ThinkCentre
User Guide
Note
Before using this information and the product it supports, be sure to read and understand the ThinkCentre Safety and
First Edition (February 2010)
© Copyright Lenovo 2010.
LENOVO products, data, computer software, and services have been developed exclusively at private expense and
are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted
rights to use, reproduction and disclosure.
LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered
pursuant a General Services Administration ″GSA″ contract, use, reproduction, or disclosure is subject to restrictions
set forth in Contract No. GS-35F-05925.
Contents
© Copyright Lenovo 2010
iii
iv User Guide
Important safety information
CAUTION:
Before using this manual, be sure to read and understand all the related safety
information for this product. Refer to the ThinkCentre Safety and Warranty Guide
that you received with this product for the latest safety information. Reading
and understanding this safety information reduces the risk of personal injury
and or damage to your product.
If you no longer have a copy of the ThinkCentre Safety and Warranty Guide, you can
obtain a Portable Document Format (PDF) version from the Lenovo® Support Web
site at:
© Copyright Lenovo 2010
v
vi User Guide
Chapter 1. Product overview
This chapter provides information about the computer features, specifications,
preinstalled software programs, connector and part locations, and how to adjust
the computer stand.
This chapter contains the following topics:
computer.
software programs provided with your computer.
information to help you locate your computer connectors and parts.
how to adjust your computer stand.
Features
This section provides information about the computer features.
System information
The following information covers a variety of models. For information about
your specific model, use the Setup Utility program. See Chapter 4, “Using the
Microprocessor
Your computer comes with one of the following microprocessors (internal cache
size varies by model type):
v Intel® Celeron® dual-core microprocessor
v Intel Core™2 Duo microprocessor
v Intel Pentium® dual-core microprocessor
Memory module(s)
v For machine types 1165, 1184, and 1186, support up to two double data rate 2
dual inline memory modules (DDR2 DIMMs)
v For machine types 0401, 0994, and 2565, support up to two double data rate 3
dual inline memory modules (DDR3 DIMMs)
Internal drives
v One optical drive
v One Serial Advanced Technology Attachment (SATA) hard disk drive
Audio subsystem
v Integrated high-definition (HD) audio
v Microphone connector and headphone connector
v Internal speaker
© Copyright Lenovo 2010
1
Connectivity
v 10/100/1000 Mbps Ethernet controller
System management features
v Ability to store the power-on self-test (POST) hardware test results
v Advanced Configuration and Power Interface (ACPI) support
v Automatic power-on startup
v Desktop Management Interface (DMI)
v Preboot Execution Environment (PXE)
v System Management (SM) Basic Input/Output System (BIOS) and SM software
v Wake on LAN
Input/Output (I/O) features
v Ethernet connector
v One 9-pin serial port
v Six Universal Serial Bus (USB) connectors
v Two audio connectors (headphone connector and microphone connector)
Expansion
v One hard disk drive bay
v One optical drive bay
Power supply
v 130-watt power supply
Security features
v Computrace
v Enabling or disabling SATA devices
v Enabling or disabling USB connectors
v Startup sequence control
v Startup without keyboard or mouse
v Support for the addition of an integrated cable lock (Kensington lock)
v User password and administrator password for BIOS access
Preinstalled software programs
Your computer is preinstalled with some software programs to help you work
Preinstalled operating system
Your computer is preinstalled with one of the following operating systems:
v Microsoft® Windows® 7
v Microsoft Windows XP Professional
(preinstalled through downgrade rights in Windows 7 Professional)
2
User Guide
Operating system(s), certified or tested for compatibility1 (varies by model type)
v Linux®
Specifications
This section lists the physical specifications for your computer.
Dimensions
Width: 472 mm (18.58 inches)
Height: 355 mm (13.98 inches)
Depth: 70 mm (2.76 inches)
Weight
Maximum configuration as shipped: 7.2 kg (15.87 lbs)
Environment
Air temperature:
Operating: 10° to 35°C (50° to 95°F)
Non-operating: -20° to 50°C (-4° to 122°F) (with package)
Humidity:
Operating: 20% to 80% (10% per hour, non condensing)
Non-operating: 10% to 90% (10% per hour, non condensing)
Altitude:
Operating: -50 to 10 000 ft (-15.2 to 3 048 m)
Non-operating: -50 to 35 000 ft (-15.2 to 10 668 m)
Electrical input
Input voltage:
Low range:
Minimum: 100 V ac
Maximum: 127 V ac
Input frequency range: 50 to 60 Hz
High range:
Minimum: 200 V ac
Maximum: 240 V ac
Input frequency range: 50 to 60 Hz
Software overview
The computer comes with a preinstalled operating system and several preinstalled
applications.
Software provided with your Windows operating system
This section provides information about the software provided with your Windows
operating system.
1. The operating system(s) listed here are being certified or tested for compatibility at the time this publication goes to press.
Additional operating systems might be identified by Lenovo as compatible with your computer following the publication of this
manual. This list is subject to change. To determine if an operating system has been certified or tested for compatibility, check the
Web site of the operating system vendor.
Chapter 1. Product overview
3
Software provided by Lenovo
The following software programs are provided by Lenovo to help you improve
productivity and reduce the cost associated with maintaining your computer.
Software programs provided with your computer might vary depending on your
model type and preinstalled operating system.
Lenovo ThinkVantage Tools: The Lenovo ThinkVantage® Tools program guides
you to a host of information sources and provides easy access to various tools to
Note: The Lenovo ThinkVantage Tools program is only available on computers
with the Windows 7 operating system from Lenovo.
ThinkVantage Productivity Center: The ThinkVantage Productivity Center
program guides you to a host of information sources and tools to help you set up,
understand, and maintain your computer, and enhance your computer
Note: The ThinkVantage Productivity Center program is only available on
computers preinstalled with the Windows XP operating system from
Lenovo.
Lenovo Welcome: The Lenovo Welcome program introduces some innovative
built-in features of Lenovo to you and guides you through some important setup
tasks to help you make the most of your computer.
Note: The Lenovo Welcome program is only available on computers preinstalled
with the Windows 7 operating system from Lenovo.
Product Recovery: The Product Recovery program enables you to restore the
contents of the hard disk drive to the factory default settings.
ThinkVantage Rescue and Recovery: The ThinkVantage Rescue and Recovery®
(RnR) program is a one button recovery and restore solution that includes a set of
self-recovery tools to help you diagnose computer problems, get help, and recover
from system crashes, even if you cannot start the Windows operating system.
Note: The ThinkVantage Rescue and Recovery program is only available on
machine types 0401, 0994, and 2565.
Power Manager: The Power Manager program provides convenient, flexible, and
complete power management for your ThinkCentre® computer. By using the Power
Manager program, you can adjust your power settings to achieve the best balance
between system performance and power saving.
ThinkVantage System Update: The ThinkVantage System Update (TVSU)
program helps you keep the software on your computer up-to-date by
downloading and installing software packages (ThinkVantage applications, device
drivers, BIOS updates, and other third party applications). Some examples of
software that you should keep updated are programs provided by Lenovo, such as
the Rescue and Recovery program and the ThinkVantage Productivity Center
program.
