the re-  
mote locations from the control systems and from the remote locations to the control systems.  
• Supports RS232 pass-though, perfect for integrating a 3rd party control system.  
• Supports transmission distances up to 330ft @ at full resolution  
• Wall Mountable, mounting ears are included.  
• Locking Power Supplies  
• Easy to install, simple to operate and the most effective solution for long signal extension.  
• Ideal for video broadcasting, remote monitoring, presentations and educational facilities.  
PACKAGE CONTENT  
• 1 x AT-DVI4-100S (transmitter module)  
• 1 x AT-DVI4-100R (receiving module)  
• 2 x 5v Power supplies (Universal 110/240V)  
• 1 x Set of Wall Mounting Ears  
• 2 x IR Emitter sensor  
• 2 x IR Receiver sensor  
• 1 x Instructions manual  
Toll free: 1-877-536-3976  
Local: 1-408-962-0515  
2
 
SPECIFICATIONS  
Transmitter Inputs  
DVI (24+1), IR (1/8-inch), RS232 (DB9), Ethernet (RJ45)  
Link to Receiver (RJ45), Ethernet (RJ45)  
Transmitter Outputs  
Receiver Inputs  
Link to Transmitter (RJ45), Ethernet (RJ45)  
DVI (24+1), IR (1/8-inch), RS232 (DB9), Ethernet (RJ45)  
Yes  
Receiver Outputs  
HDCP/EDID Compliant  
Supports high resolution video HD  
480i, 576i, 480p, 576p, 720p, 1080i, 1080p (24/30/50/60Hz), 2k(2048x1080p)  
Supports high resolution video VESA 640x480, 800x600, 1024x768, 1280x800, 1280x768, 1280x1024,  
1680x1050, 1600x1200, 1920x1080, 1920x1200 and 2048x1080p  
Distance at the highest resolution  
and full color depth  
330ft  
Deep Color  
48bit up to 330ft (100m)  
Power Consumption (max.)  
Video Bandwidth  
Input TMDS signal  
Input DDS signal  
2.5W (transmitter) and 5.5W (receiver)  
up to 10Gbps  
1.2 volts (peak-to-peak)  
5 volts (peak-to-peak)  
DVI Connector  
24+1 pin female (Digital Signal Only)  
5V/4A (110/240 universal) – Locking Type  
5.98×4.13×1.22 (Lx W x H)  
2.1 (transmitter + receiver)  
-5 to +35°C (-41 to +95 °F)  
5 to 90 % RH (no condensation)  
Power Supply  
Dimensions (inch)  
Weight (lb)  
Operating Temperature Range  
Operating Humidity Range  
PANEL DESCRIPTIONS  
1. Transmitting Module  
1.1. Front Panel  
1. DVI Input  
2. Ethernet Connector  
3. IR RX  
4. IR TX  
1
2
3
4
Toll free: 1-877-536-3976  
Local: 1-408-962-0515  
3
 
1.2. Rear Panel  
1. RS-232 Port  
2. LINK  
3. RJ-45 Output  
4. Power on Light  
5. Power input, 5V DC  
1
2
3
4
5
2. Receiving Module  
2.1. Front Panel  
1. DVI Output  
2. Ethernet Connector  
3. IR RX  
4. IR TX  
1
2
3
4
2.2. Rear Panel  
1. RS-232 Port  
2. LINK  
3. RJ-45 Input  
4. Power on Light  
5. Power input, 5V DC  
1
2
3
4
5
CONNECTION AND OPERATION  
1. Connect the DVI Source e.g., Computer, Video Codec, switch to the AT-DVI4-100SR (transmitting unit)  
2. Connect the DVI Display e.g., Projector, LCD/LED or a switch to the AT-DVI4-100R (receiving unit)  
3. Terminate the CAT5, 6 or 7 wire with 568B termination and use a tester to make sure all pins are wired correctly  
before connect it to the DVI-100SR modules.  
4. Connect the power supplies to both transmitter and receiver and the video and in a few seconds the video should  
appear on the display.  
5. For users who want to transmit IR signal from the Display to the source, should connect the IR RX to the receiver unit  
and IR TX to the transmitter.  
6. For users who want to transmit IR signal from the Source to the Display, should connect IR RX to the transmitter and  
IR TX to the receiver module.  
Note: It is very important to connect IR RX and IR TX to its proper connections. If the IR TX is connected to the IR RX connection or  
other way around, the IR sensors will get damaged.  
7. For users who want to transmit RS232 signal from the control system or computer to the display device, should con-  
nect the RS232 (DB9) cables to the transmitter and receiver modules respectively.  
8. RS232 Port on the transmitter and Receiver can also be used for firmware upgrades to the DVI4-100SR modules.  
Toll free: 1-877-536-3976  
Local: 1-408-962-0515  
4
 
CONNECTION DIAGRAM  
CAT5/6/7  
cable  
up to 330ft  
RS232  
cable  
DVI  
cable  
IR Bug  
DVI c
IR Emitter  
RS232  
cable  
OR  
IR Remote  
The AT-HD4-V110SR allows to extend video with audio with Bi-Directional RS232 and Bi-Directional IR.  
Therefore the IR and or RS232 signal could be send from the remote location to main hub or from control system to  
the remote location.  
TROUBLESHOOTING  
1. No Video Signal on the Display or Signal is going in and Out:  
a. Please test your RJ45 cables with a Fluke or similar tester to make sure that all the wires are connected and the distance  
is within the limits.  
b. If you are using patch panel or and RJ45 wall plates, the distance will be reduced, please do a direct connection by  
passing all additional equipment.  
c. Please try to re-terminate your CAT5/6/7 wire to 568B  
d. If your sources is a computer (laptop or desktop), please enable the DVI output.  
Windows computers: Select Properties  
Display Select Extended Display check box Select most appropriate resolution (most basic would be 1024x768)  
Mac Computers: Select Settings Select Displays Select Detect Display Select Arrangement Select Mirror  
Select Display resolutions  
Select Detect Display  
Select second  
Displays Select most appropriate resolution (most basic would be 1024x768)  
2. IR Signal is not passing through:  
Make sure you have IR RX and IR TX connected to its respective interfaces. If not, you may have burned the IR sensor on  
the IR RX or and IR TX and therefore should replace them.  
Toll free: 1-877-536-3976  
Local: 1-408-962-0515  
5
 
