ViewSonic Camcorder VP3D1 User Manual

VP3D1  
3D Video Processor  
User Guide  
IMPORTANT: Please read this User Guide to obtain important information on installing  
and using your product in a safe manner, as well as registering your product for future  
service. Warranty information contained in this User Guide will describe your limited  
viewsonic.com in English, or in specific languages using the Regional selection box in  
the upper right corner of our website. “Antes de operar su equipo lea cu idadosamente  
las instrucciones en este manual”  
 
Important Safety Instructions  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this unit near water.  
Clean with a soft, dry cloth.  
Do not block any ventilation openings. Install the unit in accordance with the  
manufacturer’s instructions.  
8.  
9.  
Do not install near any heat sources such as radiators, heat registers, stoves, or  
other devices (including amplifiers) that produce heat.  
Do not defeat the safety purpose of the polarized or grounding-type plug. A  
polarized plug has two blades with one wider than the other. A grounding type plug  
has two blades and a third grounding prong. The wide blade and the third prong are  
provided for your safety. If the provided plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet.  
10.  
Protect the power cord from being walked on or pinched particularly at plugs.  
Convenience receptacles and the point where they exit from the unit. Be sure that  
the power outlet is located near the unit so that it is easily accessible.  
Only use attachments/accessories specified by the manufacturer.  
Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the unit. When a cart is used, use caution  
when moving the cart/unit combination to avoid injury from tipping over.  
Unplug this unit when unused for long periods of time.  
Refer all servicing to qualified service personnel. Servicing is required  
when the unit has been damaged in any way, such as: if the power-supply cord  
or plug is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is  
exposed to rain or moisture, or if the unit does not operate normally or has been  
dropped.  
11.  
12.  
13.  
14.  
 
ii  
Declaration of RoHS Compliance  
This product has been designed and manufactured in compliance with Directive 2002/95/  
EC of the European Parliament and the Council on restriction of the use of certain  
hazardous substances in electrical and electronic equipment (RoHS Directive) and is  
deemed to comply with the maximum concentration values issued by the European  
Technical Adaptation Committee (TAC) as shown below:  
Proposed Maximum Con-  
centration  
Substance  
Actual Concentration  
Lead (Pb)  
0,1%  
< 0,1%  
< 0,1%  
< 0,01%  
< 0,1%  
Mercury (Hg)  
0,1%  
Cadmium (Cd)  
0,01%  
0,1%  
Hexavalent Chromium (Cr6+)  
Polybrominated biphenyls  
(PBB)  
0,1%  
0,1%  
< 0,1%  
< 0,1%  
Polybrominated diphenyl ethers  
(PBDE)  
Certain components of products as stated above are exempted under the Annex of the  
RoHS Directives as noted below:  
Examples of exempted components are:  
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps  
not specifically mentioned in the Annex of RoHS Directive.  
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and  
electronic ceramic parts (e.g. piezoelectronic devices).  
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight  
or more lead).  
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium  
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by  
weight.  
 
iii  
Copyright Information  
Copyright © ViewSonic® Corporation, 2011. All rights reserved.  
ViewSonic®, the three birds logo, On View®, ViewMatch, and ViewMeter® are registered  
trademarks of ViewSonic® Corporation.  
Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or  
omissions contained herein; nor for incidental or consequential damages resulting from  
furnishing this material, or the performance or use of this product.  
In the interest of continuing product improvement, ViewSonic® Corporation reserves the  
right to change product specifications without notice. Information in this document may  
change without notice.  
No part of this document may be copied, reproduced, or transmitted by any means, for any  
purpose without prior written permission from ViewSonic® Corporation.  
Product Registration  
To meet your future needs, and to receive any additional product information as it becomes  
For Your Records  
Product Name:  
VP3D1  
ViewSonic 3D Video Processor  
VS13964  
VP3D1_UG_ENG Rev. 1A 01-27-11  
Model Number:  
Document Number:  
Serial Number:  
Purchase Date:  
Product disposal at end of product life  
ViewSonic respects the environment and is committed to working and living green. Thank  
you for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn  
more.  
 
iv  
CONTENTS  
Introduction ........................................................................2  
Features ......................................................................................................................2  
Package Contents .......................................................................................................2  
Product Overview ...............................................................3  
Front View ...................................................................................................................3  
Rear View ...................................................................................................................3  
LED Indicators ....................................................................4  
Connection .........................................................................4  
Connecting Video source devices ...............................................................................5  
Using the 3D Video Processor ..........................................6  
PlayStation® 3 Games ................................................................................................6  
3D Blu-rayTM Player ...................................................................................................6  
3D TV (e.g. SKY 3D) ...................................................................................................6  
3D Device (e.g. 3D DV/DC) with 2D 1080i side by side signal output ........................6  
Operation ....................................................................................................................7  
Specifications .....................................................................8  
Timing chart ........................................................................8  
Supported timing for 3D video input ............................................................................8  
Computer Compatibility ...............................................................................................8  
Troubleshooting .................................................................9  
 