4
User Guide
Lenovo ThinkVantage Toolbox
The Lenovo ThinkVantage Toolbox program helps you maintain your computer,
improve computing security, diagnose computer problems, get familiar with the
innovative technologies provided by Lenovo, and get more information about your
Note: The Lenovo ThinkVantage Toolbox program is only available on computers
preinstalled with the Windows 7 operating system from Lenovo.
Lenovo System Toolbox
The Lenovo System Toolbox program is preinstalled on your computer. This
diagnostic program works through the Windows operating system to help you test
hardware components of your computer. It can also report operating-system-
controlled settings that interfere with the correct operation of your system. For
Note: The Lenovo System Toolbox program is only available on computers
preinstalled with the Windows XP operating system from Lenovo.
PC-Doctor for Rescue and Recovery
The PC-Doctor for Rescue and Recovery diagnostic program is preinstalled on
your ThinkCentre computer as part of the Rescue and Recovery workspace to help
you diagnose hardware problems. It can also report operating-system-controlled
settings that interfere with the correct operation of your system. Use the PC-Doctor
for Rescue and Recovery diagnostic program if you are unable to start the
Windows operating system. For more information, see “PC-Doctor for Rescue and
Note: The PC-Doctor for Rescue and Recovery diagnostic program is only
available on machine types 0401, 0994, and 2565.
Adobe Reader
The Adobe Reader program is a tool used to view, print, and search PDF
documents.
viewing the publications.
Antivirus software
Your computer comes with antivirus software that you can use to detect and
eliminate viruses. Lenovo provides a full version of antivirus software on your
computer with a free 30-day subscription. After 30 days, you must renew the
license to continue receiving the antivirus software updates.
For more information about how to use your antivirus software, refer to the help
system of your antivirus software.
Chapter 1. Product overview
5
Locating computer connectors and parts
This section provides information to help you locate your computer connectors and
parts.
Figure 1. Front view
ꢀ1ꢁ Integrated camera (available in some ꢀ6ꢁ Microphone connector
models)
ꢀ2ꢁ Integrated microphone
ꢀ3ꢁ Brightness controls
ꢀ4ꢁ USB connectors (3)
ꢀ5ꢁ Headphone connector
ꢀ7ꢁ Power switch
ꢀ8ꢁ Power indicator light-emitting diode (LED)
ꢀ9ꢁ Internal speakers (2)
6
User Guide
Figure 2. Rear view
ꢀ1ꢁ Power cord connector
ꢀ2ꢁ Ethernet connector
ꢀ3ꢁ USB connectors (3)
ꢀ4ꢁ Serial port
ꢀ5ꢁ Integrated cable lock slot
ꢀ6ꢁ Optical drive
Chapter 1. Product overview
7
Adjusting the computer stand
Your computer comes with a computer stand that you can use to adjust the
computer to your comfortable position. Pull the stand open and adjust the position
of the computer at an angle between 10° to 35° as shown in the following
illustration.
CAUTION:
Make sure that the angle is at least 10° from the vertical; otherwise, the
computer might be unstable and fall over.
35°
10°
Figure 3. Adjusting the computer stand
8
User Guide
Chapter 2. Installing or replacing hardware
This chapter provides instructions on how to install or replace hardware for your
computer.
This chapter contains the following topics:
Installing or replacing hardware
This section provides instructions on how to install or replace hardware for your
computer. You can maintain your computer or expand the capabilities of your
computer by installing or replacing hardware.
Notes:
1. Use only computer parts provided by Lenovo.
2. When installing or replacing an option, use the appropriate instructions in this
section along with the instructions that come with the option.
Installing external options
You can install external options to your computer, such as external speakers, a
printer, or a scanner. For some external options, you must install additional
software in addition to making the physical connection. When you install an
identify the required connector. Then, use the instructions that come with the
option to help you make the connection and install any software or device drivers
that are required for the option.
Installing a computer wall mount
Your computer supports UL (Underwriters Laboratories) certified 100 mm × 100
mm (3.94 inches × 3.94 inches) wall mounts. For proper mounting, use four screws
of the following specifications:
Diameter × Pitch × Length: 4 mm × 0.7 mm × 10 mm (0.16 inch × 0.03 inch × 0.39
inch)
Note: When installing a computer wall mount, make sure that you leave at least a
60 mm (2.36 inches) space between the wall and your computer for easy
access to the connectors on the rear of your computer.
© Copyright Lenovo 2010
9
Replacing the keyboard or mouse
Attention
Do not attempt any repair before reading and understanding the “Important safety
information” in the ThinkCentre Safety and Warranty Guide that came with your computer.
To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
This section provides instructions on how to replace the keyboard or mouse.
To replace the wireless keyboard or mouse, refer to the instructions that come with
the wireless keyboard or mouse. You can also refer to your Windows Help and
Support information system for wireless related instructions.
To replace the USB keyboard or mouse, do the following:
1. Remove any media from the drives. Then, turn off all attached devices and the
computer.
2. Disconnect all power cords from electrical outlets.
3. Disconnect the old keyboard cable or mouse cable from the computer.
4. Connect a new keyboard or mouse to one of the USB connectors on the
computer. See “Locating computer connectors and parts” on page 6.
Figure 4. Connecting the USB keyboard or mouse
5. Reconnect all power cords to electrical outlets.
Note: In most areas of the world, Lenovo requires the return of the defective
Customer Replaceable Units (CRUs). Information about this will come with
the new CRUs or will come a few days after you receive the new CRUs.
Obtaining device drivers
You can obtain device drivers for operating systems that are not preinstalled at
files with the device driver files.
Basic security features
There are several security options available to help you prevent hardware theft and
unauthorized access to your computer. In addition to physical locks, you can also
prevent unauthorized use of your computer by a software lock that locks the
keyboard until a correct password is typed in.
10 User Guide
Integrated cable lock
Note: Make sure that any security cables you installed do not interfere with other
computer cables.
An integrated cable lock, sometimes referred to as the Kensington lock, can be
used to secure your computer to a desk, a table, or other non-permanent fixture.
The integrated cable lock attaches to the integrated cable lock slot in the rear of
parts” on page 6 for the location of the integrated cable lock slot. This is the same
type of lock used with many notebook computers. You can order an integrated
cable lock from Lenovo by searching for Kensington at:
Password protection
To deter unauthorized use of your computer, you can use the Setup Utility
program to set a password. When you turn on your computer, you are prompted
to type the password. The computer cannot be used until a valid password is
more information.
Chapter 2. Installing or replacing hardware 11
12 User Guide
Chapter 3. Recovery information
This chapter provides information about the recovery solutions provided by
Lenovo.
This chapter contains the following topics:
Notes:
1. There are a variety of methods to choose from when considering how to
recover in the event of a software- or hardware-related problem. Some methods
vary depending on the type of your operating system.
2. The product on the recovery media may be used only for the following
purposes:
v Restore the product preinstalled on your computer
v Reinstall the product
v Modify the product using the Additional Files
Creating and using recovery media
You can use recovery media to restore the hard disk drive to the factory default
settings. Recovery media are useful if you transfer the computer to another area,
sell the computer, recycle the computer, or put the computer in an operational state
after all other methods of recovery have failed. As a precautionary measure, it is
important to create recovery media as early as possible.
