PERSONAL CD, CD-R/RW PLAYER
with 45 SECOND JOGGABLE
ANTI-SKIP PROTECTION and
EXTENDED BATTERY LIFE
OWNER’S MANUAL
HD7097
HD7097_ib060702.p65
18
7/6/2002, 15:05
IMPORTANT NOTES
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Avoid installing the unit in locations described below:
• Places exposed to direct sunlight or • Dusty places.
loseto heat radiating appliances such • Places subject to constant
as electric heaters.
vibration.
• Humid or moist places.
CLASS 1 LASER PRODUCT
CAUTION
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
INVISIBLE LASER RADIATION
WHEN OPENAND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
This product contains a low power Laser Device.
CAUTION
THIS LASER COMPACT DISC PLAYER FUNCTIONS BY HELP OF INVISIBLE
LASER LIGHT AND IS EQUIPPED WITH SAFETY SWITCHES TO AVOID
EXPOSURE WHEN DOOR IS OPEN AND SAFETY INTERLOCKS ARE
DEFEATED. IT IS DANGEROUS TODEFEAT OR BYPASS SAFETY SWITCHES.
DANGEROUS VOLTAGE
Uninsulated Dangerous Voltage, that may be of sufficient
magnitude to constitute a risk of electric shock to persons is
present within this product's enclosure.
ATTENTION
The Owner's Manual contains important operating and
maintenance instructions.
For your safety, it is necessary to refer to the manual.
This device complies with part 15 of the FCC rules. Operation is subject to the
condition that this device does not cause harmful interference.
2
HD7097_ib060702.p65
2
7/6/2002, 15:05
LOCATION OF CONTROLS AND INDICATORS
9
10
8
7
6
11
12
13
14
5
4
3
15
16
1
1.) DBBS (Bass Boost) ON/OFF Switch - Switch On to increase bass response.
2.) VOLUME (+ / – ) Buttons – Raises or lowers the volume.
3.) PHONES (Headphone) Jack – Connect stereo headphones, included, to this
jack.
4.) LINE OUT Jack – To connect this CDplayer to an external amplifier or recording
device. Connection cable not included.
5.) STOP Button – To stop playback, and to turn the power ‘Off’.
6.) ASP (Anti-Skip Protection) Button – Turns Anti-Skip system ‘On’ or ‘Off’.
7.) PROG (Program) Button – To program tracks in the CD memory.
8.) LCD Display – Shows Track number, Playing time, Joggable status, Battery
Status, Program, Repeat, Random, and Intro modes.
9.) DC IN 4.5V Input Jack – Connect an AC adapter (not included) to this jack to
use 120V 60 Hz house current.
10.) Battery Compartment (on bottom cabinet).
11.) MODE Button – Selects the playback mode: Repeat 1/All, Random, or Intro.
12.) PLAY/PAUSE
Button – To begin playback, and to pause during playback.
13.) SKIP
Button – To skip tracks or search forward.
Button – To skip tracks or search backward.
14.) SKIP
15.) CD Door.
16.) OPEN Switch – Slide to the right to unlock and open the CD door.
3
HD7097_ib060702.p65
3
7/6/2002, 15:05
LCD DISPLAY INDICATORS
4
5
6
7
3
2
1
J-ASP
9
8
10
1.) INTRO Indicator – Appears when Intro playback mode is selected.
2.) RAND (Random) Indicator – Appears when Random playback mode is
selected.
3.) PROG (Program) Indicator – Appears when programming tracks or playing
programmed tracks.
4.) VOL (Volume) Indicator – Appears when pressing VOLUME + /– buttons.
5.) Track Number/Volume Level Display – Shows the track which is being played,
and the total tracks on the disc. Also shows the volume level (0 to 32) when
VOLUME +/– buttons are pressed.
6.) Repeat 1/ALL Indicators – Appears when the Repeat playback mode is
selected.
7.) Battery Level Indicator – Bars indicate battery level.
8.) Anti-Skip Protection Indicator – Flashing icon indicates Anti-Skip Protection
is activated.
9.) CD-RW Indicator – Lights when playing CD-RW disc.
