14-1180.fm Page 1 Thursday, July 1, 1999 4:34 PM
Cat. No. 14-1180
OWNER’S MANUAL
Please read before using this equipment.
MICRO-32
Microcassette Tape
Recorder with Voice
Activation and Counter
14-1180.fm Page 3 Thursday, July 1, 1999 4:34 PM
CONTENTS
Power Sources ..................................................... 4
Installing Batteries .......................................... 4
Using AC Power ............................................. 5
Using Vehicle Battery Power .......................... 7
Operation .............................................................. 9
Loading a Cassette Tape ................................ 9
Recording ..................................................... 10
Normal Recording .................................. 11
Voice Activated Recording .................... 13
Recording with an External
Microphone ........................................... 15
Quick Record ........................................ 15
Playing a Tape .............................................. 15
Using Fast-F/Cue and Rew/Review ............. 16
Digital Tape Counter ..................................... 17
Using an Earphone ....................................... 18
Listening Safely ..................................... 18
Tape Hints ........................................................... 19
Storing Cassette Tapes ................................ 19
Preventing Accidental Erasure ..................... 19
Erasing a Cassette Tape .............................. 20
Restoring Tape Tension
and Sound Quality ........................................ 20
Maintenance ....................................................... 21
Cleaning the Tape-Handling Parts ................ 22
Specifications .................................................... 23
3
14-1180.fm Page 4 Thursday, July 1, 1999 4:34 PM
POWER SOURCES
You can power the recorder from any of the following
sources:
• Two AA batteries
• AC power (using an AC adapter)
• Vehicle battery power (using a DC adapter)
INSTALLING BATTERIES
You can use two AA batteries (not supplied) to power
the recorder. For the best performance, we recom-
mend alkaline batteries, such as RadioShack Cat.
No. 23-552. You can also use two AA nickel-cadmium
batteries, such as Cat. No. 23-125, and recharge
them with a nickel-cadmium charger, such as Cat.
No. 23-133.
Follow these steps to install batteries.
1. Remove the battery compartment cover by slid-
ing it in the direction of the arrow.
2. Insert the batteries in the battery compartment,
+
–
)
as indicated by the polarity symbols ( and
inside the compartment.
Illustration
3. Replace the cover.
4
14-1180.fm Page 5 Thursday, July 1, 1999 4:34 PM
Cautions:
• Use only fresh batteries of the required size and
type.
• Remove the batteries if the recorder will not be
used for a few weeks or more. Batteries can leak
chemicals and damage the recorder.
Replace the batteries if the REC/BATT indicator dims
or does not light.
USING AC POWER
You can use an AC adapter, such as Cat. No. 273-
1654A, to power the recorder from standard AC pow-
er.
Caution: You must use an adapter that supplies 3
volts with the center tip set to positive, delivers the
300 milliamps the recorder draws, and has a plug that
correctly fits the recorder’s DC 3V jack. The recom-
mended adapter meets these requirements. Using an
adapter that does not meet these specifications could
seriously damage the recorder or the adapter.
5
14-1180.fm Page 6 Thursday, July 1, 1999 4:34 PM
Follow these steps to power the recorder from AC
power.
1. Set the adapter’s voltage switch to 3V.
2. Insert the orange-tipped adapter plug into the
adapter’s socket. Line up TIP on the socket with
+ (positive) on the plug.
3. Insert the adapter’s barrel plug into the
recorder’s DC 3V jack.
Illustration
4. Insert the adapter’s other plug into a standard
AC outlet.
Illustration
6
14-1180.fm Page 7 Thursday, July 1, 1999 4:34 PM
USING VEHICLE BATTERY
POWER
Using a DC adapter, such as Cat. No. 270-1560A,
you can power the recorder from your vehicle’s bat-
tery.
Cautions:
• You must use an adapter that supplies 3 volts
with the center tip set to positive, delivers the
300 milliamps the recorder draws, and has a
plug that correctly fits the recorder’s DC 3V jack.
The recommended adapter meets these require-
ments. Using an adapter that does not meet
these specifications could damage the recorder
or the adapter.
• Always plug the adapter into the recorder before
plugging it into the cigarette-lighter socket.
Always unplug the adapter from the cigarette-
lighter socket before unplugging it from the
recorder.
7
14-1180.fm Page 8 Thursday, July 1, 1999 4:34 PM
Follow these steps to power the recorder from your
vehicle’s battery.