Note: The recovery operations you can perform using recovery media vary
depending on the operating system from which the recovery media were
created. The recovery media might contain a boot medium and a data
medium. Your Microsoft Windows license permits you to create only one
data medium, so it is important that you store the recovery media in a safe
place after you have made them.
Creating recovery media
This section provides instructions on how to create recovery media on different
operating systems.
Note: On the Windows 7 operating system, you can create recovery media using
discs or external USB storage devices. On the Windows XP operating
system, you can create recovery media using only discs, so this operation is
also called ″creating Product Recovery discs.″
v To create recovery media on the Windows 7 operating system, click Start → All
Programs → Lenovo ThinkVantage Tools → Factory Recovery Disks. Then,
follow the instructions on the screen.
© Copyright Lenovo 2010
13
v To create Product Recovery discs on the Windows XP operating system, click
Start → All Programs → ThinkVantage → Create Recovery Media. Then, follow
the instructions on the screen.
Using recovery media
This section provides instructions on how to use recovery media on different
operating systems.
v On the Windows 7 operating system, you can use recovery media to restore the
computer to the factory default settings only. You can use recovery media to put
the computer in an operational state after all other methods of recovery have
failed.
Attention: When you use recovery media to restore the computer to the factory
default settings, all the files currently on the hard disk drive will be deleted and
replaced by the factory default settings.
To use recovery media on the Windows 7 operating system, do the following:
1. Depending on the type of your recovery media, connect the boot medium
(memory key or other USB storage device) to the computer, or insert the boot
disc into the optical drive.
2. Repeatedly press and release the F12 key when turning on the computer.
When the Startup Device Menu opens, release the F12 key.
3. Select the desired startup device and press Enter. The restore process begins.
4. Follow the instructions on the screen to complete the operation.
Notes:
1. After restoring your computer to the factory default settings, you might have
to reinstall device drivers for some devices. See “Installing or reinstalling
2. Some computers come with Microsoft Office or Microsoft Works preinstalled.
If you need to recover or reinstall your Microsoft Office or Microsoft Works
applications, you must use the Microsoft Office CD or Microsoft Works CD.
These discs are provided only with computers preinstalled with Microsoft
Office or Microsoft Works.
v On the Windows XP operating system, you can use Product Recovery discs to
restore your computer to the factory default settings, perform a custom factory
recovery, or perform other rescue and recovery operations such as rescuing
individual files. You will be given the option to enter the Rescue and Recovery
workspace and choose from a variety of recovery operations.
Attention: When you use Product Recovery discs to restore the computer to
the factory default settings, all the files currently on the hard disk drive will be
deleted and replaced by the factory default settings. During the restore process,
you will be given the option to save one or more files currently on the hard disk
drive to other media before the data is deleted.
To use Product Recovery discs on the Windows XP operating system, do the
following:
1. Repeatedly press and release the F12 key when turning on the computer.
When the Startup Device Menu opens, release the F12 key.
2. Insert the boot disc into the optical drive.
3. Select the optical drive with the boot disc as the startup device and press
Enter. After a short delay, the Rescue and Recovery workspace opens.
4. On the Rescue and Recovery menu, click Restore your system.
5. Follow the instructions on the screen. Insert the appropriate Product
Recovery disc when prompted.
14 User Guide
Performing backup and recovery operations
Note: The information in this section applies only to machine types 0401, 0994,
and 2565, which have the Rescue and Recovery program preinstalled.
The Rescue and Recovery program enables you to back up all your hard disk drive
contents including the operating system, data files, software programs, and
personal settings. You can designate where the Rescue and Recovery program
stores the backup:
v In a protected area of your hard disk drive
v On the secondary hard disk drive if a secondary hard disk drive is installed in
your computer
v On an attached external USB hard disk drive
v On a network drive
v On recordable discs (a recordable optical drive is required for this option)
After you have backed up the contents on the hard disk drive, you can restore the
complete contents of the hard disk drive, restore only the selected files, or restore
only the Windows operating system and applications.
Performing a backup operation
This section provides instructions on how to perform a backup operation using the
Rescue and Recovery program on different operating systems.
v To perform a backup operation using the Rescue and Recovery program on the
Windows 7 operating system, do the following:
1. From the Windows desktop, click Start → All Programs → Lenovo
ThinkVantage Tools → Enhanced Backup and Restore. The Rescue and
Recovery program opens.
2. In the Rescue and Recovery main window, click the Launch advanced
Rescue and Recovery arrow.
3. Click Back up your hard drive and select backup operation options. Then,
follow the instructions on the screen to complete the backup operation.
v To perform a backup operation using the Rescue and Recovery program on the
Windows XP operating system, do the following:
1. From the Windows desktop, click Start → All Programs → ThinkVantage →
Rescue and Recovery. The Rescue and Recovery program opens.
2. In the Rescue and Recovery main window, click Launch advanced Rescue
and Recovery → Back up your hard drive, and select backup operation
options.
3. Follow the instructions on the screen to complete the backup operation.
Chapter 3. Recovery information 15
Performing a recovery operation
This section provides instructions on how to perform a recovery operation using
the Rescue and Recovery program on different operating systems.
v To perform a recovery operation using the Rescue and Recovery program on the
Windows 7 operating system, do the following:
1. From the Windows desktop, click Start → All Programs → Lenovo
ThinkVantage Tools → Enhanced Backup and Restore. The Rescue and
Recovery program opens.
2. In the Rescue and Recovery main window, click the Launch advanced
Rescue and Recovery arrow.
3. Click the Restore your system from a backup icon.
4. Follow the instructions on the screen to complete the recovery operation.
v To perform a recovery operation using the Rescue and Recovery program on the
Windows XP operating system, do the following:
1. From the Windows desktop, click Start → All Programs → ThinkVantage →
Rescue and Recovery. The Rescue and Recovery program opens.
2. In the Rescue and Recovery main window, click Launch advanced Rescue
and Recovery.
3. Click the Restore your system from a backup icon.
4. Follow the instructions on the screen to complete the recovery operation.
For more information about performing a recovery operation from the Rescue and
Recovery workspace, see “Using the Rescue and Recovery workspace.”
Using the Rescue and Recovery workspace
Note: The information in this section applies only to machine types 0401, 0994,
and 2565, which have the Rescue and Recovery program preinstalled.
The Rescue and Recovery workspace resides in a protected, hidden area of your
hard disk drive that operates independently from the Windows operating system.
This enables you to perform recovery operations even if you cannot start the
Windows operating system. You can perform the following recovery operations
from the Rescue and Recovery workspace:
v Rescue files from your hard disk drive or from a backup
The Rescue and Recovery workspace enables you to locate files on your hard
disk drive and transfer them to a network drive or other recordable media, such
as a USB device or a disc. This solution is available even if you did not back up
your files or if changes were made to the files since your last backup operation.