10.) Time Display – Shows elapsed time of the track being played and total playing
time of the disc.
4
HD7097_ib060702.p65
4
7/6/2002, 15:05
POWER SOURCE
This CD player can be operated on either 120V 60Hz AC house current with an
optional AC adapter (not included) or on 3V DC (2 "AA" batteries, not included).
BATTERY OPERATION
1.) Open the battery compartment door on
the bottom cabinet by sliding it in the
direction of the arrow and then lifting it
open. To prevent loss, the door cannot
be removed from the unit.
2.) Insert 2 "AA" batteries (not included) into
the compartment. Use alkaline batteries
for longest life. Follow the polarity
markings inside the compartment. If the batteries are inserted incorrectly the
unit will not work.
NOTE:
In order to operate the player on batteries the optional AC adapter (not included)
must be disconnected from the DC IN jack.
BATTERY REPLACEMENT
When the batteries become too weak the ‘bars’ inside the battery icon
disappear. The indicator flashes and operation may become erratic. When
this occurs replace the batteries immediately.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture
(Follow battery manufacturer’s directions.)
5
HD7097_ib060702.p65
5
7/6/2002, 15:05
AC OPERATION (AC Adapter not included)
Connect the AC adapter to your 120VAC outlet. Then connect the small plug to the
"DC IN 4.5V" jack on the back of the player as shown in the following illustration.
NOTE:
This optional AC adapter, should be rated as follows:
Input :
120V / 60Hz AC.
Output : 4.5V DC 500mA.
The adapter must have a female-type plug with a positive center:
Negative (–)
Positive (+)
• Be sure the adapter is UL listed. If you use a “Universal”-type adapter, be sure to
set the output selector to “DC 4.5V”.
• If the AC adapter will not be used for an extended period of time, remove it from
the wall outlet by pulling on the adapter housing. Do not remove the adapter by
pulling on the cord. Do not touch the AC adapter with wet hands.
6
HD7097_ib060702.p65
6
7/6/2002, 15:05
OPERATING INSTRUCTIONS
NORMAL PLAYBACK
1.) Connect the headphones to the PHONES jack.
Set the VOLUME control to a low level before
you begin playback and then adjust the volume
to a comfortable level after playback begins.
To PHONES Jack
2.) Slide the CD Door OPEN switch to the right to
release the lock and open the CDDoor.
3.) Place your disc on the center spindle with the
printed label side facing up. Press down gently
near the center hole to make sure the disc is
properly seated on the spindle.
4.) Close the door completely until it locks shut.
5.) Press the PLAY/PAUSE
button to begin
playback on Track 1. Joggable indicator flashes
and the playing time shows in the display.
J-ASP
6.) Adjust the VOLUME and DBBS (Bass Boost)
controls as desired.
PLAY/PAUSE
7.) When all tracks have been played the player stops
and the display shows the total tracks and playing
time on the disc. After approximately 1 minute the
power shuts off and the display goes blank.
To stop playback before the disc ends press the
STOP button at any time. Press the STOP
button again to shut the power off immediately.
DBBS
ON
OFF
VOLUME
STOP
8.) Slide the CD Door OPEN switch to the right to
open the door and remove your disc. Close the
CD Door and return your disc to its protective
storage case.
OPEN
7
HD7097_ib060702.p65
7
7/6/2002, 15:05
AUTO-RESUME PLAYBACK
This feature allows you to stop playback completely at any point on the disc and
then resume playback at the beginning of that same track automatically, as long as
the same disc remains in the player and power is not disconnected.
Press the STOP
button to stop playback at any point on the disc, but do not
remove the disc from the player or open the CD Door. The display will show the
total tracks and playing time on the disc. Press the STOP button again to shut
the power 'Off' or wait one minute and the power shuts off automatically and the
display goes blank, but the player remembers the number of the last track that was
played.
Press the PLAY/PAUSE
button. Playback will resume at the beginning of the
last track that was playing before the disc was stopped.
To cancel the Auto-Resume function, open the CD door and then close it again
while power is still ‘On’.