1
Introduction  
Features  
Convert 3D video from several popular formats for display on DLP-Link 3D ready  
projectors.  
TM  
Automatically identify 3D input signal from 3D Blu-ray Disc Player and convert  
it to 720p 120Hz.  
Compatible with HDMI 1.4a 3D formats including side-by-side, etc.  
Pass 2D images unaltered for normal display  
Manually convert side-by-side 3D signal by pressing SBS Mode button.  
Environmental conditions:  
Temperature:  
Operating: 5°C ~ 35°C (41°F ~ 104°F)  
Non-operating: -20°C ~ 60°C (-4°F ~ 140°F)  
Altitude:  
Operating: Sea level to 16,000 feet  
Non-operating: Sea Level to 30,000 feet  
Package Contents  
3D Video Processor  
Power plug and power adapter  
HDMI cable  
ViewSonic CD Wizard  
Quick Start Guide  
 
2
Product Overview  
Front View  
1
2
3
4
SBS (Side-By-Side) Mode  
button  
HDMI 1 button  
POWER button  
3
4
1
HDMI 2 button  
2
Rear View  
5
6
7
8
DC power input  
HDMI in 1 / HDMI in 2  
HDMI out (to projector)  
7
8
5
Service  
6
 
3
LED Indicators  
Power LED is red.  
SBS MODE LED is blue when this feature is selected.  
HDMI 1LED is blue when this input source is selected and detected.  
HDMI 2 LED is blue when this input source is selected and detected.  
Power LED  
(Red)  
SBS MODE  
(Blue)  
HDMI 1  
(Blue)  
HDMI 2  
(Blue)  
Status  
Standby state  
(Input power cord)  
HDMI 1 input source  
(Default)  
HDMI 2 input source  
HDMI 1 input source &  
SBS mode enable  
Power on & HDMI 2  
input source & SBS  
mode enable  
Off  
Off  
Off  
Off  
Steady light  
Steady light  
Steady light  
Off  
Off  
Steady light  
Off  
Off  
Steady light  
Off  
Steady light  
Steady light  
Steady light  
Steady light  
Off  
Steady light  
Connection  
Connecting the AC adapter  
1
2
AC adapter  
Power cord  
1
2
 
4
Connecting Video source devices  
Sky+HD, Cable / Satellite box  
VP3D1 3D Video Processor  
3D Capable DLP Projector  
PlayStation  
3
3D Blu-ray™ Player  
3D Glasses  
 
5
Using the 3D Video Processor  
Once you have connected your devices together with HDMI cables, as shown in the  
diagram, you are ready to begin. Power ON your 3D video source, 3D Video  
Processor and your 3D projector.(*)  
Note *: The 3D video source device must be powered on before the 3D Video  
Processor.  
PlayStation® 3 Games  
1.  
Make sure that you have updated your console to the latest software version in  
PlayStation® 3.  
2.  
Go to the "Settings menu Display settings Video output HDMI".  
TM  
3D Blu-ray Player  
TM  
1.  
Make sure that your player can support 3D Blu-ray disc and that 3D output is  
enabled.  
Insert the 3D Blu-ray disc into the player, press "Play".  
TM  
2.  
3D TV (e.g. SKY 3D)  
1.  
2.  
3.  
Contact your TV service provider to enable any 3D channels on your channel  
package.  
Once enabled, switch to the 3D channel. - You should see two images side-by-  
side.  
Press the "SBS Mode" button on the front of the 3D Video Processor.(*)  
Note *: If input video is normal 2D, please press SBS mode to "Off".  
3D Device (e.g. 3D DV/DC) with 2D 1080i side by side  
signal output  
1.  
Connect your 3D device and switch to out 3D content with 2D side-by-side output  
to 3D Video Processor. You should see two images side-by-side.  
Press the "SBS Mode" button on the front of the 3D Video Processor.  
When you see "3D" in the top right hand corner of the screen, enable your  
projector's 3D mode, turn on your 3D glasses and put them on.  
If necessary, use your projector's 3D Sync-Invert option to optimize your 3D  
experience. The option is located in the "Display" section of the projector OSD  
menu.  
2.  
3.  
4.  
Note: If input video is normal 2D, please press SBS mode to "Off". If SBS mode is  
active, 2D video content will not display correctly.  
 