You can also rescue individual files from a Rescue and Recovery backup located
on your local hard disk drive, a USB device, or a network drive.
v Restore your hard disk drive from a Rescue and Recovery backup
If you have backed up your hard disk drive using the Rescue and Recovery
program, you can restore the hard disk drive from a Rescue and Recovery
backup, even if you cannot start the Windows operating system.
v Restore your hard disk drive to the factory default settings
The Rescue and Recovery workspace enables you to restore the complete
contents of your hard disk drive to the factory default settings. If you have
multiple partitions on your hard disk drive, you have the option to restore the
factory default settings to the C: partition and leave the other partitions intact.
Because the Rescue and Recovery workspace operates independently from the
16 User Guide
Windows operating system, you can restore the factory default settings even if
you cannot start the Windows operating system.
Attention: If you restore the hard disk drive from a Rescue and Recovery backup
or restore the hard disk drive to the factory default settings, all files on the
primary hard disk drive partition (usually drive C:) will be deleted in the recovery
process. If possible, make copies of important files. If you are unable to start the
Windows operating system, you can use the rescue files feature of the Rescue and
Recovery workspace to copy files from your hard disk drive to other media.
To start the Rescue and Recovery workspace, do the following:
1. Make sure the computer is turned off.
2. Repeatedly press and release the F11 key when turning on the computer. When
you hear beeps or see a logo screen, release the F11 key.
3. If you have set a Rescue and Recovery password, type your password when
prompted. The Rescue and Recovery workspace opens after a short delay.
4. Do one of the following:
v To rescue files from your hard disk drive or from a backup, click Rescue
files and follow the instructions on the screen.
v To restore your hard disk drive from a Rescue and Recovery backup or to
restore your hard disk drive to the factory default settings, click Restore your
system and follow the instructions on the screen.
For more information about the features of the Rescue and Recovery workspace,
click Help.
Notes:
1. After restoring your hard disk drive to the factory default settings, you might
have to reinstall device drivers for some devices. See “Installing or reinstalling
2. Some computers come with Microsoft Office or Microsoft Works preinstalled. If
you need to recover or reinstall your Microsoft Office or Microsoft Works
applications, you must use the Microsoft Office CD or Microsoft Works CD. These
discs are provided only with computers preinstalled with Microsoft Office or
Microsoft Works.
Creating and using a rescue medium
With a rescue medium, such as a disc or a USB hard disk drive, you can recover
the computer from failures that prevent you from gaining access to the Rescue and
Recovery workspace on your hard disk drive.
Notes:
1. The information in this section applies only to machine types 0401, 0994, and
2565, which have the Rescue and Recovery program preinstalled.
2. The recovery operations you can perform using a rescue medium vary
depending on the operating system.
3. The rescue disc can be started in all types of optical drives.
4. You can also run the PC-Doctor for Rescue and Recovery diagnostic program,
after using a rescue medium to recover the computer from failures and gaining
access to the Rescue and Recovery workspace.
Chapter 3. Recovery information 17
Creating a rescue medium
This section provides instructions on how to create a rescue medium on different
operating systems.
v To create a rescue medium on the Windows 7 operating system, do the
following:
1. From the Windows desktop, click Start → All Programs → Lenovo
ThinkVantage Tools → Enhanced Backup and Restore. The Rescue and
Recovery program opens.
2. In the Rescue and Recovery main window, click the Launch advanced
Rescue and Recovery arrow.
3. Click the Create Rescue Media icon. The Create Rescue and Recovery Media
window opens.
4. In the Rescue Media area, select the type of the rescue medium you want to
create. You can create a rescue medium using a disc, a USB hard disk drive,
or a secondary internal hard disk drive.
5. Click OK and follow the instructions on the screen to create a rescue
medium.
v To create a rescue medium on the Windows XP operating system, do the
following:
1. From the Windows desktop, click Start → All Programs → ThinkVantage →
Create Recovery Media. The Create Rescue and Recovery Media window
opens.
2. In the Rescue Media area, select the type of the rescue medium you want to
create. You can create a rescue medium using a disc, a USB hard disk drive,
or a secondary internal hard disk drive.
3. Click OK and follow the instructions on the screen to create a rescue
medium.
Using a rescue medium
This section provides instructions on how to use the rescue medium you have
created.
v If you have created a rescue medium using a disc, do the following to use the
rescue medium:
1. Turn off your computer.
2. Repeatedly press and release the F12 key when turning on the computer.
When the Startup Device Menu opens, release the F12 key.
3. On the Startup Device Menu, select the desired optical drive as the first boot
device. Then, insert the rescue disc into the optical drive and press Enter. The
rescue medium starts.
v If you have created a rescue medium using a USB hard disk drive, do the
following to use the rescue medium:
1. Attach the USB hard disk drive to one of the USB connectors on your
computer.
2. Repeatedly press and release the F12 key when turning on the computer.
When the Startup Device Menu opens, release the F12 key.
3. On the Startup Device Menu, select the USB hard disk drive as the first boot
device and press Enter. The rescue medium starts.
18 User Guide
v If you have created a rescue medium using the secondary internal hard disk
drive, set the secondary internal hard disk drive as the first boot device in the
startup device sequence to start the rescue medium. See “Selecting a startup
Note: The secondary internal hard disk drive is only available in some
computer models.
When the rescue medium starts, the Rescue and Recovery workspace opens. The
help information for each feature is available from the Rescue and Recovery
workspace. Follow the instructions to complete the recovery process.
Installing or reinstalling device drivers
Before installing or reinstalling device drivers, make sure that you have a
preinstalled operating system and the documentation and software media for the
device.
Device drivers for factory-installed devices are located on the computer hard disk
drive (usually drive C:) in the SWTOOLS\DRIVERS subdirectory. The latest device
support. Other device drivers are on the software media that come with individual
devices.
To install or reinstall the device driver for a factory-installed device, do the
following:
1. Turn on the computer.
2. Use Windows Explorer or My Computer to display the directory structure of
your hard disk drive.
3. Go to the C:\SWTOOLS directory.
4. Open the DRIVERS folder. Within the DRIVERS folder, there are several
subfolders named for various devices installed in your computer, such as
AUDIO or VIDEO.
5. Open the appropriate device subfolder.
6. Do one of the following:
v In the device subfolder, look for a SETUP.exe file. Double-click the file and
follow the instructions on the screen to complete the installation.
v In the device subfolder, look for a README.txt file or a file with the .txt
extension. This file might be named after the operating system, such as
WIN98.txt. The TXT file contains information about how to install the device
driver. Follow the instructions to complete the installation.
v If the device subfolder contains a file with the .inf extension and you want to
install the device driver using the INF file, refer to your Windows Help and
Support information system for detailed information about how to install the
device driver.
Solving recovery problems
If you are unable to access the Rescue and Recovery workspace or the Windows
environment, do one of the following:
Note: The Rescue and Recovery workspace is only available on machine types
0401, 0994, and 2565.