PAUSE CONTROL
Press the PLAY/PAUSE
button during playback
to pause momentarily. The sound stops, the track and
the time display flashes but the disc continues to spin.
Press the PLAY/PAUSE
button again to cancel
pause and resume playback. The sound returns and
the display stops flashing.
SKIP/SEARCH CONTROLS
To skip forward or reverse to another track during
playback press the SKIP
or SKIP
buttons
repeatedly until the desired track number appears in
the display. Playback will begin on the desired track.
To search forward or backward within a track to locate a specific musical passage
press and hold either the SKIP
or SKIP
buttons. The player moves forward
or reverse at high speed. When you reach the desired point in the track, release
the buttons and normal playback resumes.
8
HD7097_ib060702.p65
8
7/6/2002, 15:05
REPEAT PLAYBACK
To repeat a single track:
3
1
1.) Press PLAY/PAUSE
button to begin playback.
2
2.) When playback begins press SKIP
button to select the desired track.
or SKIP
3.) Press the MODE button once until the Repeat 1
” indicator appears in the display. The
“
selected track will be repeated indefinitely.
To repeat the entire disc:
1.) Press PLAY/PAUSE
button to begin playback.
2.) When playback begins press the MODE button
twice until the Repeat All “
” indicator
appears in the display. The entire disc will be
repeated indefinitely.
To cancel repeat playback:
1.) Press the STOP button, or;
2.) Press the MODE button until no special mode indicators appear in the display.
9
HD7097_ib060702.p65
9
7/6/2002, 15:05
INTRO SCAN
This feature plays only the first 10 seconds of each track on the disc.
1.) Press PLAY/PAUSE
button to begin playback.
2.) When playback begins press the MODE button
3 times.The “INTRO” indicator flashes in the display.
J-ASP
3.) Press the STOP button to stop the disc and then
press the PLAY/PAUSE
button again. The
“INTRO” indicator stops flashing and remains ‘On’.
The player returns to the beginning of track 1 and
plays just the first 10 seconds of each track on the
disc. When the first 10 seconds of each track has
been played, the player stops.
J-ASP
To cancel Intro Scan press the STOP
button or press the MODE button until
none of the special playback mode indicators appear in the display.
RANDOM PLAYBACK
Use Random playback to play all the tracks on a disc in a random order selected
by the CD player.
1.) Press PLAY/PAUSE
button to begin playback.
2.) When playback begins press the MODE button
4 times until the “RAND” indicator flashes in the
display.
J-ASP
3.) Press the STOP
button to stop the disc and then
button again. The “RAND”
press the PLAY/PAUSE
indicator stop flashing and remains on. The player
randomly selects the first track for playback and
continues randomly selecting tracks until every track
on the disc has been played once. After all tracks have
been played the player stops.
J-ASP
To cancel Random playback, press the STOP button, or press the MODE button
until no special mode indicators remain in the display.
10
HD7097_ib060702.p65
10
7/6/2002, 15:05
PROGRAMMED PLAYBACK
You can program the player to play only the tracks that you want to hear, in the
specific order that you want to hear them. Up to a total of 24 tracks can be
programmed. You may program certain tracks to play more than once if desired.
IMPORTANT: The player can only be programmed when it is in the Stop mode
and the total number of tracks and playing time appear on the display. If the display
is blank press the PLAY/PAUSE
button to start the disc. When playback begins
press the STOP button. If the disc was playing, press the STOP
that the total tracks and playing time appear on the display.
button so
1.) While the total tracks and playing time appear on the
display press the PROG (Program) button. "PROG"
indicator and Program No. "P - 01" appear. The track
indicator flashes.
2.) Press SKIP
or SKIP
button until the first track
to be programmed appears in the display.
Example: Track # 7.
3.) Press the PROG (Program) button again to enter the
selected track in the memory. The flashing track
indicator returns to a "00" and the Program No.
advances to "P - 02".
4.) Repeat Steps 2 and 3 until you have entered up to a total of 24 tracks in the
memory.
5.) Press the PLAY/PAUSE
button to begin
programmed playback. The “PROG” indicator remains
in the display. The player will play the tracks you
selected in the programmed order. When the last track
has played the player stops and the total tracks and
playing time appear.