1. Set the adapter’s voltage switch to 3V.
2. Insert the orange-tipped adapter plug into the
adapter’s socket. Line up TIP on the socket with
+ (positive) on the plug.
3. Insert the adapter’s barrel plug into the
recorder’s DC 3V jack.
Illustration
4. Insert the adapter’s large plug into the vehicle’s
cigarette-lighter socket.
Illustration
8
14-1180.fm Page 9 Thursday, July 1, 1999 4:34 PM
OPERATION
Caution:
The tape stops and the recorder turns off
when the tape reaches the end. However, we recom-
STOP/EJ
mend that you press
as soon as possible af-
ter you finish playing or recording a tape. This
protects the tape by releasing it from the tape-han-
dling parts.
LOADING A CASSETTE TAPE
Note:
We recommend MC-60 cassette tapes (Cat.
No. 44-640) for up to two hours of recording/playback
time, or MC-90 cassette tapes (Cat. No. 44-644) for
up to three hours of recording/playback time.
Follow these steps to load a cassette tape.
1. Use a pencil to turn the cassette’s hub and
remove any tape slack. Avoid touching the tape.
Illustration
STOP/EJ
2. Press
ment.
to open the cassette compart-
Illustration
9
14-1180.fm Page 10 Thursday, July 1, 1999 4:34 PM
3. Slide the cassette into the grooves on the inside
of the compartment cover, with the side you
want to play or record on against the cover and
the exposed tape facing outward.
Illustration
4. Close the compartment.
To unload the tape, press STOP/EJ to stop recording
or playback, then press STOP/EJ again to open the
cassette compartment so you can remove the tape.
RECORDING
Cautions:
• Do not change the tape speed while recording.
• You will damage the recorder if you force down
REC when an erase-protection tab is not in place
(see “Preventing Accidental Erasure”).
10
14-1180.fm Page 11 Thursday, July 1, 1999 4:34 PM
Normal Recording
1. Set VOX to OFF.
Illustration
2. Load the cassette tape.
3. Set TAPE SPEED as follows:
Illustration
•
•
To 1.2 cm to double the tape’s recording time.
To 2.4 cm for better sound quality.
4. Press REC to begin recording. This also pushes
down PLAY.
Illustration
11
14-1180.fm Page 12 Thursday, July 1, 1999 4:34 PM
5. Adjust VOLUME for the microphone sensitivity.
•
•
Minimum to mid-range for dictation
Mid-range to maximum for recording confer-
ences
6. Place the recorder as close to the sound source
as possible, with nothing between the source
and the recorder to block the sound.
Illustration
7. Press STOP/EJ to stop recording.
Notes:
• The built-in automatic level control automatically
sets the recording level.
• To temporarily stop recording, slide PAUSE to
ON. To resume recording, slide PAUSE back to
its original position.
Illustration
12
14-1180.fm Page 13 Thursday, July 1, 1999 4:34 PM
Voice Activated Recording
1. Set the VOX to ON.
Illustration
2. Load the cassette tape.
3. Set TAPE SPEED as follows:
Illustration
•
•
To 1.2 cm to double the tape’s recording time.
To 2.4 cm for better sound quality.
4. Press REC to record. This also pushes down
PLAY.
Illustration
13
14-1180.fm Page 14 Thursday, July 1, 1999 4:34 PM
5. Adjust VOLUME for the microphone sensitivity
until the sound source’s volume level starts the
recorder.
Illustration
Notes:
•
The built-in automatic level control automati-
cally sets the recording level.
•
The first few sounds start the recorder but
might not be recorded. Say an extra word or
two to begin recording.
•
When the recorder detects silence for 2 to 6
seconds, recording stops temporarily. When
the sound resumes, recording continues.
6. Press STOP/EJ to stop recording.
14
14-1180.fm Page 15 Thursday, July 1, 1999 4:34 PM
Recording with an External Microphone
1. Plug an optional external microphone into the
MIC jack on top of the recorder. The built-in
microphone is automatically disconnected.
Note: Your local RadioShack store has a wide
selection of microphones, designed especially
for microcassette recorders.
2. Follow the steps under “Normal Recording” or
“Voice Activated Recording.”
Quick Record
You can go directly from playback to recording by
pressing REC.
PLAYING A TAPE
Follow these steps to play back a cassette tape.
1. Load the cassette tape.
2. Set TAPE SPEED to the speed you used when
you recorded the tape.
Illustration
15
14-1180.fm Page 16 Thursday, July 1, 1999 4:34 PM
3. Press PLAY.
4. Adjust VOLUME to a comfortable listening level.
5. Press STOP/EJ to stop playback.
Notes:
• To play the other side of the tape, unload it, turn
it over, and reload it.