Chapter 3. Recovery information 19
v Use recovery media if all other methods of recovery have failed and you need to
restore the hard disk drive to the factory default settings. See “Creating and
Note: If you are unable to access the Rescue and Recovery workspace or the
Windows environment from a rescue medium or recovery media, you might
not have the rescue device (an internal hard disk drive, a disc, a USB hard
disk drive, or other external devices) set as the first boot device in the
startup device sequence. You must first make sure that your rescue device is
set as the first boot device in the startup device sequence in the Setup Utility
information about temporarily or permanently changing the startup device
sequence. For more information about the Setup Utility program, see
It is important to create a rescue medium and a set of recovery media as early as
possible and store them in a safe place for future use.
20 User Guide
Chapter 4. Using the Setup Utility program
You can use the Setup Utility program to view and change the configuration
settings of your computer, regardless of which operating system you are using.
However, the operating system settings might override any similar settings in the
Setup Utility program.
This chapter provides information about the following topics to help you use the
Setup Utility program:
Starting the Setup Utility program
This section provides instructions on how to start the Setup Utility program.
To start the Setup Utility program, do the following:
1. Make sure your computer is turned off.
2. Repeatedly press and release the F1 key when turning on the computer. When
you hear multiple beeps or see a logo screen, release the F1 key. The Setup
Utility program opens.
Note: If a password has been set, the Setup Utility program menu will not be
displayed until you type the correct password. For more information, see
Viewing or changing settings
The Setup Utility program menu lists various items about the system configuration
settings. To view or change the settings, start the Setup Utility program. See
“Starting the Setup Utility program.” Then, follow the instructions on the screen.
When working with the Setup Utility program, you must use the keyboard. The
keys used to perform various tasks are displayed at the bottom of each screen.
Using passwords
By using the Setup Utility program, you can set a password to prevent
unauthorized access to your computer and data. The following options are
available to help you set a user password or an administrator password:
v Set User Password
v Set Administrator Password
You do not have to set a password to use your computer. However, using a
password improves computing security. If you decide to set a password, read the
following sections.
© Copyright Lenovo 2010
21
Password considerations
A password can be any combination of up to 16 (1 to 16) alphabetic and numeric
characters. For security reasons, it is recommended to use a strong password that
cannot be easily compromised. To set a strong password, use the following
guidelines:
Note: The Setup Utility program passwords are not case sensitive.
v Have at least eight characters in length
v Contain at least one alphabetic character and one numeric character
v Not be your name or your user name
v Not be a common word or a common name
v Be significantly different from your previous passwords
User password
After you have set a user password using the Set User Password option, a
password prompt is displayed each time you turn on the computer. You cannot
use the computer until a valid password is typed in. For more information on how
to set a password, see “Setting, changing, or deleting a password.”
Administrator password
The Set Administrator Password option enables you to set an administrator
password, which deters unauthorized users from changing configuration settings.
If you are responsible for maintaining the settings of several computers, you might
want to set an administrator password. For more information on how to set a
password, see “Setting, changing, or deleting a password.”
After you have set an administrator password, a password prompt is displayed
each time you try to access the Setup Utility program. You cannot access the Setup
Utility program until a valid password is typed in.
If you have set both a user password and an administrator password, you can type
either password to use your computer. However, to change any configuration
settings, you must use your administrator password.
Setting, changing, or deleting a password
This section provides instructions on how to set, change, or delete a password.
To set, change, or delete a password, do the following:
2. From the Setup Utility program main menu, select Security → Set User
Password or Set Administrator Password.
3. Follow the instructions on the screen to set, change, or delete a password.
Note: A password can be any combination of up to 16 (1 to 16) alphabetic and
numeric characters. For more information, see “Password
22 User Guide
Enabling or disabling a device
This section provides instructions on how to enable or disable user access to a
device.
USB Setup
Use this option to set up USB connectors.
SATA Controller
When this option is set to Disabled, all devices connected to the
SATA connectors (such as the hard disk drive or the optical drive)
are disabled and will not be displayed in the system configuration.
To enable or disable a device, do the following:
2. From the Setup Utility program main menu, select Devices.
3. Depending on the device you want to enable or disable, do one of the
following:
v Select USB Setup and follow the instructions on the screen to enable or
disable the USB connector(s) of your choice.
v Select ATA Drives Setup → SATA Controller to enable or disable the devices
connected to the SATA connectors on the system board.
4. Select the desired settings and press Enter.
5. Press Esc to return to the Setup Utility program main menu. You might have to
press Esc several times.
6. Press F10 to save the new settings and exit the Setup Utility program.
Notes:
a. If you do not want to save the settings, select Exit → Discard Changes and
Exit.
b. If you want to return to the default settings, press F9 or select Exit → Load
Optimal Defaults.
Selecting a startup device
If your computer does not start up from a device (such as a hard disk drive or the
disc in an optical drive) as expected, do one of the following to select the desired
startup device.
Selecting a temporary startup device
This section provides instructions on how to select a temporary startup device. You
can use the instructions in this section to start up from any startup device.
Note: Not all discs and hard disk drives are bootable.
To select a temporary startup device, do the following:
1. Turn off your computer.
2. Repeatedly press and release the F12 key when turning on the computer. When
the Startup Device Menu opens, release the F12 key.
3. Select the desired startup device on the Startup Device Menu and press Enter
to begin.
Chapter 4. Using the Setup Utility program 23
Note: Selecting a startup device on the Startup Device Menu does not
permanently change the startup device sequence.
Viewing or changing the startup device sequence
This section provides instructions on how to view or permanently change the
configured startup device sequence.
To view or permanently change the configured startup device sequence, do the
following:
2. Select Startup → Primary Boot Sequence. Read the information displayed on
the right side of the screen.
3. Select the first boot device, second boot device, and so on.
4. Press Esc to return to the Startup menu. Then, select the devices for the
Automatic Boot Sequence and Error Boot Sequence.
5. Press Esc to return to the Setup Utility program main menu. You might have to
press Esc several times.
6. Press F10 to save the new settings and exit the Setup Utility program.
Notes:
a. If you do not want to save the settings, select Exit → Discard Changes and
Exit.
b. If you want to return to the default settings, press F9 or select Exit → Load
Optimal Defaults.
Exiting the Setup Utility program
After you finish viewing or changing settings, press Esc to return to the Setup
Utility program main menu. You might have to press Esc several times. Then, you
can do one of the following:
v If you want to save the new settings and exit the Setup Utility program, press
F10. Otherwise, your changes will not be saved.
v If you do not want to save the new settings, select Exit → Discard Changes and
Exit.
v If you want to return to the default settings, press F9 or select Exit → Load
Optimal Defaults.
24 User Guide
Chapter 5. Updating system programs
This chapter provides information about updating the POST and BIOS, and how to
recover from a POST and BIOS update failure.
This chapter contains the following topics:
Using system programs
System programs are the basic layer of software built into your computer. System
programs include the POST, the BIOS, and the Setup Utility program. The POST is
a set of tests and procedures that are performed each time you turn on your
computer. The BIOS is a layer of software that translates instructions from other
layers of software into electrical signals that the computer hardware can execute.
You can use the Setup Utility program to view or change the configuration and
setup of your computer.
Your computer system board has a module called electrically erasable
programmable read-only memory (EEPROM, also referred to as flash memory).
You can easily update the POST, the BIOS, and the Setup Utility program by
starting your computer with a system-program-update disc or running a special
update program from your operating system.