J-ASP
6.) To cancel programmed playback, press and hold the PROG button at Stop
mode, until the “PROG” indicator disappears.
11
HD7097_ib060702.p65
11
7/6/2002, 15:05
“JOGGABLE” ELECTRONIC ANTI-SKIP PROTECTION
This CD player is equipped with an automatic “Joggable” 45 second Electronic
Anti-Skip Memory and an Anti-Rolling Mechanism that will eliminate virtually all
skipping under normal conditions. The joggable anti-skip circuitry provides a much
faster recovery time than previous anti-skip systems. The recovery time is shorter
than the time between steps for the average jogger. This means that you can carry
this unit while you are jogging and still enjoy skip free music. When you press the
PLAY/PAUSE
button to begin playback the player immediately begins to store
45 seconds of music in a solid state memory that is impervious to shock. The
player is always reading the disc 45 seconds ahead of the music you are hearing
and storing that information in the memory. If the player is subjected to shock or
bumps of less than 45 seconds duration you will not notice them at all. If the bumps
last longer than 45 seconds the anti-skip memory may be depleted and the player
may skip or stop.
When playback begins the Joggable Anti-Skip indicator begins
to flash rapidly in the display. When the Anti-Skip memory
contains 45 seconds of music and is “full”, the indicator flashes
J-ASP
slowly. If the player is bumped or shaken the indicator again
flashes rapidly. The player mayskip if the bumps continue. When
the bumps stop the memory starts to fill up again and the flashing indicator will
slow down.
The Joggable Anti Skip System does use additional battery power. Therefore if
you are using this player in a stable location where it will not be subject to bumps
and shocks, press the ASP button to switch the anti-skip circuitry‘Off’. The “joggable”
indicator will disappear. This will reduce battery drain and prolong battery life.
Note: Each time you begin playing a disc the joggable anti-skip system will turn
‘On’ automatically.
12
HD7097_ib060702.p65
12
7/6/2002, 15:05
CONNECTION TO AN EXTERNAL AUDIO SYSTEM
You can connect this CDplayer to a home stereo system, receiver, amplifier,
or recorder if desired. Connect the LINE OUT jack of this CD player to the
Left/Right Auxiliary Inputs, Line Inputs, or Record Inputs of the external
device. The connection cable is NOT included. Set the DBBS(Bass Boost)
switch of this CD player to the “OFF” position. Be sure to follow the external
source connection instructions for the other equipment as well.
13
HD7097_ib060702.p65
13
7/6/2002, 15:05
CARE AND MAINTENANCE
CLEANING THE CABINET
Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak
solution of neutral detergent and water, and then wipe clean.
CLEANING THE LENS
A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not
work. Open the disc cover and clean the lens as follows:
DUST OR DRY PARTICLES
Using a camera lens brush/blower, blow on the lens
several times, then wipe it lightlywith the brush to remove
dust. Then, blow on the lens once more.
FINGERPRINTS
To remove fingerprints from the lens, use a cotton swab
starting in the middle and working to the outside edge.
Use only very light pressure on the lens to avoid forcing it
out of alignment.
CLEANING THE DISC
When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the
center out.
NOTE:
Do not use solvents such as benzine, thinner, commercially available cleaners or
anti-static spray intended for analog discs.
14
HD7097_ib060702.p65
14
7/6/2002, 15:05
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before calling for
service.
SYMPTOM
CAUSE
SOLUTION
Unit will not turn on. Weak or dead
batteries.
Replace batteries.
CD compartment not
closed.
Disc inserted incorrectly. Reinsert disc correctly.
Dirty or defective disc. Try another disc.
Moisture or condensation Disc: wipe with soft cloth.
Close CD compartment.
Disc will not play.
on disc or lens.
Lens: see page 14.
‘Care and Maintenance’
Reinsert headphone plug
correctly.
No sound from
headphones.
Headphone plug not
inserted correctly.
VOLUME controls set to
minimum.
Raise volume controls on
main unit and/or headphone
cable.
Weak batteries.
Replace batteries.