• To temporarily stop the tape, slide PAUSE to ON.
To resume playback, slide PAUSE downward.
USING FAST-F/CUE
AND REW/REVIEW
Press the switch toward FAST-F/CUE to rapidly move
a tape forward, or toward REW/REVIEW to rapidly
move a tape backward.
Illustration
If you press and hold the switch toward FAST-F/CUE or
REW/REVIEW during playback, you can hear the tape
as it fast-forwards or rewinds. When you release the
switch, the recorder resumes normal playback.
16
14-1180.fm Page 17 Thursday, July 1, 1999 4:34 PM
If you press and hold the switch toward FAST-F/CUE or
REW/REVIEW during recording, the REC button re-
leases. You can hear the tape as it fast-forwards or
rewinds. When you release the switch, the recorder
begins normal playback.
If you press the switch toward FAST-F/CUE or REW/
REVIEW while the tape is stopped, the tape advances
or rewinds until you press STOP/EJ.
Note: When the tape reaches the end, press STOP/EJ
to release the FAST-F/CUE or REW/REVIEW switch.
DIGITAL TAPE COUNTER
1. Load a cassette and rewind it to its beginning.
2. Press the reset button to reset the tape counter
to 000.
Illustration
3. Make a note of the counter readings at the
beginning of each selection (during playback
and recording).
4. Use the counter readings and the FAST-F/CUE—
REW/REVIEW switch to quickly locate a desired
position on the tape.
17
14-1180.fm Page 18 Thursday, July 1, 1999 4:34 PM
USING AN EARPHONE
For private listening, plug an optional earphone with a
1/8-inch plug into the recorder’s EAR jack. This auto-
matically disconnects the recorder’s internal speaker.
Illustration
Note:
Your local RadioShack store has a wide selec-
tion of earphones.
Listening Safely
To protect your hearing, follow these guidelines when
you use earphones.
• Set the volume to the lowest setting before you
begin listening. After you begin listening, adjust
the volume to a comfortable level.
• Do not listen at extremely high volume levels.
Extended high-volume listening can lead to per-
manent hearing loss.
• Once you set the volume, do not increase it.
Over time, your ears adapt to the volume level,
so a volume level that does not cause discom-
fort might still damage your hearing.
18
14-1180.fm Page 19 Thursday, July 1, 1999 4:34 PM
TAPE HINTS
STORING CASSETTE TAPES
Do not expose cassette tapes to high temperatures;
high humidity; dust or dirt; or motors, transformers, or
other sources of strong magnetic fields.
PREVENTING ACCIDENTAL
ERASURE
Most microcassette tapes have an erase-protection
tab for each side of the tape. To protect your record-
ings from being accidentally erased or recorded over,
use a screwdriver to carefully break off the erase-pro-
tection tabs. If you later decide to erase or record over
the tape, place a piece of tape over the holes.
Illustration
Caution:
Removing the erase-protection tabs does
not prevent a tape from being erased by a bulk tape
eraser.
19
14-1180.fm Page 20 Thursday, July 1, 1999 4:34 PM
ERASING A CASSETTE TAPE
If you no longer want a recording, you can record over
it or erase it.
To record over a cassette tape, be sure the erase-
protection tabs are in place. Then simply record as
usual. The recorder records over the previous record-
ing.
You might prefer to use a bulk tape eraser, such as
Cat. No. 44-233, which erases both sides of a micro-
cassette tape in just a few seconds.
RESTORING TAPE TENSION
AND SOUND QUALITY
After you play a cassette tape several times, the tape
might become tightly wound on the reels. This can
cause playback sound quality to deteriorate.
To restore the sound quality, fast-forward the tape
from the beginning to the end of one side, then com-
pletely rewind it. Then loosen the tape reels by gently
tapping each side of the cassette’s outer shell on a flat
surface.
Caution:
Be careful not to damage the cassette when
tapping it. Do not touch the exposed tape or allow any
sharp objects near the cassette.
20
14-1180.fm Page 21 Thursday, July 1, 1999 4:34 PM
MAINTENANCE
Your Optimus Micro-32 Microcassette Tape Recorder
with Voice Activation and Counter is an example of
superior design and craftsmanship. The following
suggestions will help you care for your recorder so
you can enjoy it for years.
• Keep the recorder dry. If it gets wet, wipe it dry
immediately. Liquids can contain minerals that
can corrode the electronic circuits.