Lenovo might make changes and enhancements to the POST and BIOS. When
updates are released, they are available as downloadable files on the Lenovo Web
are available in a TXT file that is included with the update files. For most models,
you can download either an update program to create a system-program-update
disc or an update program that can be run from the operating system.
Updating (flashing) the BIOS from a disc
This section provides instructions on how to update (flash) the BIOS from a disc.
Note: You can download a self-starting bootable disc image (known as an ISO
image) with the system program updates to create a system-program-update
disc. Go to:
To update (flash) the BIOS from a disc, do the following:
1. Turn off your computer.
2. Repeatedly press and release the F12 key when turning on the computer. When
the Startup Device Menu opens, release the F12 key.
3. On the Startup Device Menu, select the desired optical drive as the first boot
device. Then, insert the disc into the optical drive and press Enter. The update
begins.
© Copyright Lenovo 2010
25
4. When prompted to change the serial number, it is suggested that you press N.
However, if you do want to change the serial number, press Y, then type in the
serial number and press Enter.
5. When prompted to change the machine type and model, it is suggested that
you press N. However, if you do want to change the machine type and model,
press Y, then type in the machine type and model and press Enter.
6. Follow the instructions on the screen to complete the update. After the update
is completed, remove the disc from the optical drive.
Updating (flashing) the BIOS from your operating system
Note: Because Lenovo makes constant improvements to its Web sites, the Web
page contents are subject to change without notice, including the contents
referenced in the following procedure.
To update (flash) the BIOS from your operating system, do the following:
2. Do the following to locate the downloadable files for your machine type:
a. In the Enter a product number field, type your machine type and click Go.
b. Click Downloads and drivers.
c. Select BIOS from the Refine results drop-down list box to easily locate all
the BIOS related links.
d. Click the BIOS update link.
3. Click the TXT file that contains the instructions for updating (flashing) the BIOS
from your operating system.
4. Print these instructions. This is very important because these instructions will
not be displayed on the screen after the download begins.
5. Follow the printed instructions to download, extract, and install the update.
26 User Guide
Chapter 6. Troubleshooting and diagnostic programs
This chapter provides information about some basic troubleshooting and diagnostic
programs. If your computer problem is not described in this chapter, see Chapter 7,
“Getting information, help, and service,” on page 33 for additional troubleshooting
resources.
This chapter contains the following topics:
Basic troubleshooting
The following table provides some basic information to help you troubleshoot your
computer problems.
Note: If you cannot solve the problem after doing the basic troubleshooting, have
the computer serviced. Refer to the ThinkCentre Safety and Warranty Guide
that came with your computer for the safety and warranty information and
the list of Lenovo Support telephone numbers.
Symptom
Action
The computer does not start
when you press the power
switch.
Verify that:
v The power cord is correctly connected to the rear of the computer and to a
working electrical outlet.
v The power indicator on the front of the computer is on.
v The computer voltage matches the voltage available at the electrical outlet for
your country or region.
The monitor screen is blank.
Verify that:
v The power cord is correctly connected to the rear of the computer and to a
working electrical outlet.
v The computer voltage matches the voltage available at the electrical outlet for
your country or region.
v The brightness and contrast controls are set correctly.
The USB keyboard or mouse
does not work.
Verify that:
v The computer is turned on.
v The USB keyboard or mouse is correctly connected to one of the USB
connectors on the computer.
v For the USB keyboard, no keys are stuck.
© Copyright Lenovo 2010
27
Symptom
Action
The wireless keyboard or mouse Verify that:
does not work.
v The computer is turned on.
v The battery or batteries installed in the wireless keyboard or mouse are in
good condition.
v The wireless configurations are all set correctly. You might need to refer to the
documentation that come with the wireless keyboard or mouse, or refer to
your Windows Help and Support information system for wireless related
instructions. If your wireless mouse has a dongle, make sure the dongle is
correctly connected to one of the USB connectors on the computer.
v For the wireless keyboard, no keys are stuck.
The operating system does not
start.
Verify that you list the device where the operating system resides in the startup
device sequence. Usually, the operating system is on the hard disk drive. For
more information, see “Selecting a startup device” on page 23.
The computer beeps multiple
times before the operating
system starts.
Verify that no keys are stuck.
Diagnostic programs
Diagnostic programs are used to test hardware components of your computer.
Diagnostic programs can also report operating-system-controlled settings that
interfere with the correct operation of your system. The following program(s) are
preinstalled on your computer to help you diagnose computer problems:
v Lenovo ThinkVantage Toolbox or Lenovo System Toolbox, depending on your
operating system (used when you are running the Windows operating system)
v PC-Doctor for Rescue and Recovery (used when you cannot start the Windows
operating system)
Note: The PC-Doctor for Rescue and Recovery diagnostic program is only
available on machine types 0401, 0994, and 2565.
Notes:
1. You can also download the PC-Doctor for DOS diagnostic program from
detailed information.
2. If you are unable to isolate and repair the problem yourself after running the
programs, save and print the log files created by the programs. You will need
the log files when you speak to a Lenovo technical support representative.
Lenovo ThinkVantage Toolbox
Note: The Lenovo ThinkVantage Toolbox program is only available on computers
preinstalled with the Windows 7 operating system from Lenovo.
The Lenovo ThinkVantage Toolbox program helps you maintain your computer,
improve computing security, diagnose computer problems, get familiar with the
innovative technologies provided by Lenovo, and get more information about your
computer. You can use the diagnostics feature of the Lenovo ThinkVantage Toolbox
program to test devices, diagnose computer problems, create bootable diagnostic
media, update system drivers, and view system information.
28 User Guide
To run the Lenovo ThinkVantage Toolbox program, click Start → All Programs →
Lenovo ThinkVantage Tools → System Health and Diagnostics. Follow the
instructions on the screen.
For additional information about running the Lenovo ThinkVantage Toolbox
program, refer to the Lenovo ThinkVantage Toolbox help system.
Lenovo System Toolbox
Note: The Lenovo System Toolbox program is only available on computers
preinstalled with the Windows XP operating system from Lenovo.
The Lenovo System Toolbox program works through the Windows operating
system to enable you to test devices, view symptoms and solutions for computer
problems, update system drivers, and view system information.
To run the Lenovo System Toolbox program, click Start → All Programs → Lenovo
Services → Lenovo System Toolbox. Follow the instructions on the screen.
For additional information about running the Lenovo System Toolbox program,
refer to the Lenovo System Toolbox help system.
PC-Doctor for Rescue and Recovery
Note: The PC-Doctor for Rescue and Recovery diagnostic program is only
available on machine types 0401, 0994, and 2565.
The PC-Doctor for Rescue and Recovery diagnostic program is part of the Rescue
and Recovery workspace on your Lenovo computer. Use the PC-Doctor for Rescue
and Recovery program if you are unable to start the Windows operating system.
To run the PC-Doctor for Rescue and Recovery program from the Rescue and
Recovery workspace, do the following:
1. Turn off the computer.
2. Repeatedly press and release the F11 key when turning on the computer. When
you hear beeps or see a logo screen, release the F11 key. The Rescue and
Recovery workspace opens after a short delay.