6
Operation  
TM  
1.  
2.  
3.  
4.  
Connect your VP3D1 3D Video Processor to a 3D Blu-ray Player using a HDMI  
cable.  
Connect your VP3D1 3D Video Processor to a 3D Ready DLP® projector using  
another HDMI cable.  
Turn on your sources (3D Blu-ray Player, VP3D1 3D Video Processor and 3D  
TM  
Ready DLP® projector).  
Press the “PLAY” button on the player.  
3D Blu-rayPlayer  
5.  
6.  
Make sure the power of the 3D glasses is on.  
Wear the 3D glasses, and then enjoy your 3D experience!  
HDMl-lN  
HDMl-OUT  
3D Ready DLP Projector  
(with HDMI connection)  
3D Blu-rayPlayer  
HDMl-OUT  
HDMl-lN  
VP3D1 3D Video Processor  
 
7
Specifications  
Native 3D output resolution  
Maximum output resolution  
Inputs  
HD Ready 720p120Hz  
Full HD 1080P  
2x HDMI 1.4a (HDCP) - audio supported  
USB type A for firmware update  
1x HDMI 1.3 (HDCP) - audio supported  
PAL SECAM 576i/p, NTSC 480i/p, HD 720p/1080i/1080p  
AC 100-240 V, 50 - 60 Hz, 3.0A  
10W (<1W standby)  
Outputs  
2D video compatibility  
Power supply (AC adapter)  
Power consumption  
Dimension (W x D x H)  
Weight  
430 x 210 x 36 mm  
1.3kg ( 2.9lb)  
Note: Design and Specifications are subject to change without prior notice.  
Timing chart  
Supported timing for 3D video input  
Resolution  
(H x V )  
VerticalFrequency  
Signal mode  
3D format type  
(Hz)  
50Hz  
50Hz  
60Hz  
60Hz  
60Hz  
50Hz  
24Hz  
24Hz  
720p  
720p  
720p  
1280 x 720  
1280 x 720  
1280 x 720  
1280 x 720  
1920 x 1080  
1920 x 1080  
1920 x 1080  
1920 x 1080  
Frame packing  
Top-and-Bottom  
Frame packing  
Top-and-Bottom  
Side-by-Side (Half)  
Side-by-Side (Half)  
Frame packing  
720p  
1080i  
1080i  
1080p  
1080p  
Top-and-Bottom  
Computer Compatibility  
Computer Input Resolutions  
640 x 480 @ 60Hz  
Computer Output Resolutions  
640 x 480 @ 60Hz  
800 x 600 @ 60Hz  
1024 x 768 @ 60Hz  
1280 x 720 @ 60Hz  
1280 x 800 @ 60Hz  
1280 x 1024 @ 60Hz  
1400 x 1050 @ 60Hz  
1440 x 900 @ 60Hz  
1680 x 1050 @ 60Hz  
1600 x 1200 @ 60Hz  
1920 x 1080 @ 60Hz  
800 x 600 @ 60Hz  
1024 x 768 @ 60Hz  
1280 x 720 @ 60Hz  
1280 x 800 @ 60Hz  
1280 x 1024 @ 60Hz  
1400 x 1050 @ 60Hz  
1440 x 900 @ 60Hz  
1680 x 1050 @ 60Hz  
1600 x 1200 @ 60Hz  
1920 x 1080 @ 60Hz  
 
8
Troubleshooting  
No image appears on screen.  
1.  
Ensure all the cables and power connections are correctly and securely  
connected as described in the "Connection" section.  
Ensure all the pins of connectors are not bent or broken.  
Make sure you have powered on all the devices.  
Blurry double image.  
2.  
3.  
1.  
Press "SBS Mode" button to "Off" to avoid normal 2D image is blurry double  
image.  
2.  
3.  
Two images, side-by-side format.  
Press "SBS Mode" button to "On" for input signal is HDMI 1.3 2D 1080i side-by-  
side.  
Pseudo-3D Image or uncomfortable depth of field inside the image.  
1.  
Use you projector's "3D Sync. Invert" option.  
Image does not display in 3D.  
1.  
Check if the battery of 3D glasses is drained.  
 