• Handle the recorder gently and carefully. Drop-
ping it can damage the circuit boards and case
and can cause the recorder to work improperly.
• Use and store the recorder only in normal tem-
perature environments. Temperature extremes
can shorten the life of electronic devices and
distort or melt plastic parts.
• Keep the recorder away from dust and dirt,
which can cause premature wear of parts.
• Wipe the recorder with a damp cloth occasion-
ally to keep it looking new. Do not use harsh
chemicals, cleaning solvents, or strong deter-
gents to clean the recorder.
• Use only fresh batteries of the recommended
size and type. Always remove old or weak bat-
teries; they can leak chemicals that destroy elec-
tronic circuits.
21
14-1180.fm Page 22 Thursday, July 1, 1999 4:34 PM
Modifying or tampering with the recorder’s internal
parts can cause a malfunction and might invalidate
your recorder’s warranty. If your recorder is not oper-
ating as it should, take it to your local RadioShack
store for assistance.
CLEANING THE TAPE-HANDLING
PARTS
Clean the tape-handling parts after every 20 hours of
use.
With power supplied and the cassette removed, open
the cassette compartment door. Use a pointed object
to gently push the erase protection tab sensor to the
left, and press REC to expose the tape-handling parts.
Use a cotton swab dipped in tape head cleaning solu-
tion or denatured alcohol to gently clean the tape-
handling parts.
Illustration
Or, for easier cleaning, use RadioShack’s microcas-
sette cleaner kit (Cat. No. 44-1168), which includes a
special cleaning cassette.
After you finish cleaning, press STOP/EJ.
22
14-1180.fm Page 23 Thursday, July 1, 1999 4:34 PM
SPECIFICATIONS
Tape System........... 2-Track Monaural Microcassette
Tape Speed ....................... 2.4 cm/sec or 1.2 cm/sec
Recording Time (Total for Both Sides):
MC-60 ..............................60 min @ 2.4 cm/sec
120 min @ 1.2 cm/sec
MC-90 ..............................90 min @ 2.4 cm/sec
180 min @ 1.2 cm/sec
Wow and Flutter..........Less than 0.3% @ 2.4 cm/sec
Erase System .................Permanent Magnet Erasing
Record System ............................................. DC Bias
Power Requirements ..................... 2 AA Batteries, or
120 V AC (With Optional AC Adapter), or
3 V DC (With Optional DC Adapter)
Battery Life*:
Alkaline Batteries ................................12 Hours
Nickel-Cadmium Batteries.....................9 Hours
Dimensions (HWD).................. 51/16 × 1 × 25/8 Inches
(129 × 25.4 × 67 mm)
Weight...............................................................5.8 oz
(164 g)
* Battery life varies depending on temperature,
usage patterns, and other conditions.
Specifications are typical; individual units might vary.
Specifications are subject to change and improve-
ment without notice.
23
14-1180.fm Page 24 Thursday, July 1, 1999 4:34 PM
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing defects in mate-
rial and workmanship under normal use for ninety (90) days from the date of pur-
chase from RadioShack company-owned stores and authorized RadioShack
franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack
MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, IN-
CLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICU-
LAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE
WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PRO-
VIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBIL-
ITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT
TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY
BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY
BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY
DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA,
PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDEN-
TAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN AD-
VISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts or
the exclusion of incidental or consequential damages, so the above limitations or
exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and
the RadioShack sales receipt as proof of purchase date to any RadioShack store.
RadioShack will, at its option, unless otherwise provided by law: (a) correct the
defect by product repair without charge for parts and labor; (b) replace the prod-
uct with one of the same or similar design; or (c) refund the purchase price. All re-
placed parts and products, and products on which a refund is made, become the
property of RadioShack. New or reconditioned parts and products may be used
in the performance of warranty service. Repaired or replaced parts and products
are warranted for the remainder of the original warranty period. You will be
charged for repair or replacement of the product made after the expiration of the
warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to
acts of God, abuse, accident, misuse, improper or abnormal usage, failure to fol-
low instructions, improper installation or maintenance, alteration, lightning or
other incidence of excess voltage or current; (b) any repairs other than those pro-
vided by a RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance
costs; or (f) costs of product removal, installation, set-up service adjustment or
reinstallation.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
RadioShack Customer Relations, Dept. W,
100 Throckmorton St., Suite 600, Fort Worth, TX 76102
3/97
We Service What We Sell
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
7A7
Printed in Hong Kong
|