3. From the Rescue and Recovery workspace, select Launch advanced Rescue and
Recovery → Diagnose hardware. The PC-Doctor for Rescue and Recovery
program opens.
4. Select the desired diagnostic test. Then, follow the instructions on the screen.
For additional information about running the PC-Doctor for Rescue and Recovery
program, refer to the PC-Doctor for Rescue and Recovery help system.
Note: If you encounter failures that prevent you from gaining access to the Rescue
and Recovery workspace, you can run the PC-Doctor for Rescue and
Recovery program after using a rescue medium to recover the computer
from failures and gaining access to the Rescue and Recovery workspace. See
PC-Doctor for DOS
You can also download the latest version of the PC-Doctor for DOS diagnostic
Chapter 6. Troubleshooting and diagnostic programs 29
diagnostic program runs independently of the Windows operating system. Use the
PC-Doctor for DOS diagnostic program if you are unable to start the Windows
operating system. You can run the PC-Doctor for DOS diagnostic program from a
diagnostic disc that you created.
Creating a diagnostic disc
This section provides instructions on how to create a diagnostic disc.
To create a diagnostic disc, do the following:
1. Download a self-starting bootable disc image (known as an ISO image) of the
diagnostic program from:
2. Use any CD/DVD burning software to create a diagnostic disc with the ISO
image.
Running the diagnostic program from the diagnostic disc
This section provides instructions on how to run the diagnostic program from the
diagnostic disc that you created.
To run the diagnostic program from the diagnostic disc that you created, do the
following:
1. Make sure that your computer is turned off.
2. Repeatedly press and release the F12 key when turning on the computer. When
the Startup Device Menu opens, release the F12 key.
3. Insert the diagnostic disc into the optical drive.
4. Select the optical drive with the diagnostic disc as the startup device and press
Enter. The diagnostic program opens.
5. Follow the instructions on the screen to run the desired diagnostic test. For
additional help, press the F1 key.
6. Remove the diagnostic disc from the optical drive after completing the
diagnostic test.
Cleaning the mouse
This section provides instructions on how to clean an optical or non-optical mouse.
Optical mouse
An optical mouse uses a LED and an optical sensor to navigate the pointer. If the
pointer on the screen does not move smoothly with the optical mouse, you might
need to clean the mouse.
To clean the optical mouse, do the following:
1. Turn off your computer.
2. Disconnect the mouse cable from the computer.
3. Turn the mouse upside down to look at the lens.
a. If there is a smudge on the lens, gently clean the area with a plain
cotton-tipped swab.
b. If there is debris in the lens, gently blow the debris away from the area.
4. Check the surface on which you are using the mouse. If you have a very
intricate picture or pattern beneath the mouse, it may be difficult for the digital
signal processor (DSP) to determine changes in the mouse position.
5. Reconnect the mouse cable to the computer.
30 User Guide
6. Turn your computer back on.
Non-optical mouse
The following illustration shows the components of a non-optical mouse.
Note: The illustration might be slightly different from your mouse.
ꢀ1ꢁ Retainer ring
ꢀ2ꢁ Ball
ꢀ3ꢁ Plastic rollers
ꢀ4ꢁ Ball cage
The non-optical mouse uses a ball to navigate the pointer. If the pointer on the
screen does not move smoothly with the mouse, you might need to clean the
mouse.
To clean the non-optical mouse, do the following:
1. Turn off your computer.
2. Disconnect the mouse cable from the computer.
3. Turn the mouse upside down. Twist the retainer ring ꢀ1ꢁ to the unlocked
position to reveal the ball.
4. Place your hand over the retainer ring and ball ꢀ2ꢁ, and then turn the mouse
bottom-side down, so that the retainer ring and ball fall out into your hand.
5. Wash the ball in warm, soapy water. Then, dry it with a clean cloth.
6. Carefully blow air into the ball cage ꢀ4ꢁ to dislodge dust and lint.
7. Look for a buildup of dirt on the plastic rollers ꢀ3ꢁ inside the ball cage. This
buildup usually appears as a stripe running across the middle of the rollers.
Chapter 6. Troubleshooting and diagnostic programs 31
8. If the rollers are dirty, clean them by using a cotton swab soaked in isopropyl
(rubbing) alcohol. Turn the rollers with your finger and continue swabbing
them until all the dirt is removed. Be sure the rollers are still centered in their
channels after you clean them.
9. Remove any fibers from the swab that might be remaining on the rollers.
10. Reinstall the ball and the retainer ring. Twist the retainer ring to the locked
position.
11. Reconnect the mouse cable to the computer.
12. Turn your computer back on.
32 User Guide
Chapter 7. Getting information, help, and service
This chapter provides information about help, service, and technical assistance for
Lenovo products.
This chapter contains the following topics:
Information resources
You can use the information in this section to access useful resources relating to
your computing needs.
Online Books folder
The Online Books folder preinstalled on your computer contains the ThinkCentre
User Guide, which provides information about your computer to help you set up,
use, and maintain your computer. It requires no Internet access to view the
publication.
To view the publication, click Start → All Programs → Online Books → Online
Books, then double-click the publication for your computer. The publication is also
available on the Lenovo Support Web site at:
Notes:
1. The publication is in PDF version. To view the publication, you need to have
the Adobe Reader program preinstalled on your computer. If the Adobe Reader
program has not been installed on your computer, a message will be displayed
when you attempt to view the PDF file and you will be guided through the
Adobe Reader installation.
2. The publication is available in other languages on the Lenovo Support Web site
at:
3. If you want to install a different language version of the Adobe Reader
program rather than the version preinstalled on your computer, download the
desired language version from the Adobe Web site at:
Lenovo ThinkVantage Tools
Note: The Lenovo ThinkVantage Tools program is only available on computers
with the Windows 7 operating system from Lenovo.
The Lenovo ThinkVantage Tools program helps you work more easily and securely
by providing easy access to various tools, such as:
v Lenovo ThinkVantage Toolbox
v Power Manager
v Product Recovery
v Rescue and Recovery (available on machine types 0401, 0994, and 2565)
© Copyright Lenovo 2010
33
v System Update
To access the Lenovo ThinkVantage Tools program, click Start → All Programs →
Lenovo ThinkVantage Tools.
ThinkVantage Productivity Center
Note: The ThinkVantage Productivity Center program is only available on
computers preinstalled with the Windows XP operating system from
Lenovo.
The ThinkVantage Productivity Center program contains information sources and
tools designed to make computing easy and secure. It provides easy access to
various technologies, such as:
v Power Manager
v Product Recovery
v Rescue and Recovery (available on machine types 0401, 0994, and 2565)
v System Update
To access the ThinkVantage Productivity Center program, click Start → All
Programs → ThinkVantage → Productivity Center.
Lenovo Welcome
Note: The Lenovo Welcome program is only available on computers preinstalled
with the Windows 7 operating system from Lenovo.
The Lenovo Welcome program introduces some innovative built-in features of
Lenovo to you and guides you through some important setup tasks to help you
make the most of your computer.