9
Customer Support  
For technical support or product service, see the table below or contact your reseller.  
NOTE: You will need the product serial number.  
T = Telephone  
F = FAX  
Country/Region  
Website  
Email  
AUS= 1800 880 818  
NZ= 0800 008 822  
Australia/New Zealand www.viewsonic.com.au  
T (Toll-Free)= 1-866-463-4775  
T (Toll)= 1-424-233-2533  
F= 1-909-468-3757  
Canada  
Europe  
Hong Kong  
India  
T= 852 3102 2900  
T= 1800 11 9999  
support/call-desk/  
Ireland (Eire)  
Korea  
T= 080 333 2131  
T= 0800-4441185  
T= 1230-020-7975  
T= 01800-9-157235  
T= 001-8882328722  
Latin America  
(Argentina)  
Latin America (Chile)  
Latin America  
(Columbia)  
Latin America (Mexico) www.viewsonic.com/la/  
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS  
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16  
Latin America (Peru)  
Macau  
ap.viewsonic.com/me/  
T= 0800-54565  
T= 853 2870 0303  
Contact your reseller  
Middle East  
T= 1-800-688-6688 (English)  
T= 1-866-379-1304 (Spanish)  
F= 1-909-468-3757  
Puerto Rico & Virgin  
Islands  
Singapore/Malaysia/  
Thailand  
ap.viewsonic.com/za/  
T= 65 6461 6044  
South Africa  
Contact your reseller  
support/call-desk/  
United Kingdom  
T (Toll-Free)= 1-800-688-6688  
T (Toll)= 1-424-233-2530  
F= 1-909-468-3757  
United States  
 
10  
Limited Warranty  
VIEWSONIC® 3D Video Processor  
What the warranty covers:  
ViewSonic warrants its products to be free from defects in material and workmanship,  
under normal use, during the warranty period. If a product proves to be defective in  
material or workmanship during the warranty period, ViewSonic will, at its sole option,  
repair or replace the product with a like product. Replacement product or parts may include  
remanufactured or refurbished parts or components.  
How long the warranty is effective:  
ViewSonic 3D Video Processor are warranted for 1 year for all parts excluding the light  
source and 1 year for labor from the date of the first customer purchase.  
Who the warranty protects:  
This warranty is valid only for the first consumer purchaser.  
What the warranty does not cover:  
1. Any product on which the serial number has been defaced, modified or removed.  
2. Damage, deterioration or malfunction resulting from:  
a.Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized  
product modification, or failure to follow instructions supplied with the product.  
b. Any damage of the product due to shipment.  
c. Removal or installation of the product.  
d. Causes external to the product, such as electrical power fluctuations or failure.  
e. Use of supplies or parts not meeting ViewSonic’s specifications.  
f. Normal wear and tear.  
g. Any other cause which does not relate to a product defect.  
3. Any product exhibiting a condition commonly known as “image burn-in” which results  
when a static image is displayed on the product for an extended period of time.  
4. Removal, installation, one way transportation, insurance, and set-up service charges.  
How to get service:  
1. For information about receiving service under warranty, contact ViewSonic Customer  
Support (Please refer to Customer Support page). You will need to provide your  
product’s serial number.  
2. To obtain warranty service, you will be required to provide (a) the original dated sales  
slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial  
number of the product.  
3. Take or ship the product freight prepaid in the original container to an authorized  
ViewSonic service center or ViewSonic.  
4. For additional information or the name of the nearest ViewSonic service center, contact  
ViewSonic.  
 
11  
Limitation of implied warranties:  
There are no warranties, express or implied, which extend beyond the description  
contained herein including the implied warranty of merchantability and fitness for a  
particular purpose.  
Exclusion of damages:  
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic  
shall not be liable for:  
1.  
Damage to other property caused by any defects in the product, damages based  
upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of  
business opportunity, loss of goodwill, interference with business relationships, or  
other commercial loss, even if advised of the possibility of such damages.  
2. Any other damages, whether incidental, consequential or otherwise.  
3. Any claim against the customer by any other party.  
4. Repair or attempted repair by anyone not authorized by ViewSonic.  
Effect of state law:  
This warranty gives you specific legal rights, and you may also have other rights which vary  
from state to state. Some states do not allow limitations on implied warranties and/or do not  
allow the exclusion of incidental or consequential damages, so the above limitations and  
exclusions may not apply to you.  
Sales outside the U.S.A. and Canada:  
For warranty information and service on ViewSonic products sold outside of the U.S.A. and  
Canada, contact ViewSonic or your local ViewSonic dealer.  
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan  
Excluded) is subject to the terms and conditions of the Maintenance Guarantee Card.  
For users in Europe and Russia, full details of warranty provided can be found in www.  
viewsoniceurope.com under Support/Warranty Information.  
4.3: ViewSonic 3D Video Processor  
3DVP_LW01 Rev. 1a 02-11-09  
 
12  
 

Taylor Frozen Dessert Maker soft serve freezer User Manual
Techno Source Handheld Game System 3000 User Manual
Texas Instruments Projector DU9000 User Manual
THB Bury GPS Receiver CC 9040 User Manual
TOA Electronics Film Camera C CC714 NT User Manual
Toshiba MP3 Player D VR4 User Manual
Vermont Casting Indoor Fireplace DV36 39 User Manual
Vivotek Security Camera IP8336W User Manual
VTech Video Games 91 009633 007 US User Manual
Weber Charcoal Grill 86050 User Manual