Try another disc.
Defective disc.
Erratic playback.
Dirty or defective disc.
Clean or replace disc.
SERVICE
FOR ADDITIONAL SET-UP OR OPERATINGASSISTANCE
PLEASE CALL:
1-800-898-9020
FOR CUSTOMER SERVICE, PLEASE WRITE TO:
Emerson Radio Corp.
Consumer Affairs Dept.
1901 Diplomat Drive,
Farmers Branch, TX 75234.
15
HD7097_ib060702.p65
15
7/6/2002, 15:05
EMERSON RADIO CORP.
LIMITED WARRANTY
What does this warranty cover ? Any manufacturing defects in original material, including original parts and
workmanship, under normal use and conditions.
For how long? For a period of ninety (90) days from the date of original purchase in the U.S.
What will we do ? If you need service under this Warranty, and you provide us with the dated proof of
purchase, we will provide repair service at no charge for labor and parts at an authorized Depot Repair Facility,
or replace the product in our discretion.
How do you make your warranty claim ? If it becomes necessary to repair your unit, you can obtain the name
and mailing location of a Depot Repair Facility by dialing 1-800-695-0098. You should pack your unit in a well-
padded heavy corrugated box, enclose your check or money order payable to the Depot Repair Facility in the
amount of $9.00 to cover the return shipping and handling costs, and enclose a copy of your proof of purchase
(warranty service will not be provided without a dated proof of purchase). Finally, you should ship the unit
prepaid via UPS or parcel post (insured).
What does your warranty not cover ? Your warranty does not cover the following :
•
•
•
•
•
•
•
•
•
•
•
Damage from negligence, misuse, abuse, accident, or failure to follow operating instructions.
Use of product in a commercial application or rentals.
Changes or repairs by anyone other than an authorized Depot Repair Facility.
Damage because your unit is improperly connected to the equipment of other manufacturers.
Unit on which the serial number has been defaced, modified or removed.
Damage to equipment not properly connected to the product.
Cost incurred in shipping your unit to and from an authorized Depot Repair Facility.
Ordinary adjustments which you can perform as outlined in the owner’s manual.
Signal reception problems caused by external antenna or cable systems.
Products purchased, used, serviced, or damaged outside of the United States.
Damage to compact discs or cassettes.
What other limitations apply to your warranty ?
THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER
ANDDOESNOT EXTENDTO SUBSEQUENT OWNERS OF THE PRODUCT. THIS WARRANTY IS VALID
ONLY INTHE UNITEDSTATES OFAMERICA.ANYAPPLICABLE IMPLIEDWARRANTIES, INCLUDING
THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD OF THE
EXPRESSED WARRANTY AS PROVIDED ABOVE BEGINNING WITH THE DATE OF ORIGINAL
PURCHASE AT RETAILANDNO WARRANTIES, WHETHER EXPRESSED OR IMPLIED, SHALLAPPLY
TO THE PRODUCT THEREAFTER. WE MAKE NO WARRANTYAS TO THE FITNESS OF THE PRODUCT
FOR ANY PARTICULAR PURPOSE OR USE.
THE EXTENT OF OUR LIABILITY UNDER THIS LIMITED WARRANTY IS THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND IN NO EVENT WILL OUR LIABILITY EXCEED THE
PURCHASE PRICE PAID BY THE PURCHASER OF THE PRODUCT. UNDER NO CIRCUMSTANCES
WILL WE BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT, INCIDENTAL, SPECIAL, OR
CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS
PRODUCT.
How does state law apply to your warranty ?
THIS WARRANTYGIVESYOU SPECIFIC LEGAL RIGHTS, BUTYOU MAYALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW LIMITATIONS ON IMPLIED
WARRANTIES OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGE,
SO THESE RESTRICTIONS MAY NOT APPLY TO YOU.
AU898F
16
HD7097_ib060702.p65
16
7/6/2002, 15:05
EMERSON RADIO CORP.
EMERSON
PART NO. :16-2868
206-01
PRINTED IN CHINA
HD7097_ib060702.p65
17
7/6/2002, 15:05
|