Access Help
The Access Help information system provides information about getting started,
doing basic tasks, customizing settings for your personal preference, protecting
data, expanding and upgrading, and troubleshooting.
v To open the Access Help information system on the Windows 7 operating
system, click Start → Help and Support → Lenovo Access Help.
v To open the Access Help information system on the Windows XP operating
system, click Start → All Programs → ThinkVantage → Access Help.
After you have opened the Access Help information system, use the left panel to
make a selection from the Contents tab or the Index tab, or use the Search tab to
find a particular word or phrase.
Safety and warranty
The ThinkCentre Safety and Warranty Guide that came with your computer contains
information about safety, warranty, service and support phone numbers, CRUs,
and other notices and information resources.
Before using the information in this manual and the product it supports, be sure to
34 User Guide
Lenovo Web site (http://www.lenovo.com)
The Lenovo Web site provides up-to-date information and services to help you
buy, upgrade, and maintain your computer. You can also do the following:
v Shop for desktop and notebook computers, monitors, projectors, upgrades and
accessories for your computer, and special offers.
v Purchase additional services, such as support for hardware, operating systems,
software programs, network setup and configuration, and custom installations.
v Purchase upgrades and extended hardware repair services.
v Download the latest device drivers and software updates for your computer
model.
v Access the online manuals for your products.
v Access the Lenovo Limited Warranty.
v Access troubleshooting and support information for your computer model and
other supported products.
v Find the service and support phone numbers for your country or region.
v Find a Service Provider located near you.
Help and service
This section contains information about obtaining help and service.
Using the documentation and diagnostic programs
If you experience a problem with your computer, see Chapter 6, “Troubleshooting
and diagnostic programs,” on page 27. For information on additional resources to
help you troubleshoot your computer problem, see “Information resources” on
If you suspect a software problem, see the documentation that comes with the
operating system or software program, including readme files and online help.
Most computers come with a set of diagnostic programs that you can use to help
you identify hardware problems. For instructions on using the diagnostic
programs, see “Diagnostic programs” on page 28.
You can get the latest technical information and download device drivers and
updates from the Lenovo Support Web site at:
Calling for service
During the warranty period, you can get help and information by telephone
through the Customer Support Center.
The following services are available during the warranty period:
v Problem determination - Trained service personnel are available to assist you
with determining a hardware problem and deciding what action is necessary to
fix the problem.
v Hardware repair - If the problem is caused by hardware under warranty, trained
service personnel are available to provide the applicable level of service.
v Engineering Change management - There might be changes that are required
after a product has been sold. Lenovo or your reseller will make selected
Engineering Changes (ECs) that apply to your hardware available.
Chapter 7. Getting information, help, and service 35
The following items are not covered by the warranty:
v Replacement or use of parts not manufactured for or by Lenovo or
non-warranted Lenovo parts
v Identification of software problem sources
v Configuration of BIOS as part of an installation or upgrade
v Changes, modifications, or upgrades to device drivers
v Installation and maintenance of network operating systems (NOS)
v Installation and maintenance of application programs
Refer to the safety and warranty information that is provided with your computer
for a complete explanation of warranty terms. You must retain your proof of
purchase to obtain warranty service.
For a list of the Lenovo Support phone numbers for your country or region, go to
ThinkCentre Safety and Warranty Guide that is provided with your computer.
Note: Phone numbers are subject to change without notice. If the number for your
country or region is not provided, contact your Lenovo reseller or Lenovo
marketing representative.
If possible, be at your computer when you call. Have the following information
available:
v Machine type and model
v Serial numbers of your hardware products
v Description of the problem
v Exact wording of any error messages
v Hardware and software configuration information
Using other services
If you travel with your computer or relocate it to a country where your desktop or
notebook computer machine type is sold, your computer might be eligible for
International Warranty Service, which automatically entitles you to obtain warranty
service throughout the warranty period. Service will be performed by service
providers authorized to perform warranty service.
Service methods and procedures vary by country, and some services might not be
available in all countries. International Warranty Service is delivered through the
method of service (such as depot, carry-in, or on-site service) that is provided in
the servicing country. Service centers in certain countries might not be able to
service all models of a particular machine type. In some countries, fees and
restrictions might apply at the time of service.
To determine whether your computer is eligible for International Warranty Service
and to view a list of the countries where service is available, go to
the screen.
For technical assistance with the installation of or questions related to Service
Packs for your preinstalled Microsoft Windows product, refer to the Microsoft
you can contact the Customer Support Center. Some fees might apply.
36 User Guide
Purchasing additional services
During and after the warranty period, you can purchase additional services, such
as support for hardware, operating systems, and application programs; network
setup and configuration; upgraded or extended hardware repair services; and
custom installations. Service availability and service name might vary by country
or region. For more information about these services, go to the Lenovo Web site at:
Chapter 7. Getting information, help, and service 37
38 User Guide
Appendix. Notices
Lenovo may not offer the products, services, or features discussed in this
document in all countries. Consult your local Lenovo representative for
information on the products and services currently available in your area. Any
reference to a Lenovo product, program, or service is not intended to state or
imply that only that Lenovo product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe any
Lenovo intellectual property right may be used instead. However, it is the user’s
responsibility to evaluate and verify the operation of any other product, program,
or service.
Lenovo may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you
any license to these patents. You can send license inquiries, in writing, to:
Lenovo (United States), Inc.
1009 Think Place - Building One
Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some
jurisdictions do not allow disclaimer of express or implied warranties in certain
transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. Lenovo may make improvements
and/or changes in the product(s) and/or the program(s) described in this
publication at any time without notice.
The products described in this document are not intended for use in implantation
or other life support applications where malfunction may result in injury or death
to persons. The information contained in this document does not affect or change
Lenovo product specifications or warranties. Nothing in this document shall
operate as an express or implied license or indemnity under the intellectual
property rights of Lenovo or third parties. All information contained in this
document was obtained in specific environments and is presented as an
illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those Web
sites. The materials at those Web sites are not part of the materials for this Lenovo
product, and use of those Web sites is at your own risk.
Any performance data contained herein was determined in a controlled
environment. Therefore, the result obtained in other operating environments may
© Copyright Lenovo 2010
39
vary significantly. Some measurements may have been made on development-level
systems and there is no guarantee that these measurements will be the same on
generally available systems. Furthermore, some measurements may have been
estimated through extrapolation. Actual results may vary. Users of this document
should verify the applicable data for their specific environment.
Television output notice
The following notice applies to models that have the factory-installed
television-output feature.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
European conformance CE mark
Trademarks
Lenovo, the Lenovo logo, Rescue and Recovery, ThinkCentre, and ThinkVantage
are trademarks of Lenovo in the United States, other countries, or both.
Microsoft and Windows are trademarks of the Microsoft group of companies.
Celeron, Intel, Intel Core, and Pentium are trademarks of Intel Corporation in the
United States, other countries, or both.
Other company, product, or service names may be trademarks or service marks of
others.
40 User Guide
system
P
password
T
power supply
U
R
updating
recovering
using
recovery
reinstalling
replacing
V
S
W
security
selecting
service
services
settings
software
42 User Guide
Part Number: 89Y1200
Printed in USA
(1P) P/N: 89Y1200
|