SAFETY INFORMATION  
Safeguards  
To reduce the risk of electric shock, do not  
expose this product to rain or moisture  
Do not modify the wall plug. Doing so will  
void the warranty and safety features.  
If the wall plug does not fit into your local  
power socket, hire an electrician to replace  
your obsolete socket.  
This equipment should be installed near  
the socket outlet and the device should  
be easily accessible in the case it requires  
disconnection.  
Precautions  
FCC regulations state that any unauthorized changes or modifications to this equipment, not expressly ap-  
proved by the manufacturer, could void the users authority to operate this equipment.  
Operate this product using only the included external power supply. Use of other power supplies could impair  
performance, damage the product, or cause fires.  
In the event of an electrostatic discharge this device may automatically turn off. If this occurs, unplug the device  
and plug it back in.  
Protect and route power cords so they will not be stepped on or pinched by anything placed on or against  
them. Be especially careful of plug-ins or cord exit points from this product.  
Avoid excessive humidity, sudden temperature changes or temperature extremes.  
Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements, fish tanks, and  
swimming pools.  
Use only accessories recommended by Atlona to avoid fire, shock, or other hazards.  
Unplug the product before cleaning. Use a damp cloth for cleaning and not cleaning fluid or aerosols.  
Such products could enter the unit and cause damage, fire, or electric shock. Some substances may also mar  
the finish of the product.  
Never open, remove unit panels, or make any adjustments not described in this manual. Attempting to do so  
could expose you to dangerous electrical shock or other hazards. It may also cause damage to your AT-DVI4-  
100SR. Opening the product will void the warranty.  
Do not attempt to service the unit. Disconnect the product and contact your authorized Atlona reseller or con-  
tact Atlona directly.  
Toll free: 1-877-536-3976  
Local: 1-408-962-0515  
6
 
WARRANTY  
Limited Warranty  
Atlona Technologies warrants that (a) its products (the AT-DVI4-100SR) will perform substantially in accor-  
dance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that  
the product will be free from defects in materials and workmanship under normal use and service for a period  
of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited  
to 3 years from the date of receipt. Some jurisdictions do not allow such limitations on duration of an implied  
warranty, so the above limitation may not apply to customers that fall within those areas.  
Customer Remedies  
Atlona Technologies’ and its suppliers’ entire liability and Customers exclusive remedy shall be, at Atlona Tech-  
nologies’ decision, either return of the price paid for the product, repair, or replacement of the product that  
does not meet this Limited Warranty and which is returned to Atlona Technologies with a copy of the Cus-  
tomers receipt. This Limited Warranty is void if failure of the product has resulted from accident, abuse, misap-  
plication, or natural occurrence. In example but not limited to: power surges (electrical storms, local power out-  
age), dropping the product (or items on the product), contact with fluids, and physical misconduct (i.e. kicking  
or punching). Any replacement product will be warranted for the remainder of the original warranty period.  
No other warranties  
To the maximum extent permitted by applicable law, Atlona Technologies and its suppliers disclaim all other  
warranties, either expressed or implied, including, but not limited to, implied warranties of merchantability  
and fitness for a particular purpose, with regard to the product and any related written materials. This Limited  
Warranty gives customer specific legal rights. Customers may have other rights depending on the jurisdiction.  
No liability for damages  
To the maximum extent permitted by applicable law, in no event shall Atlona Technologies or its suppliers be  
liable for any damages arising out of the use of or inability to use this product, even if Atlona Technologies has  
been advised of the possibility of such damages. Such damages include but are not limited to: special, inciden-  
tal, consequential, or indirect damages for personal injury, loss of business profits, business interruption, loss  
of business information, or any other pecuniary loss.  
Atlona Technologies’ and its suppliers’ entire liability under any provision of this agreement shall be limited to  
the amount actually paid by you for the product. Some Jurisdictions do not allow the exclusion or limitation  
of liability for consequential or incidental damage. The above limitations may not apply to you in such jurisdic-  
tional cases.  
Toll free: 1-877-536-3976  
Local: 1-408-962-0515  
7
 
ATLONA PRODUCT REGISTRATION  
Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few  
moments to register your new purchase.  
Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll  
receive notification of performance issues and firmware updates.  
At Atlona, we respect and protect your privacy, assuring you that your registration information  
is completely secure. Atlona product registration is completely voluntary and failure to register will not  
diminish your limited warranty rights.  
Toll free: 1-877-536-3976  
8
Local: 1-408-962-0515  
 

3M Projection Television X15 User Manual
Accton Technology Switch ES3526XA User Manual
ADC Network Card FlexWave User Manual
Advantech Network Router SOM A2552 User Manual
Advantek Networks Switch ANS 08P User Manual
American Standard Plumbing Product 4433001 User Manual
Apple Network Card AirPort Networks User Manual
Atlona Home Theater System 64 M User Manual
Baby Jogger Bicycle Accessories Bicycle Accessories User Manual
Beko Oven CSM 52310 D User Manual